GRSG-112-07/Rev.1
Proposal for Corrigendum 6 to Revision 3 of Regulation No. 43 (France)
Proposal for Corrigendum 6 to Revision 3 of Regulation No. 43
Proposal for editorial corrections to align the definition on plastic glazing between the original English version and the French translation as well as of the communication annex on principal/secondary characteristics for laminated-glass windscreens.
GRSG-112-07/Rev.1
Proposal for Corrigendum 6 to Revision 3 of Regulation No. 43 (France)
Proposal for Corrigendum 6 to Revision 3 of Regulation No. 43
Proposal for editorial corrections to align the definition on plastic glazing between the original English version and the French translation as well as of the communication annex on principal/secondary characteristics for laminated-glass windscreens.
GRSG-112-29
Proposal for amendments to the 01 series of amendments to Regulation No. 43 (OICA)
Proposal for amendments to the 01 series of amendments to Regulation No. 43
Proposal to align UN R43 with GTR 6 and UN R125 with regard to the aiming positions of the driver’s eyes. This proposal corrects inconsistencies introduced during the transposition of GTR 6 into UN R43.
GRSG/2017/6
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43 (Germany)
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43
Proposal to align the headform test with the deceleration measurement and the test of resistance to abrasion with ISO 15082:2016-11, including changes to the test details, correction of the headform calibration values, and the introduction of abrasion reference materials. The latter is combined with an abrasive-wheel qualification and a correction calculation (for plastic materials only).
GRSG/2017/6
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43 (Germany)
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43
Proposal to align the headform test with the deceleration measurement and the test of resistance to abrasion with ISO 15082:2016-11, including changes to the test details, correction of the headform calibration values, and the introduction of abrasion reference materials. The latter is combined with an abrasive-wheel qualification and a correction calculation (for plastic materials only).
GRSG/2017/8
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43 (CLEPA)
Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 43
Proposal to amend Figure 2a of Annex 21 to better reflect the meaning of paragraph 2.4.2.2. of Annex 21, mainly to clarify the lateral limits of any opaque obscuration in this area.