Proposal to align UN Regulation No. 10 with the proposed amendments to Regulation No. 46 (document GRSG/2015/2) to enable the replacement rear-view mirrors by camera-monitor systems. This proposal is also subject to the consent of the Working Party on Lighting and Light-Signalling (GRE).

Request for task force views with regard to the work on automatic emergency call devices (AECD):

1. Does R10.04 (and any later version) fully cover the EMC aspects for AECD components to be fitted to vehicles and for vehicles with these systems installed/integrated?
2. If not, what amendments can be proposed to Regulation 10?
3. Are specific EMC provisions necessary within the Regulation on AECS?

Proposal to require that the vehicle manufacturer’s statement regarding frequency bands, power levels, antenna positions and installation provisions for the installation of radio frequency transmitters (RF-transmitters) be added to the information document (e.g. under item 63, Annex 2A) to facilitate conformity of production and other compliance checks.

Additional comments related to document EMC-21-03.

FOR INFORMATIONAL PURPOSES ONLY.

Proposal to align the text with the guidelines on UN regulatory procedures and transitional provisions in UN Regulations (document ECE/TRANS/WP.29/1044/Rev.3). Under the guidelines, a UN Regulation (in this case, UN R157) making reference to the provisions of another UN Regulation (in this case, UN R10) shall not require actual approval to that UN regulation but simply refer to the provisions of that UN Regulation.

Proposal to establish items for the 08 series of UN R10: address immunity-related functions required by multiple UN Regulations through discussion of whether to include these features in UN R10 or relocate electromagnetic compatibility provisions to individual UN Regulations; amend test procedures for complex systems including steer-by-wire, brake-by-wire, and ADAS features to establish clear protocols and reduce unlevel playing field items; improve the general approval process through precise vehicle type description and definition of high-level objectives; describe dwell time selection through ISO standard 1154 as minimum; discuss ISO 17025 evaluation principles; discuss antenna position at 3m versus 10m for best-case and worst-case scenarios; and require robust electromagnetic compatibility protection with critical details described in test reports and information documents.

The Netherlands proposes introducing a separate part 2 addressing immunity-related functionality on lateral movement for steer-by-wire and automated driving systems. Harmonics should be tested when issues are observed; in the cited example, step sizes above and below 745–755 MHz and harmonic frequencies at 1500 MHz and 375 MHz require testing. UN R10 should address specific immunity features across multiple UN Regulations, or references should be moved to individual regulations. Test procedures for complex systems like steer-by-wire and brake-by-wire require improvement, including clearer protocols and discussion of specialized technical units. Dwell time must be sufficient to observe all potential fail criteria in agreement between manufacturer and technical service. Antenna switching during testing at 3m versus 10m positions should be forbidden. EMC shielding must be robust and durable, excluding non-integral ferrite blocks and loose components, with critical details recorded in test reports.