previous meeting next meeting
Geneva
(Latest 22 May 2018)
| Agenda | Formal | Informal |

The deadline for the submission of official working documents for this session is 12 January 2018. At this session, GRSG is expected to consider forming a new informal working group to develop fire risk reduction requirements for M2/M3 vehicles.

Attendance

1. The Working Party on General Safety Provisions (GRSG) held its 114th session from 9 to 13 April 2018 in Geneva. The meeting was chaired by Mr. A. Erario (Italy). Experts from the following countries participated in the work, following Rule 1(a) of the Rules of Procedure of the World Forum for Harmonization of Vehicle Regulations (WP.29) (TRANS/WP.29/690, ECE/TRANS/WP.29/690/Amends.1 and 2):

  1. Belgium
  2. Canada
  3. China
  4. Czechia
  5. Finland
  6. France
  7. Germany
  8. Hungary
  9. India
  10. Italy
  11. Japan
  12. Kuwait
  13. Latvia
  14. Netherlands
  15. Norway
  16. Poland
  17. Republic of Korea
  18. Romania
  19. Russian Federation
  20. San Marino
  21. South Africa
  22. Spain
  23. Sweden
  24. Turkey and
  25. United Kingdom of Great Britain and Northern Ireland (United Kingdom).
An expert from the European Commission (EC) participated. Experts from non-governmental organizations participated:
  1. European Association of Automotive Suppliers (CLEPA)
  2. European Liquefied Petroleum Gas Association (AEGPL)
  3. International Motorcycle Manufacturers Association (IMMA)
  4. International Organization of Motor Vehicle Manufacturers (OICA)
  5. International Road Transport Union (IRU)
  6. Natural Gas Vehicles Association Europe (NGVA Europe) and
  7. International Association for Natural Gas Vehicles (NGV Global).
Upon the special invitation of the Chair, experts from the International Association of the Body and Trailer Building Industry (CLCCR), Natural Gas Vehicles Italy (NGV Italy) and International Association for Public Transport (UITP) participated.

1. Adoption of the agenda

2. GRSG considered and adopted the agenda proposed for the 114th session.

3. GRSG also adopted the running order (GRSG-114-01) as proposed by the Chair. GRSG noted GRSG-114-13 on the main decisions and recommendations of the World Forum taken during its November 2017 and March 2018 sessions (ECE/TRANS/WP.29/1135 and 1137).

4. The informal documents distributed during the session are listed in Annex I to the session report. The GRSG informal working groups are listed in Annex VI.

GRSG-114-01 | GRSG: Running order of the agenda for the 114th (April 2018) session
GRSG-114-13 | General information and GRSG highlights from the November 2017 and March 2018 WP.29 sessions
GRSG/2018/1 | Provisional agenda for the 114th GRSG session The annotated version of the agenda will be published later as an addendum to this document.
GRSG/2018/1/Add.1 | Annotated provisional agenda for the 114th GRSG session
2. (a) Amendments to regulations on buses and coaches: Regulation No. 107 (M2 and M3 vehicles)

5. The expert from Poland introduced GRSG-114-05 on a possible error in Annex 11 of the Regulation and on aligning it with Annex 3 by deleting paragraphs 3.3.1.2.1. to 3.3.1.2.2.2. The expert from France added that the corresponding paragraphs in Annex 3 had been removed through ECE/TRANS/WP.29/2008/98 on Supplement 3 to the 02 series of amendments to UN Regulation No. 107. Thus, the Chair invited experts to verify the historical development of these provisions. GRSG agreed to resume consideration of this subject at its next session and to keep GRSG-114-05 on the agenda as a reference document.

GRSG-114-05 | UN R107: Draft proposals for Supplement 8 to the 06 series of amendments and for Supplement 7 to the 05 series of amendments Proposal to align Annex 11 with Annex 3 following the removal of paragraphs in the latter regarding the marking of a vehicle with respect to the mass of baggage (done via Corrigendum 1 to Revision 6). This proposal would delete the same requirements (paragraphs 3.3.1.2.1, 3.3.1.2.2., 3.3.1.2.2.1. and 3.3.1.2.2.2) from Annex 11.

6. GRSG considered in detail GRSG-114-16, tabled by the expert from Italy, that proposed new provisions for the possible approval of innovative equipment other than a platform to improve the accessibility of people with reduced mobility, particularly on coaches. The expert from the United Kingdom expressed concerns about coaches equipped with such optional equipment. He explained that these vehicles could not be type approved as they would not fulfil the full accessibility requirements of the Regulation e.g. the access of wheelchair users. The expert from Finland supported the position and underlined that such lifts cannot be considered as equivalent equipment to a platform, as the wheelchair user would have to vacate the wheelchair. The expert from Germany underlined that there is no need to type-approve such optional equipment, which could be retrofitted to different types of vehicles. Finally, GRSG agreed to resume consideration of this subject at its next session in October 2018 and to keep GRSG-114-16 on the agenda as a reference document.

GRSG-114-16 | UN R107: Proposal for Supplement 3 to the 07 series of amendments Proposal to enable to approval of vehicles equipped with mechanisms other than platforms intended to assist access by persons with reduced mobility. The purpose is to avoid hindering innovation in offering solutions to persons with reduced mobility. The proposal add "lift" to the examples of possible mechanisms and modifies the language to be less specific in references to "wheelchairs" to address persons with reduced mobility regardless of whether they use a wheelchair.
2. (b) Amendments to regulations on buses and coaches: Regulation No. 118 (Burning behaviour of materials)

7. The expert from France introduced GRSG-114-11 on the two task force meetings held in Paris on 29 January 2018 and in Brussels on 13 March 2018. He added that after detailed consideration of a technical report on French accident investigations, of the synthesis of the UN Regulations Nos. 107 and 118, as well as of additional research results, the task force had concluded on the need to establish a new Informal Working Group (IWG) on the behaviour of the general construction of M2 and M3 vehicles in a fire event (BMFE). GRSG endorsed the request of the task force and welcomed their recommendations to further develop both UN Regulations, taking into account the preventative measures to mitigate and even avoid such accidents in future. The GRSG Chair thanked France for the offer to chair the IWG and OICA for the commitment to ensure the secretariat services of the IWG. He announced the intention to seek, at its session in June 2018, the consent of WP.29 to set up the new IWG on BMFE.

