Proposal to improve and clarify provisions concerning the approval of interior materials, cables and insulation materials. The proposaladds new requirements for cable sleeves and conduits, modifies vertical testing requirements under Annex 8 to allow testing of small test samples and to clarify their fixation to the specimen holder., and adds a new Annex 10 on provisions for testing of electrical cables.
39. The expert from Germany presented updated test requirements for electric cables sleeves and cable conduits (ECE/TRANS/WP.29/GRSG/2016/24 superseding ECE/TRANS/WP.29/GRSG/2016/3). The expert from OICA supported the principles of the proposal, but underlined the need for transitional provisions that give sufficient lead-time for the automotive industry. GRSG reviewed the proposal as reflected in GRSG-111-30-Rev.1. GRSG noted the preference by the experts from CLCCR and OICA to add one additional year (2021 instead of 2020 for all registrations) to the date specified in paragraph 12.13.
40. Finally, GRSG adopted ECE/TRANS/WP.29/GRSG/2016/24 as reproduced in Annex III to this report and requested the secretariat to submit it to WP.29 and AC.1 for consideration at their March 2017 sessions, as draft 03 series of amendments to UN Regulation No. 118.
42. Recalling the discussion on this subject at the previous GRSG session, the expert from Germany introduced ECE/TRANS/WP.29/GRSG/2016/3 proposing updated test requirements for electric cables sleeves and cable conduits. The expert from Finland suggested amending also the test provisions of Annex 8 on the test apparatus and the sample dimensions (GRSG-110-02).
43. Following the discussion, GRSG could not give full consent to the proposals and agreed to have a final review of the proposals at the next session of GRSG. Thus, the secretariat was requested to keep both documents on the agenda unless a revised proposal would be submitted.
| GRSG/2016/3 | |
| GRSG-110-02 | |
| GRSG-111-30/Rev.1 | |
| WP.29/2017/18 |