Proposal to amend para. 6.27.9.1. to exclude direction indicator lamps and dipped-beam headlamps from the 700 cd luminous intensity limitation on or above the HH line when operated as answer-back signals, allowing these devices to operate with their original specifications, while maintaining prohibitions on front fog lamps, rear fog lamps, and stop lamps.

Proposal to amend para. 4.5.5. to permit the internal structure of optical components and the texture of the outer lens of a lamp to incorporate one manufacturer logo built by transparent or non-transparent components, subject to conditions: only the logo of the vehicle manufacturer or body manufacturer brand name is allowed; the enclosed light emitting surface of the logo shall not exceed 100 cm²; graphic marks, emblems, words, or combinations smaller than 5 cm² are not to be considered as a manufacturer logo; the logo light emitting surface does not have to be symmetrical; and stop lamps, direction indicator lamps, reversing lamps, and side-marker lamps shall not incorporate a logo unless the rearmost side-marker lamp is grouped, combined, or reciprocally incorporated with the rear position lamp.

Draft priority work programme for GRE addressing simplification and update of UN Regulations Nos. 48, 53, 74, 86, 148, 149 and 150 to become future proof and technology neutral with performance-based test requirements by 2027; further development of EMC requirements in 08 series of amendments to UN Regulation No. 10 by 2028; reduction of lamp glare with recommendations by 2026; lighting performance visibility and glare prevention by 2027; development of ADS marker lamps for automated vehicles; new LED replacement light sources categories; adaptation to technical progress; energy indicator and lamp test mode by 2027; optical sensor requirements; and sustainability considerations.

Proposal to amend para. 2.4.10. to define a pair for vehicles of categories M, N and O as one or more lamp(s) extending from left to right-hand side, amend para. 2.4.11. and 2.4.12. to define single and multiple lamps and interdependent lamp systems marked Y, amend para. 5.5. and its sub-paragraphs to establish requirements for paired lamps including symmetry and photometric characteristics, amend para. 5.7.2.2. and 5.7.2.3. to specify installation requirements for single lamps, delete para. 5.7.2.4. concerning positioning and length requirements, amend para. 5.18.2. regarding assembly of lamps marked D, add para. 4.7.3. to UN Regulation No. 148 requiring a pair to contain at least one light source on each side, and amend para. 4.8.1.3. to clarify photometric measurement procedures when lamps use multiple light sources.

Proposal to amend para. 6.27.9.1. to exclude direction indicator lamps and dipped-beam headlamps from the 700 cd maximum luminous intensity limitation on or above the HH line when used as answer-back signals, allowing these devices to operate with their original specifications, while maintaining the restriction on front fog lamps, rear fog lamps, and stop lamps.