Regulation No. 106 contains standardized tyre sizes, which often need to be updated, following the technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.

Proposal to delete a redundant requirement. The paragraphs 2.2. and 2.2.1. are superfluous since paragraph 5.2.2.13. already requires all O4 trailers to be equipped with Anti-lock Braking Systems (ABS) of Category A.

UN R55 informal group proposal for:

1. An amendment for the separation of the procedures to verify towable mass from the procedure of setting and certifying performance values;
2. An amendment that adds procedures to verify towable mass for vehicle combinations that have hitherto not been accounted for in the Regulation;
3. Amendments that adds integrated fixing points for secondary couplings;
4. An amendment that clarifies the procedure to identify worst cases for certification testing;
5. Amendments that removes typos in the current Regulation.

Proposal to add specifications for tyre sizes 33×11.50R20LT, 35×11.50R17LT, 37×13.50R26LT, 36×15.50R20LT and 40×15.50R26LT.

Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technological progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the newly standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.

Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text.

Proposal to amend the annex on complex electronic systems, in particular, to require auditing of the methodologies used to ensure system safety at both concept and system level. Concept level specifically requires consideration of interaction with other vehicle systems.

Proposal to:

1. Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
2. Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
3. Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
4. Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
5. Add information in the certificate to clarify the relationship with the certified products;
6. Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
7. Eliminate redundant marking requirements with the requirement for “@kPa” markings effective from 1 September 2017;
8. Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
9. Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75;