Hungary agrees with the proposed change to the airbag label, but recommends the addition of transitional provisions.

Proposal from Spain on behalf of the CRS Technical Services Group to

• to align paragraph 6.6.3.1. with the 01 series of amendments,
• to align requirements in 7.1.3.1 to test methods in 8.1.2.4.,
• to add tolerances to better define the test method in paragraph 8.1.2.3.,
• to improve the specifications for the measurement of dimensions C and D in Annex 23,
• to align deceleration test requirements with acceleration test provisions (making explicit that it is mandatory to match the corridor for each test, and
• to define the initial acceleration value under paragraph 7.3. against which the maximum deviation restriction is to be applied.

Amendment to the proposals (GRSP/2016/3, GRSP/2016/5, and GRSP/2016/6) to amend the toxicity and flammability declarations via references to EN 71 (European safety standards), taking into account procedures of FMVSS 302. The amendments propose the burning rate values of FMVSS 302 (302.4 inches/102 mm per minute), to harmonize the three proposals with regard to EN standards references, and to incorporate the amendment 1 to EN 71-3 (A1:2014).

Proposal to change the burn-rate in documents GRSP/2016/3, GRSP/2016/5, and GRSP/2016/6 from [250 mm] to the equivalent of the FMVSS 302 specification, i.e., 100 mm.

Updated proposal from the CRS informal group to introduce phase 2 amendments related to the booster-seat CRS category (booster seat with backrest) into UN R129. This document updates the proposal in document GRSP/2016/4.

Proposal to strip ISOFIX CRS provisions from UN R44 and to cease all new type approvals for ISOFIX integral CRS under UN R44 from [November 2016] in deference to UN R129 on Enhanced CRS.

Presentation concerning technical discussions, conclusions, and proposals for CRS bench seat cushion drop tests under UN R44 and UN R129.

Proposal drafted by OICA pursuant to cooperation among the EU, Consumers International, Governmental experts, Euro NCAP, OICA and CLEPA to restructure and simplify the consumer information requirements on the installation of ISOFIX child restraint systems under UN R16.