GRSG-114-11 | Behaviour of M2 and M3 general construction in case of Fire Event (BMFE) Report on the task force sessions held to discuss the potential for improvements in the safety of M<sub>2</sub> and M<sub>3</sub> vehicles in the event of fire.

8. Furthermore, the expert from France presented the draft terms of reference and the rules of procedures for the new IWG on BMFE (GRSG-114-12). The expert from OICA supported the proposal and suggested further improvements to the text (GRSG-114-24). GRSG revised the proposal (GRSG-114-24-Rev.1) and adopted the terms of reference and rules of procedures as reproduced in Annex II to the session report. The expert from France thanked GRSG for the support and announced the organization of a further meeting of the task force on 15 June 2018 (venue at VDA in Berlin).

GRSG-114-12 | UN R118: Terms of reference for a new informal group on M2 and M3 vehicle fire event safety Draft Terms of Reference and Rules of Procedure of the GRSG informal working group on the behaviour of M2 and M3 general construction in case of fire event (BMFE) pursuant to discussions held since the last GRSG session.
GRSG-114-24/Rev.1 | UN R18: OICA comments on the terms of reference for the informal group on the behaviour of M2 & M3 vehicles in case of fire event (BMFE) OICA comments on document GRSG-114-12.

9. GRSG agreed to resume consideration of this subject at its next session.

3. Regulation No. 34 (Prevention of fire risks)

10. The expert from France introduced ECE/TRANS/WP.29/GRSG/2018/4 to clarify and to align, in the three languages, the provisions of UN Regulation No. 34 on the protection of the tank in a collision. GRSG noted a number of comments.

11. Following discussions, GRSG adopted ECE/TRANS/WP.29/GRSG/2018/4 as reproduced in Annex III to this report. The secretariat was requested to submit it to WP.29 and AC.1 as draft Supplement 6 to the 02 series of amendments and as draft Supplement 2 to the 03 series of amendments to UN Regulation No. 34 for consideration at their November 2018 sessions.

GRSG/2018/4 | UN R34: Proposal for Supplement 6 to the 02 series of amendments and for Supplement 2 to the 03 series of amendments Proposal to clarify the test requirements in alignment with the French text of the regulation by amending paragraph 5.10 to read "Tanks shall be installed in such a way as to be protected from the consequences of a collision to the front or the rear of the vehicle; there shall be no protruding parts, sharp edges, etc. <strike>near</strike> <b>nearby all around</b> the <strike>tank</strike> <b>tanks</b>." The proposal aims to clarify the inspection of potentially protruding parts around the tanks in order to ensure their integrity in the event of a collision.
4. Amendments to safety glazing regulations

12. The expert from the Republic of Korea, Chair of the IWG on Panoramic Sunroof Glazing (PSG), introduced GRSG-114-22 on the progress of the group during its ninth meeting on 9 April 2018. He added that, due to budget constraints, none of the expected research and testing activities on ceramic printer areas of glazing material had started. He concluded that the PSG experts had requested an extension of the mandate of the IWG (from June 2018 to April 2020).

13. GRSG endorsed the request and encouraged the group to continue with the work. The GRSG Chair volunteered to seek the endorsement from WP.29 at the June 2018 session to extend the mandate of the IWG on PSG by two years. GRSG agreed to resume consideration of this subject at its session in October 2018.

GRSG-114-22 | GTR 6: Progress report of the PSG informal group
4. (a) Amendments to safety glazing regulations: Global Technical Regulation No. 6 (Safety glazing)

14. The expert from India preferred to present GRSG-114-20 under item 4.(b) below.

GRSG-114-20 | UN R43: Proposal to amend the draft Supplement 8 to the 01 series of amendments Proposal to amend GRSG/2018/7 by adding the marking "/D" to signify laminated-glass panes subjected to the 2,260 g ball test and the headform test.
4. (b) Amendments to safety glazing regulations: Regulation No. 43 (Safety glazing)

15. The expert from Finland introduced ECE/TRANS/WP.29/GRSG/2018/7 on the installation of the laminated-glass panes with improved mechanical properties on vehicles. The expert from Poland introduced GRSG-114-04 that proposed to align the new requirements with the general structure of the Regulation. The expert from India suggested using the same terminology as in the Regulation (GRSG-114-20). GRSG noted a general preference for the optional use of the new provisions and a preference to submit them to the World Forum as a Supplement. GRSG adopted ECE/TRANS/WP.29/GRSG/2018/7 in reference to GRSG-114-23-Rev.1, as reproduced in Annex IV to the session report. The secretariat was requested to submit it to WP.29 and AC.1 as draft Supplement 8 to the 01 series of amendments to UN Regulation No. 43 for consideration at their November 2018 sessions.

