| Other documents |
WP.29/2017/34 | Proposal for Supplement 16 to Regulation No. 91
|
Proposal for Supplement 16 to Regulation No. 91
|
|
Reference Number: WP.29/2017/34
|
|
Proposal to - insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
- update the Conformity of Production (CoP) requirements,
- reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,
- clarify the definition of “type”, with regard to manufacturer, trade names and marks,
- introduce editorial improvements to the requirements for markings,
- remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and
- refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.
This proposal consolidates UN R91 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
|
|
Meeting Sessions: 171st WP.29 session (14-17
Mar 2017)
|
|
Document date: 20 Dec 16
|
|
Document status: Adopted text published
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2017/34) was adopted by the World Forum. Thirty-six Contracting Parties out of the 44 applying UN R91 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
WP.29-171-03 | Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0
|
Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0
|
|
Reference Number: WP.29-171-03
|
|
Proposals for amendments to Regulations Nos. 4, 6, 7, 19, 23, 38, 48, 50, 77, 87, 91, 98, 112, 113, 119, 123 to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to UN Regulation No. 0. The proposed UN R0 on whole vehicle type approval requires submission of approval certificates for components and systems. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). This set of proposed amendments introduces provisions for light-source approvals under the device regulations.
|
|
Submitted by: EU
|
|
Meeting Sessions: 171st WP.29 session (14-17
Mar 2017)
|
|
Document date: 07 Feb 17
|
|
Document status: Superseded
|
|
Relevant to
UN Regulation No. 0 | International Whole Vehicle Type Approval System (IWVTA), UN Regulation No. 4 | Illumination of rear-registration plates of motor vehicles and their trailers, UN Regulation No. 6 | Direction Indicators, UN Regulation No. 7 | Position, Stop and End-outline Lamps, UN Regulation No. 19 | Front Fog Lamps, UN Regulation No. 23 | Reversing Lights, UN Regulation No. 38 | Rear Fog Lamps, UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment, UN Regulation No. 50 | Position and Indicator Lamps for Motorcycles, UN Regulation No. 77 | Parking Lamps, UN Regulation No. 87 | Daytime Running Lamps, UN Regulation No. 91 | Side-Marker Lamps, UN Regulation No. 98 | Headlamps Equipped with Gas-discharge Light Sources, UN Regulation No. 112 | Headlamps Emitting an Asymmetrical Passing Beam, UN Regulation No. 113 | Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type, UN Regulation No. 119 | Cornering Lamps, UN Regulation No. 123 | Adaptive Front-lighting Systems, and WP.29 Regulatory Project | Simplification of Lighting Regulations
|
|
View full document file for more information
|
WP.29/2017/34 | Proposal for Supplement 16 to Regulation No. 91
|
Proposal for Supplement 16 to Regulation No. 91
|
|
Reference Number: WP.29/2017/34
|
|
Proposal to - insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
- update the Conformity of Production (CoP) requirements,
- reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,
- clarify the definition of “type”, with regard to manufacturer, trade names and marks,
- introduce editorial improvements to the requirements for markings,
- remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and
- refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.
This proposal consolidates UN R91 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
|
|
Meeting Sessions: 171st WP.29 session (14-17
Mar 2017)
|
|
Document date: 20 Dec 16
|
|
Document status: Adopted text published
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2017/34) was adopted by the World Forum. Thirty-six Contracting Parties out of the 44 applying UN R91 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
WP.29/2017/34 | Proposal for Supplement 16 to Regulation No. 91
|
Proposal for Supplement 16 to Regulation No. 91
|
|
Reference Number: WP.29/2017/34
|
|
Proposal to - insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
- update the Conformity of Production (CoP) requirements,
- reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,
- clarify the definition of “type”, with regard to manufacturer, trade names and marks,
- introduce editorial improvements to the requirements for markings,
- remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and
- refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.
This proposal consolidates UN R91 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
|
|
Meeting Sessions: 171st WP.29 session (14-17
Mar 2017)
|
|
Document date: 20 Dec 16
|
|
Document status: Adopted text published
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2017/34) was adopted by the World Forum. Thirty-six Contracting Parties out of the 44 applying UN R91 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
WP.29-171-03 | Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0
|
Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0
|
|
Reference Number: WP.29-171-03
|
|
Proposals for amendments to Regulations Nos. 4, 6, 7, 19, 23, 38, 48, 50, 77, 87, 91, 98, 112, 113, 119, 123 to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to UN Regulation No. 0. The proposed UN R0 on whole vehicle type approval requires submission of approval certificates for components and systems. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). This set of proposed amendments introduces provisions for light-source approvals under the device regulations.
|
|
Submitted by: EU
|
|
Meeting Sessions: 171st WP.29 session (14-17
Mar 2017)
|
|
Document date: 07 Feb 17
|
|
Document status: Superseded
|
|
Relevant to
UN Regulation No. 0 | International Whole Vehicle Type Approval System (IWVTA), UN Regulation No. 4 | Illumination of rear-registration plates of motor vehicles and their trailers, UN Regulation No. 6 | Direction Indicators, UN Regulation No. 7 | Position, Stop and End-outline Lamps, UN Regulation No. 19 | Front Fog Lamps, UN Regulation No. 23 | Reversing Lights, UN Regulation No. 38 | Rear Fog Lamps, UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment, UN Regulation No. 50 | Position and Indicator Lamps for Motorcycles, UN Regulation No. 77 | Parking Lamps, UN Regulation No. 87 | Daytime Running Lamps, UN Regulation No. 91 | Side-Marker Lamps, UN Regulation No. 98 | Headlamps Equipped with Gas-discharge Light Sources, UN Regulation No. 112 | Headlamps Emitting an Asymmetrical Passing Beam, UN Regulation No. 113 | Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type, UN Regulation No. 119 | Cornering Lamps, UN Regulation No. 123 | Adaptive Front-lighting Systems, and WP.29 Regulatory Project | Simplification of Lighting Regulations
|
|
View full document file for more information
|
|