WP.29/2019/107
UN R29: Proposal for Supplement 5 the 03 series of amendments
Source(s)
Date
28 Aug 2019
Status
Adopted
Subject
Impact
03 series of amendments | Supplement 5
Meeting(s)

Proposal to introduce a tolerance for the position of the loading device during the test. The loading device is required to be parallel to the x-y plane of the chassis. This proposal would add a z dimension to the x-y plane and set a tolerance such that the loading device may not deviate by more than 5° along the z-axis.

Downloads
UNECE server
Related documents
GRSP/2019/2
UN R29: Proposal for Supplement 5 to the 03 series of amendments (Superseded)
Excerpts from session reports
GRSP | Session 65 | 13-17 May 2019

24. The expert from Germany introduced ECE/TRANS/WP.29/GRSP/2019/2, proposing tolerances for the position of the loading device during the test. GRSP adopted ECE/TRANS/WP.29/GRSP/2019/2, not amended. The secretariat was requested the secretariat to submit ECE/TRANS/WP.29/GRSP/2019/2 as Supplement 5 to the 03 series of amendments to UN Regulation No. 29, for consideration and vote at the November 2019 sessions of WP.29 and AC.1.

New and Upcoming
System Pages
Regulations
Working Groups
GlobalAutoRegs
© 2026 GlobalAutoRegs