GRSG-114-04 | UN R43: Proposal to amend the draft Supplement 8 to the 01 series Proposal to clarify the text of document GRSG/2018/7 submitted to enable the approval of the laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle. The proposal would amend Annex 7 (laminated-glass panes), inserting a new paragraph 6. to allow optional 2,260 g ball test and headform test for laminated-glass panes.
GRSG-114-20 | UN R43: Proposal to amend the draft Supplement 8 to the 01 series of amendments Proposal to amend GRSG/2018/7 by adding the marking "/D" to signify laminated-glass panes subjected to the 2,260 g ball test and the headform test.
GRSG-114-23/Rev.1 | UN R43: Proposal for Supplement 8 to the 01 series of amendments Proposal as finalized during the April 2018 GRSG session to amend Annex 7 (laminated-glass panes), inserting a new paragraph 6 to allow optional 2,260 g ball test and headform test for laminated-glass panes. The proposal adds the marking “/D” to signify laminated-glass panes subjected to the 2,260 g ball test and the headform test. The proposal aims to enable the approval of laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle.
GRSG/2018/7 | UN R43: Proposal for Supplement 8 to the 01 series of amendments Proposal to amend Annex 7 (laminated-glass panes), inserting a new paragraph 6. to allow optional 2,260 g ball test and headform test for laminated-glass panes. The proposal aims to amend UN R43 to enable the approval of the laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle.

16. GRSG recalled the purpose of GRSG-114-20 to align UN GTR No. 6 on safety glazing and invited the expert from India to submit, in due time, an official proposal for consideration by GRSG at its next session. The expert from India volunteered to take over the technical sponsorship of this amendment and to submit, to WP.29 and AC.3 at their June 2018 sessions, an official request for authorization to amend UN GTR No. 6.

GRSG-114-20 | UN R43: Proposal to amend the draft Supplement 8 to the 01 series of amendments Proposal to amend GRSG/2018/7 by adding the marking "/D" to signify laminated-glass panes subjected to the 2,260 g ball test and the headform test.
5. Awareness of the proximity of Vulnerable Road Users

17. GRSG noted the oral report by the expert from EC on the progress of the IWG on Awareness of Vulnerable Road Users Proximity (VRU-Proxi). He recalled the purpose of GRSG-113-27, presented at the previous GRSG session, on the need to collect detailed accident data. He re-iterated his invitation to the government experts to provide such national accident data, which would allow a clear vision of worldwide accidents and a selection of the best road safety approach for development by the IWG.

GRSG-113-27 | VRU-Proxi matrix of accident data collection Request by the VRU-Proxi informal group for data on close proximity maneuvering collisions with vulnerable road users.
5. (a) Awareness of the proximity of Vulnerable Road Users: Regulation No. 46 (Devices for indirect vision)

18. The expert from OICA introduced GRSG-114-25-Rev.1, superseding ECE/TRANS/WP.29/GRSG/2018/9, which aligned the French text with the English, and which clarified the requirements of paragraph 16.1.1.3. on overlays in Camera Monitor Systems (CMS) according to the decisions of the IWG on CMS. The proposal received general support.

19. GRSG adopted the proposal as reproduced below. The secretariat was requested to submit it to WP.29 and AC.1 as draft Supplement 6 to the 04 series of amendments to UN Regulation No. 46 for consideration at their November 2018 sessions.

English version, paragraph 16.1.1.3., amend to read:

16.1.1.3.Overlay requirements within the minimum required field of vision
Overlays shall display only safety-related rearward vision information.
All overlays shall …… worst case(s).

French version, paragraph 16.1.1.3., amend to read:

16.1.1.3Prescriptions concernant les surimpressions dans le champ de vision minimal requis
Les surimpressions ne doivent afficher que des informations de vision vers l’arrière relatives à la sécurité.
Toutes les surimpressions doivent …… la moins favorable.

GRSG-114-25/Rev.1 | UN R46: OICA proposal to correct document GRSG/2018/9 Proposal to correct the draft text to align with the latest version of UN R46. GRSG/2018/4 aims to clarify the circumstances under which the provision of information through overlays is permissible.
GRSG/2018/9 | UN R46: Proposal for Supplement 6 to the 04 series of amendments Proposal to clarify that overlays may only be used to convey "safety-related rearward vision information." The proposal addresses confusion regarding circumstances under which the provision of information through overlays is permissible. The proposal also amends the French text. The overall proposal aims to make clear that overlays may convey safety information regarding the rearward environment of the vehicle and are not necessarily limited only to when the vehicle is moving in reverse. The proposal also aims to restrict the information to rear-vision safety. Other information, not related to the rear view, should never appear within the defined field of view.
5. (b) Awareness of the proximity of Vulnerable Road Users: New Regulation on Blind Spot Information Systems (BSIS)

20. The expert from Germany recalled the purpose of ECE/TRANS/WP.29/GRSG/2017/11 and reported on the outcome of the IWG on VRU-Proxi (GRSG-114-21). The IWG had recommended enlarging the scope of the new UN Regulation on vehicles of categories M2 and M3. The expert from OICA stated that this amendment was premature and that accident data did not yet justify a broader scope to vehicles of categories M2 and M3. GRSG noted that, for some regions, the need was based on general safety provisions.

21. The expert from the United Kingdom supported the proposal in general, but pointed out that drivers could possibly disconnect such warning systems. He underlined the need for further research on the effectiveness of such information systems, especially Human-Machine Interface (HMI).

22. The expert from Germany stated his intention to review the proposal and to submit, in due time, a revised proposal for consideration by GRSG at its October 2018 session.

