Proposal aims to introduce reversing projections. This proposal intends to introduce the possibility of light-signalling, in form of projection of patterns on the road, for other road users through new light-signalling function
“Reversing projection”.
Proposal also applies for a Supplement to the 06, 07, 08 and 09 series of amendments to UN Regulation No. 48

Proposal to allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers.

Proposal to clarify the duration of the optical indication of the answer-back signal.

Proposal to correct the numbering within paragraph 4.11. and to clarify the CoP provisions in Annex 8.

Proposal to correct and clarify the existing provisions. The proposal aims to allow Category HT and X special warning lamps emitting light in different colours in the same manner as Category T.

Proposal aims to introduce Direction Indicator Projections. This proposal intends to introduce the possibility of light-signalling, in form of projection of patterns on the road, for other road users through new light-signalling function “Direction indicator projection”.
Proposal for a Supplement to the 06, 07, 08 and 09 series of
amendments to UN Regulation No. 48

Proposal to introduce provisions enabling the approval of reversing light projections.

Proposal to introduce introduce new light emitting diode (LED) light source categories LRR8A and LRR8B and to amend provisions in paragraph 3.1, group 1, group 2, and group 3 concerning phase out of certain light source categories.

Proposal to correct an editorial error regarding the markings for light source control gear.

Proposal to improve the accuracy of the instrumental aiming method.

Proposal to clarify the marking requirements for headlamp functions.

Proposal to clarify the calculation method (i.e., rounding down to three digits) for the acceptance criteria in cases where tolerance limits are calculated.

Proposal to clarify the voltage requirements for light-emitting diodes (LED).