Working Document GRPE/2019/8

Download in .pdf format Download in .docx format

Document Title

UN R83: Proposal for a new Supplement to the 06 and 07 series of amendments

Reference Number

GRPE/2019/8

Origin

OICA

Document Date

26 October 2018

Document Posted

14 November 2018

Meeting Session(s)

GRPE | Session 78 | 7-11 Jan 2019 (Agenda item 3. (a) | Light vehicles: Regulations Nos. 68, 83, 101, and 103)

7. The expert from OICA introduced ECE/TRANS/WP.29/GRPE/2019/8 and GRPE-78-27 clarifying the relationship between approval levels, reference fuels and particulate number limits for positive ignition engines and to modify the calculation formulae for determining evaporative emissions in accordance with changes already agreed in UN GTR No. 19. He stated that GRPE-78-27 superseded GRPE-78-16 and GRPE-78-16 has therefore not been introduced. He stated that some amendments were about harmonizing national legislation and SAE standards. The Chair insisted that ISO or SAE standards should fit the needs of UN Regulations and not that UN Regulations should align with ISO/SAE standards. The representative from the EC opposed to the change on SCR provisions and accepted the other amendments proposed. The representative from the UK and EC sought clarifications on the use of characters to reflect emission levels. The experts from EC and UK proposed minor corrections to ECE/TRANS/WP.29/GRPE/2019/8 and GRPE-78-27 that GRPE adopted as reproduced in Annex IV to the session report.

10. GRPE requested the secretariat to submit Annexes IV and VI of the report to WP.29 and Administrative Committee of the 1958 Agreement (AC.1) for consideration and vote at their June 2019 sessions as draft Supplement 13 and 9 to the 06 and 07 series of amendments to UN Regulation No. 83 respectively. GRPE also requested to submit Annex V of the report to WP.29 and AC.1 for consideration and vote at their June 2019 sessions as draft Corrigendum 1 to Supplement 8 to the 07 series of amendments to UN Regulation No. 83.

Summary

Proposal to clarify the relationship between approval levels, reference fuels and PN limits for PI vehicles and to modify the calculation formulae for determination of evaporative emissions in accordance with changes already agreed in UN GTR No. 19.

Regulations

UN Regulation No. 83 | Motor Vehicle Emissions

Document Status

Superseded

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.