GRSG-114-21 | BSIS: Proposal for a new UN Regulation concerning the approval of motor vehicles with regard to the Blind Spot Information System Draft regulation proposed by the VRU-Proxi informal working group.
GRSG/2017/11 | Proposal for a new Regulation on uniform provisions concerning the approval of motor vehicles with regard to the Blind Spot Information System Proposal to establish requirements for Blind Spot Information Systems (BSIS) intended to be fitted in heavy goods vehicles to protect vulnerable road users. This proposal is based on GRSG-109-19 and explained in presentations GRSG-110-18-Rev.1 and GRSG-111-24.
6. Amendments to gas-fuelled vehicle regulations

23. The expert from Germany introduced GRSG-114-08 on the recent meeting of the task force on gas-fuelled vehicle regulations held in Cologne (Germany) on 6 and 7 February 2018. He added that progress had been good on UN Regulation No. 110, but the amendments to UN Regulation No. 67 were still under considerations.

GRSG-114-08 | Report on the 1st meeting of the GRSG Task Force on "Gas-fueled vehicle regulations" The target of the meeting was to define essential periodic inspection requirements to be respected when installing gaseous fuel components into a vehicle, and to clarify the material requirements for components inside the LPG tank. The work addressed UN R67 and UN R110. No further meetings are planned at this time.
6. (a) Amendments to gas-fuelled vehicle regulations: Regulation No. 67 (LPG vehicles)

24. The expert from Poland introduced ECE/TRANS/WP.29/GRSG/2018/8 on simplifying and adapting the Regulation to technical progress, specifically for the definition of a type of container and Annex 2B. On the removal of text in the communication form marked in strikethrough, a number of experts preferred to be in line with other UN Regulations and to keep the strikethrough text. The experts from Italy and AEGPL raised study reservations. GRSG noted concerns on the proposal and suggestions on the optional use of versions and variants in the communication form as the Regulation only specifies a definition for type of container, but not for accessories. After discussion, the expert from AEGPL volunteered to prepare with other stakeholders, a new proposal for consideration at the next GRSG session.

GRSG/2018/8 | UN R67: Proposal for Supplement 16 to the 01 series of amendments

25. The expert from Germany recalled the outcome of the task force (para. 23 above) on ECE/TRANS/WP.29/GRSG/2017/16 and presented GRSG-114-09 proposing amendments to the Regulation. GRSG noted general support and some comments. Finally, GRSG considered a revised proposal (GRSG-114-09-Rev.1) and adopted ECE/TRANS/WP.29/GRSG/2017/16 as reproduced in Annex V to the session report. The secretariat was requested to submit the proposal to WP.29 and AC.1 as draft 02 series of amendments to UN Regulation No. 67 for consideration at their November 2018 sessions.

GRSG-114-09/Rev.1 | UN R67: Proposal for the 02 series of amendments Proposal developed by the Gas-fueled Vehicle Regulations Task Force to facilitate periodic inspections of gas containers through better visibility. In addition, Germany suggests adding that paragraph to allow a Contracting Party or a regional organization of Contacting Parties like the EU to refuse national or regional type-approval and to refuse first registration of a vehicle type affected by the changes introduced by the 02 series of amendments but not meeting those stipulations. Paragraph 22.13 is an addition to paragraph 22.9. giving more stress to aspects of national and regional type-approval and of first registration of vehicles.
GRSG/2017/16 | Proposal for the 02 series of amendments to Regulation No. 67 Proposal to improve the specifications for LPG multi-valves in response to an LPG vehicle fire that resulted in injuries to first responders. A German Type Approval Authority (KBA) analysis concluded that the hose connecting the PRV/PRD of the multi-valve to the gaseous phase was damaged and hose-fragments blocked both PRV and PRD such that pressure could not be adequately reduced. The PRV and PRD were activated, but the fragments considerably reduced the effective section of the relevant tubing and prevented the release of pressure. This proposal aims to prevent such occurrences.

26. The expert from OICA introduced ECE/TRANS/WP.29/GRSG/2018/2 on amending the provisions of the ageing test in Annex 15 of UN Regulation No. 67 and on the results of the ageing of material (e.g. rubber hoses) that is in contact with LPG. GRSG invited the task force to resume consideration of this subject and to submit in due time a proposal for consideration at the next GRSG session. ECE/TRANS/WP.29/GRSG/2018/2 would be kept on the agenda as a reference document.

GRSG/2018/2 | UN R67: Proposal for Supplement 16 to the 01 series of amendments Alternative solution from OICA to the German proposal GRSG/2017/16 regarding visibility/access requirements for PRV/PRD-related components in order to improve maintenance and reduce the risk of critical failures of pressure relief devices. The proposal also proposes amending provisions of the ageing test in Annex 15 in response to concerns over failures of rubber hoses.

27. Recalling the purpose of ECE/TRANS/WP.29/GRSG/2017/22, the expert from Turkey volunteered to review the proposal and to submit in due time a new official document for consideration at the next GRSG session.

GRSG/2017/22 | Proposal for the amendments to Regulation No. 67 Proposal to insert new provisions on the location on the vehicle of the filling unit, marking of the LPG container date of production, and a limitation on the maximum service life of LPG containers to 15 years.
6. (b) Amendments to gas-fuelled vehicle regulations: Regulation No. 110 (CNG and LNG vehicles)

28. The expert from Germany introduced GRSG-114-10 on the outcome of the task force on ECE/TRANS/WP.29/GRSG/2017/17 which was on improving the provisions for installing and inspecting Compressed Natural Gas (CNG) cylinders or Liquefied Natural Gas (LNG) tanks and their accessories. The expert from Italy preferred a more accurate inspection of such containers without the removal of structural parts (GRSG-114-19). After discussion, GRSG agreed to add design requirements that allow easy periodical technical inspections. The expert from the Netherlands requested that container manufacturers provide more detailed recommendations for periodical technical inspections and for periodic requalification tests, and requested that these recommendations be stored and made available for all inspections.

