7. Particle Measurement Programme (PMP)

GRPE will receive a status report from the IWG on PMP.

GRPE-82-35 | PMP: Status report from IWG PMP Status report from IWG PMP
GRPE-82-35 | PMP: Status report from IWG PMP Status report from IWG PMP
GRPE-82-35 | PMP: Status report from IWG PMP Status report from IWG PMP

GRPE may wish to consider an update from the IWG on PMP on the latest draft procedure to measure sub-23nm particulate emissions in the laboratory for heavy duty vehicles.

GRPE-82-29/Rev.1 | PMP: Proposal for sub-23nm particles measurement procedure for HD engines This proposal from IWG PMP is based on the PN measurement procedure laid down in UN R49 but should be considered exclusively a technical working document. The purpose of this document is only to discuss within the PMP group the changes/additions needed to modify the PN cut-off size from 23 to approximately 10 nm and to include raw exhaust sampling
GRPE-82-30 | PMP: Explanatory Note for Sub-23nm particle measurement procedure for HD Engines This explanatory note by IWG PMP, updates on the proposals for solid particle number (SPN) measurements for the type approval of heavy-duty engines. The explanatory note addresses (i) the changes to the current SPN23 methodology, (ii) the proposed changes for the second alternative option to extend the particle size detection range to 10 nm particles, (iii) the proposed changes to allow direct SPN sampling with fixed dilution ratio.
GRPE-82-29/Rev.1 | PMP: Proposal for sub-23nm particles measurement procedure for HD engines This proposal from IWG PMP is based on the PN measurement procedure laid down in UN R49 but should be considered exclusively a technical working document. The purpose of this document is only to discuss within the PMP group the changes/additions needed to modify the PN cut-off size from 23 to approximately 10 nm and to include raw exhaust sampling
GRPE-82-30 | PMP: Explanatory Note for Sub-23nm particle measurement procedure for HD Engines This explanatory note by IWG PMP, updates on the proposals for solid particle number (SPN) measurements for the type approval of heavy-duty engines. The explanatory note addresses (i) the changes to the current SPN23 methodology, (ii) the proposed changes for the second alternative option to extend the particle size detection range to 10 nm particles, (iii) the proposed changes to allow direct SPN sampling with fixed dilution ratio.
GRPE-82-35 | PMP: Status report from IWG PMP Status report from IWG PMP
GRPE-82-01
GRE-82: Schedule of informal meetings in conjunction with GRPE proper session
17 Dec 2020 Working Party Informal Documents Motorcycle Emissions and Fuel Consumption WMTC Measurement procedure for two-wheeled motorcycles equipped with a positive or compression ignition engine with regard to the emission of gaseous pollutants, CO2 emissions and fuel consumption Motorcycle On-Board Diagnostic Systems L-OBD Project to establish a Global Technical Regulation and its homologous UN Regulation for motorcycle and moped on-board diagnostic systems. Mutual Resolution No. 3: Vehicle Interior Air Quality (VIAQ) MR 3: VIAQ Electric Vehicle Environmental Performance Electric Vehicles & the Environment Electric Vehicle Battery Durability EV Battery Durability In-vehicle Battery Durability for Electrified Vehicles Global Real Driving Emissions Test Procedure Global RDE Worldwide harmonized Real Driving Emissions test procedure Durability of L-category Vehicle Pollution Control Devices L-vehicle Pollution Control Durability Requirements for Two- and Three-wheeled Light Motor Vehicles with regard to the Durability of the Pollution Control Devices Non-Exhaust Particle Emissions NEPE GRPE-82-0001
GRPE-82-06
Updated listing of GRPE priorities for 2021
28 Dec 2020 Working Party Informal Documents Diesel and CNG/LNG Engine Emissions Diesel/CNG/LNG Engine Emissions Uniform provisions concerning the measures to be taken against the emission of gaseous and particulate pollutants from compression-ignition engines and positive ignition engines for use in vehicles Motor Vehicle Emissions Motor Vehicle Emissions Uniform Provisions Concerning the Approval of Vehicles with regard to the Emission of Pollutants According to Engine Fuel Requirements Electric Vehicle Battery Durability EV Battery Durability In-vehicle Battery Durability for Electrified Vehicles Global Real Driving Emissions Test Procedure Global RDE Worldwide harmonized Real Driving Emissions test procedure Heavy-Duty Hybrid Vehicle Emissions Heavy-duty Hybrids (HDH) This project, as currently envisioned, would result in an amendment to Global Technical Regulation 4: Worldwide Harmonized Heavy-Duty Emissions Certification Procedure (WHDC). Non-Exhaust Particle Emissions NEPE Particle Measurement Programme PMP GRPE-82-0006