|
18 Feb 2011
|
Comments on document GRSG/2011/14 (Italy)
|
GRSG-100-02
|
2011-02-18 |
Italy |
|
6 Apr 2011
|
Revised comments on document GRSG/2011/14 (Italy)
|
GRSG-100-02/Rev.1
|
2011-04-06 |
Italy |
|
14 Apr 2011
|
Additional proposal to GRSG/2011/15 (Italy)
|
GRSG-100-28
|
2011-04-14 |
Italy |
|
26 Sep 2013
|
Presentation of a proposal to amend Regulation No. 67 (Italy)
|
GRSG-105-07
|
2013-09-26 |
Proposal for LPG dual-fuel vehicle provisions. Italy |
|
5 Oct 2019
|
UN R67: Proposal for amendments (Italy)
|
GRSG-117-15
|
2019-10-05 |
Proposal to align UN Regulation No. 67 with ISO 19825 by changing the name of the light vehicle Euro filling unit to K15 and inserting a new profile J15 into Annex 9. Italy |
|
6 Oct 2020
|
UN R67: J15 LPG Filing Unit (Italy)
|
GRSG-119-25
|
2020-10-06 |
Italy |
|
13 Apr
|
UN R67: Proposal for a new supplement to the 04 series of amendments (Italy)
|
GRSG-131-19
|
2026-04-13 |
Proposal clarifies the test procedure of endurance test for pressure regulators. Italy |
|
9 Feb 2011
|
Proposal for amendments to Regulation No. 67 (Italy)
|
GRSG/2011/15
|
2011-02-09 |
Italy |
|
22 Jan 2020
|
UN R67: Proposal for an amendment (Italy)
|
GRSG/2020/9
|
2020-01-22 |
GRSG to review the text prepared by the expert from Italy to amend UN R67 to introduce the new filling unit profile “J15” as specified in ISO 19825 and to align with the same standard the naming of Euro filling unit. Italy |
|
25 Aug 2022
|
UN R67: Proposal for Supplement 3 to the 03 series of amendments and for Supplement 2 to the 04 series of amendments (Italy)
|
GRSG/2022/21
|
2022-08-25 |
Proposal aims to prevent the installation of the filling unit under the body of M1 vehicles. Italy |
|
14 Jul
|
UN R67: Proposal for a Supplement 4 to the 04 series of amendments (Italy)
|
GRSG/2026/35
|
2026-07-14 |
Proposal to amend Annex 16, para. 9.6. to clarify the endurance test procedure for pressure regulators and vaporizers by specifying that the outlet of the regulator shall be plugged during cycling of the inlet pressure from 100 per cent to 50 per cent of classification pressure at room temperature and at high and low temperatures. The regulator shall withstand 50,000 cycles without failure and remain leak proof after testing at temperatures of −20 °C, room temperature, and +120 °C. Italy |