GRSG-114-10/Rev.1 | UN R110: Proposal for the 03 series of amendments Proposal developed by the Gas-fueled Vehicle Regulations Task Force to facilitate periodic inspections of gas containers through better visibility. In addition, Germany suggests adding a paragraph to allow a Contracting Party or a regional organization of Contacting Parties like the EU to refuse national or regional type-approval and to refuse first registration of a vehicle type affected by the changes introduced by the 03 series of amendments but not meeting those stipulations. Paragraph 24.22. is an addition to paragraph 22.18. giving more stress to the aspects of national and regional type-approval and of first registration of vehicles.
GRSG-114-19 | UN R110: Proposal for the 03 series of amendments Proposal to allow for the removal of non-structural parts and accessories in fulfilling the accessibility/inspection provisions of UN R110.
GRSG/2017/17 | Proposal for the 03 series of amendments to Regulation No. 110 Proposal for a new series of amendments to UN Regulation No. 110 to improve the specifications for the installation and inspection of CNG cylinders and of LNG tanks and their accessories. This proposal addresses incidents caused by cylinder corrosion. The proposal aims to reinforce the requirements for adequate cylinder protection and for sufficient access to the cylinder and its accessories to allow regular visual inspection.

29. The expert from OICA presented GRSG-114-26 proposing to amend the specifications for inspection of CNG-cylinders / LNG-tanks and their accessories. GRSG did not support the proposal.

GRSG-114-26 | UN R110: Proposal for amendments with regard to visual inspections Proposal to delete the reference to visual inspection under the support straps of the cylinders from the text under consideration. Such inspection would require dismantling of the cylinder installations which would contravene the consensus decision to avoid such exhaustive dismantling.

30. Finally, GRSG considered a revised proposal (GRSG-114-10-Rev.1) and adopted ECE/TRANS/WP.29/GRSG/2017/17 as reproduced below. The secretariat was requested to submit the proposal to WP.29 and AC.1 as draft Supplement 1 to the 03 series of amendments to UN Regulation No. 110 for consideration at their November 2018 sessions.

Insert a new paragraph 18.1.6.1., to read:

18.1.6.1.Notwithstanding the provisions of paragraph 18.1.6., it shall be possible to make an external inspection (e.g. for Periodic Technical Inspection) of the CNG cylinder or LNG tank and their accessories according to the specifications of the manufacturer, without the use of tools to dismantle, but with visual aids, e.g. lamps, mirrors or endoscopes.

GRSG-114-10/Rev.1 | UN R110: Proposal for the 03 series of amendments Proposal developed by the Gas-fueled Vehicle Regulations Task Force to facilitate periodic inspections of gas containers through better visibility. In addition, Germany suggests adding a paragraph to allow a Contracting Party or a regional organization of Contacting Parties like the EU to refuse national or regional type-approval and to refuse first registration of a vehicle type affected by the changes introduced by the 03 series of amendments but not meeting those stipulations. Paragraph 24.22. is an addition to paragraph 22.18. giving more stress to the aspects of national and regional type-approval and of first registration of vehicles.
GRSG/2017/17 | Proposal for the 03 series of amendments to Regulation No. 110 Proposal for a new series of amendments to UN Regulation No. 110 to improve the specifications for the installation and inspection of CNG cylinders and of LNG tanks and their accessories. This proposal addresses incidents caused by cylinder corrosion. The proposal aims to reinforce the requirements for adequate cylinder protection and for sufficient access to the cylinder and its accessories to allow regular visual inspection.

31. The expert from Italy, in reference to ECE/TRANS/WP.29/GRSG/2017/29, proposed to amend Annex 3A of the Regulation, i.e. the test requirements for the periodic requalification of CNG cylinders to avoid structural failures during their service life (GRSG-114-32), including new provisions for a mandatory impact damage test for all cylinders without the use of shoulder pads. GRSG welcomed the specific test reports provided by Italy on CNG4 cylinders (GRSG-114-07, GRSG-114-14, GRSG-114-15). GRSG noted concerns and comments. Finally, GRSG agreed to refer it to the task force and to resume consideration of this subject at its next session on the basis of a revised official document.

GRSG-114-07 | UN R110: Information in support of GRSG/2017/29 Italy research on type CNG4 cylinders in support of the proposal to require that covers be removed in cases where ogive protective covers are fitted to a cylinder before conducting the impact damage (drop) test (document GRSG/2017/29).
GRSG-114-14 | UN R110: Specific tests on CNG4 cylinders- Provider 1
GRSG-114-15 | UN R110: Specific tests on CNG4 cylinders - Provider 2
GRSG-114-32 | UN R110: Presentation on amendments with regard to CNG4 cylinders
GRSG/2017/29 | Proposal for amendments to Regulation No. 110 Proposal to require, in instances where ogive protective covers are fitted to a cylinder, that the covers be removed before conducting the impact damage (drop) test.

32. The expert from NGV Global introduced ECE/TRANS/WP.29/GRSG/2018/3 that proposed to correct Table 6.4 on the cylinder design qualification tests. GRSG adopted the proposal and requested the secretariat to submit the proposal to WP.29 and AC.1, for consideration at their November 2018 sessions, as Corrigendum 1 to Revision 3 of UN Regulation No. 110.

GRSG/2018/3 | UN R110: Proposal for Corrigendum 1 to Revision 3 In the absence of complete harmonization with ISO 11439, this proposal recommends that Table 6.4 of UN R110 should be amended by the following for CNG-1 designs:<ol class="alpha"><li>Delete A.17, A.25, and A.7 since they do not match the tests specified in paragraph 7.5 on Cylinder design qualification tests</li><li>Add A.15 and A.6 since they do match the tests specified in paragraph 7.5 on Cylinder design qualification tests</li><li>Add A.24 because paragraph 6.9 on Fire protection requires all PRDs on all cylinder types to comply with A.24.</li></ol>

33. The expert from the Netherlands presented GRSG-114-03 on new requirements for components used in LNG/CNG systems such as the “CNG accumulator” and the “CNG compressor”. GRSG noted no objection on the proposal and agreed to consider it in detail at its next session on the basis of an official document.

GRSG-114-03 | UN R110: Proposal for amendments Proposal to introduce requirements for CNG compressor and CNG accumulator components designed to maintain stable pressure in fuel systems. See also documents GRSG-113-24 and 25 from the previous GRSG session.

34. The expert from the Netherlands introduced GRSG-114-06 to allow the use of gas fuelled generators to provide electrical power for accessories or other vehicle systems. The expert from the United Kingdom suggested simplifying the text and referring to a secondary engine only. GRSG noted the general support for GRSG-114-06-Rev.1 and requested the secretariat to circulate it with an official symbol at the next GRSG session for a final review.

GRSG-114-06/Rev.1 | UN R110: Proposal for amendments to reduce venting via new technologies Proposal to allow the use of a generator fueled by the vehicle gaseous fuel system that provides electricity to run accessories (e.g., overnight power in sleeper cabs, to maintain battery charge during high electrical power use with loading or lifting equipment). This proposal would allow for the use of LNG/CNG from vehicle fuel tanks and thereby reduce the potential need to vent gas into the air in response to pressure buildup due to warming over time by using the gas to power other devices and equipment.

35. The expert from OICA sought the advice of GRSG on GRSG-114-27 that adapts the text of the Regulation to the current technology on the gas flow adjustor in the carburettor or injector. GRSG endorsed the proposal in principle and agreed to resume consideration at the next session of GRSG on the basis of an official document.

GRSG-114-27 | UN R110: Proposal for amendments concerning gas flow adjuster Proposal to amend and clarify the need for a gas flow adjuster under UN R110 with regard to the use of carburetors and fuel injectors. A gas flow adjuster is not necessary when an electronic fuel injection system manages the air/fuel mixture and therefore should be removed from paragraph 18.3.1. An adjuster is needed when air/fuel mixture runs via a carburetor and therefore should be added to paragraph 18.3.2.
7. Regulation No. 73 (Lateral protection devices)

36. GRSG recalled the evolution study of UN Regulation No. 73 from the previous session (GRSG-113-11-Rev.1). The expert from France proposed to improve the performance level of Lateral Protection Devices (LPD) for a better protection of vulnerable road users (ECE/TRANS/WP.29/GRSG/2018/5). The expert from the Russian Federation raised concerns on the lack of detailed statistical data on fatalities in the event of a lateral impact and on the impact of these amendments for vehicles in regions with specific climate and/or road conditions. The expert from OICA endorsed the concerns raised by the Russian Federation. He noted that the proposed geometrical dimensions might result in other difficulties or risks. He concluded that some derogation would be necessary for special purpose vehicles.

37. Following a detailed consideration of ECE/TRANS/WP.29/GRSG/2018/5, GRSG welcomed the offer by France to organize a dedicated meeting prior to the forthcoming GRSG session to further discuss and clarify the remaining issues.

38. GRSG agreed to resume consideration of this subject at its next session in October 2018 and requested the secretariat to keep ECE/TRANS/WP.29/GRSG/2018/5 and GRSG-113-11-Rev.1 on the agenda as reference documents.

GRSG/2018/5 | UN R73: Proposal for the 02 series of amendments Proposal to amend geometrical criteria (dimensions and distances between lateral protection devices) and installation provisions for lateral protection barriers in order to improve their performance with regard to vulnerable road users. The proposal would<ol class="alpha"><li>increase the maximum distance between lateral rails from 300 mm to 400 mm</li><li>redefine the limits for the lower edge from "550 mm above the ground" to definition via an isosceles triangle formed by lines drawn at 8° from the ground contact points of the vehicle tires intersecting at point "I" above the road surface where the maximum limit "I" is between 350-450 mm</li><li>define the upper edge as from 450 mm rather than 300 mm maximum from the vehicle structure or maximum height of the upper edge above the ground from 950 mm to 850 mm</li><li>update the horizontal static force requirement for lateral protection devices to 3 kN and the deflection under load criteria to 90 mm over the rearmost 250 mm of the device and 450 mm over the remainder of the device.</li></ol> The purpose is to reduce the risk of running over a person (e.g., a motorcycle rider) during a lateral collision.
8. Regulation No. 116 (Anti-theft and alarm systems)

39. The expert from OICA, in his capacity of GRSG Ambassador to the IWG on the International Whole Vehicle Type Approval (IWVTA), informed GRSG about the splitting of UN Regulation No. 116. He recalled the purposes of (a) ECE/TRANS/WP.29/GRSG/2017/23 which contains the prescriptions for devices against un-authorized use as an amendment to UN Regulation No. 116, (b) ECE/TRANS/WP.29/GRSG/2017/24 as a new draft UN Regulation on vehicle immobilizers and (c) ECE/TRANS/WP.29/GRSG/2017/25 as a new draft UN Regulation on vehicle alarm systems. After detailed consideration of GRSG-114-28 (superseding ECE/TRANS/WP.29/GRSG/2017/24), GRSG agreed to adopt the three separate UN Regulations at the same time. The secretariat was requested to circulate GRSG-114-28 as a revision to the official document for consideration at the October 2018 session of GRSG.

GRSG-114-28 | UN R116: Proposal for a new UN Regulation on vehicle immobilizers Proposal to separate requirements for vehicle immobilizers into a new UN Regulation (from UN R116) in order to facilitate the inclusion of anti-theft regulations in UN R0 on whole vehicle type approvals.
GRSG/2017/23 | Proposal for amendments to Regulation No. 116 Proposal from the IWVTA informal group to limit the scope of UN R116 to the protection of motor vehicles against unauthorized use and the approval of devices to prevent unauthorized use (while establishing new regulations to incorporate the provisions concerning alarm systems and immobilizers)
GRSG/2017/24 | Proposal for a new UN Regulation concerning the approval of immobilizers Proposal from the IWVTA informal group to extract provisions from UN R116 into a new UN Regulation concerning the approval of immobilizers and the approval of a vehicle with regard to its immobilizer.
GRSG/2017/25 | Proposal for a new UN Regulation concerning the approval of vehicle alarm systems Proposal from the IWVTA informal group to extract provisions from UN R116 into a new UN Regulation concerning the approval of vehicle alarm systems and the approval of a vehicle with regard to its vehicle alarm system.
GRSG/2017/25/Corr.1 | Vehicle alarm systems: Corrigendum to the proposal for a new UN Regulation Correction to document GRSG/2017/25 (Proposal for a new UN Regulation on uniform provisions concerning the approval of vehicle alarm systems and approval of a vehicle with regard to its vehicle alarm system) submitted by the GRSG secretariat.

40. The expert from OICA introduced GRSG-114-29 to clarify the provisions on the environmental testing of keys with respect to components that are not embedded in the vehicle. The expert from France underlined the need to also align some further requirements in the text of the Regulation. He offered to prepare, in due time and jointly with the expert from OICA, a revised proposal for consideration at the next session as an official document.

GRSG-114-29 | UN R116: Proposal for amendments Proposal to clarify that anti-theft-related vehicle components such as keys are not subject to the environmental tests (section 6.4.) of UN R116 which were established for components embedded in the vehicle.

41. The expert from OICA presented GRSG-114-30 on the removal of references to the European standards on frequencies in UN Regulation No. 116, as the specifications on radio transmission were not yet harmonized and still regulated nationally or regionally. The expert from the United Kingdom recommended a broader consideration of radio transmissions and interconnectivity at the level of WP.29. GRSG noted that the IWG on Intelligent Transport System / Automated Driving was currently considering, on a horizontal level, issues such as vehicle interconnectivity, cyber security and “over-the-air” updates. GRSG agreed to resume consideration of this subject at its next session and invited the secretariat to circulate GRSG-114-30 with an official symbol.

GRSG-114-30 | UN R116: Proposal for Supplement 6 to the original series of amendments Proposal to remove references to European radio frequency standards (paragraphs 6.2.3., 7.2.3. and 8.2.2.). Telecommunications devices must meet requirements specific to local markets. Therefore, the references to standards specific to European markets (but not other markets) fall outside the purview of UN Regulations.
9. Regulation No. 121 (Identification of controls, tell-tales and indicators)

42. The expert from the Russian Federation presented GRSG-114-17 on aligning the Russian text of UN Regulation No. 121 with the English version. GRSG adopted the proposed text as reproduced below and requested the secretariat to submit it to WP.29 and AC.1, for consideration at their November 2018 sessions, as Corrigendum 1 to Revision 2 of UN Regulation No. 121.

Russian version only, paragraph 2.4., correct to read:

2.4«Общее пространство» означает участок, на котором могут отображаться, но не одновременно, не менее двух информационных функций (например, условных обозначений).

Russian version only, paragraph 5.5.1.4., correct to read:

5.5.1.4если контрольный сигнал, указывающий на неисправность тормозной системы, дальнего света, указателей поворота или ремней безопасности отображается в каком-либо общем пространстве, то он должен замещать любое другое условное обозначение в данном общем пространстве, в случае возникновения базового условия для его включения;

GRSG-114-17 | UN R121: Proposal for a Corrigendum Proposal to correct the Russian text of the regulation.

43. Recalling discussions at the previous GRSG session on the handling of colour changes of controls, tell-tales and indicators, the expert from OICA presented ECE/TRANS/WP.29/GRSG/2018/6 as a long-term solution. He explained that the proposal aimed to remove the references in Table 1 to footnote 18 and to only keep the reference to standard ISO 2575:2004. GRSG noted study reservations by the experts from France and the United Kingdom. GRSG agreed to resume consideration of this subject at its next session.

GRSG/2018/6 | UN R121: Proposal for Supplement 10 to the original series of amendments and Supplement 2 to the 01 series of amendments Proposal pursuant to discussions on the application of footnote <sup>18</sup> under Table 1 concerning tell-tale symbols and the use of colours to convey different meanings. ISO standard 2575-2004, para. 5.1. allows for the use of different colours to convey a change in the operating condition. This proposal would remove the current footnote <sup>18</sup> text and application of the footnote to telltales 2, 9-12, and 19 pending a decision on the proposal to apply a revised footnote to the master lighting switch (tell-tale 1). Paragraph 5.4.1.1. of UN R121 references ISO 2575-2004 which was developed to simplify the application of UN R121 when colour changes are adopted in other UN Regulations; however, OICA submits that the footnote which references ISO 2575-2004 in relation to specific lighting devices or systems creates a degree of confusion. (If approved, this proposal would likely impact Supplement 3 to the 01 series rather than Supplement 2 given that WP.29 at its November 2017 session adopted the proposal to add a telltale and symbols for “Accident Emergency Call System (AECS)” and to align UN R121 with the 07 series of amendments to UN Regulation No. 16 as Supplement 2 to the 01 series.)
10. Regulation No. 122 (Heating systems)

44. GRSG noted that there was no new information on this subject and agreed to remove this item from the agenda of the next session.

11. Accident Emergency Call Systems (AECS)

45. GRSG noted that WP.29/AC.1 had adopted, in November 2017, the new UN Regulation No. 144 on AECS and that the new Regulation was expected to enter into force on 19 July 2018.

46. The expert from OICA introduced GRSG-114-35 to clarify the scope of the Regulation as intended by the IWG on AECS. Thus, he suggested adding subparagraphs (f) and (g) to paragraph 1.2. to align the scope of the Regulation with the provisions of UN Regulations Nos. 94 (Frontal impact) and 95 (Side impact). He added that this clarification was necessary for vehicles within the scope of these UN Regulations on passive safety, but which were not equipped with airbags. GRSG noted study reservations and comments that the current scope was already drafted in that sense. Finally, the expert from OICA volunteered to submit, in due time, a revised proposal for consideration at the next GRSG session, taking into account the comments and the discussions at the IWG meetings.

GRSG-114-35 | UN R144: Proposal for amendments Proposal to confirm that M<sub>1</sub> vehicles not fitted with a side airbag are outside the scope of UN R144.

47. The expert from IRU gave a presentation (GRSG-114-34) on the possible development of the new UN Regulation No. 144. He suggested extending the scope of the Regulation to heavy goods vehicles, buses and coaches. He added that further documentation, such as information on cargo or on the number of passengers, could be circulated, in case of an accident, to the emergency services and could in this respect ease the operator’s decision on dispatching emergency actions. GRSG welcomed the presentation and noted a number of reservations from a lack of information on implementation benefits. The expert from the Russian Federation informed GRSG that the requirements on emergency call equipment for heavy goods vehicles, buses and coaches were already covered by the Customs Union regulations. The expert from Finland reminded GRSG about the evaluation report on “eCall systems” under the European Union Regulation No. 2015/758, that was expected to be published by the European Commission on 31 March 2021 at the latest.

GRSG-114-34 | eCall for heavy goods vehicles

48. GRSG agreed that it was premature to resume work on further development of UN Regulation No. 144 before its entry into force and in the absence of concrete proposals. GRSG agreed to resume consideration on this subject at its forthcoming session.

12. International Whole Vehicle Type Approval (IWVTA)

49. GRSG noted the adoption by WP.29/AC.1 of UN Regulation No. 0 on IWVTA (ECE/TRANS/WP.29/2017/108) and its expected date of entry into force on 19 July 2018. GRSG also noted the adoption by WP.29 of (i) the explanation document on UN Regulation No. 0 (ECE/TRANS/WP.29/2017/109), (ii) the general guidelines for UN regulatory procedures and transitional provisions in UN Regulations (ECE/TRANS/WP.29/2017/107, Add.1 and Corr.1 as amended by para. 53 of the report ECE/TRANS/WP.29/1135) and (iii) the “Question&Answer” document on Revision 3 of the 1958 Agreement (ECE/TRANS/WP.29/2017/131).

WP.29/2017/107 | Draft General Guidelines for United Nations regulatory procedures and transitional provisions in UN Regulations Proposal from the IWVTA informal group to supersede the current guidelines for regulatory procedures and transitional provisions for UN Regulations (document WP.29/1044 and its Revision 1) with updated general guidelines for establishing or amending UN Regulations, including for the definition of scope, administrative and transitional provisions, use of alternative requirements, and cross-referencing with other regulations. This proposal aims to <ol class="alpha"><li>Streamline future work without superseding provisions of the 1958 Agreement and the existing UN Regulations,</li><li>Clarify rulemaking procedures pursuant to Revision 3 of the 1958 Agreement, and</li><li>Ensure "good regulatory practice" through clarifications to avoid divergence between the interpretation of Revision 3 and the application to UN Regulations.</li></ul>
WP.29/2017/107/Add.1 | Draft General Guidelines for United Nations regulatory procedures and transitional provisions in UN Regulations
WP.29/2017/107/Corr.1 | Corrigendum to the draft General Guidelines for United Nations regulatory procedures and transitional provisions in UN Regulations
WP.29/2017/108 | Draft UN Regulation No. 0 on uniform provisions concerning the International Whole Vehicle Type Approval Proposal submitted by the informal working group on the International Whole Vehicle Type Approval for the establishment of UN Regulation No. 0 regarding the approval of whole vehicles within the framework of the 1958 Agreement. The regulations would establish an International Whole Vehicle Type Approval (IWVTA) scheme whereby Contracting Parties adhering to the Regulation may issue approvals to either a limited level (L-IWVTA) or to a wider range of technical topics included in the universal level (U-IWVTA). Contracting Parties are able to apply the limited or universal IWVTA depending upon the national situation. The Universal-IWVTA (U-IWVTA) provides a greater level of certainty for vehicle manufacturers and Contracting Parties applying this UN Regulation, as the approval has to be accepted without further assessment of the technical items covered by the U-IWVTA issued. Contracting Parties applying this UN Regulation are not obliged to accept approvals to the limited level (L-IWVTA) but may do so at their choice. However, they have also to accept approvals issued pursuant to U-IWVTA. The UN Regulation includes the administrative obligations of the IWVTA scheme. It does not establish separate technical requirements but instead refers to the provisions of the separate UN Regulations.
WP.29/2017/109 | Explanation to UN Regulation No. 0 on the International Whole Vehicle Type Approval - Questions and answers
WP.29/2017/131 | Revision 3 of the 1958 Agreement - Questions and answers

50. The expert from Poland introduced GRSG-114-33 on the inconsistency of the new provisions on the numbering of UN type approvals in accordance with Schedule 4 and the existing format of the communication form annexed to the UN Regulations that still requests the extension number to be filled in. GRSG agreed that this was a horizontal issue affecting all UN Regulations annexed to the 1958 Agreement and recommended referring this subject to the IWG on IWVTA for consideration at their June 2018 meeting. The expert from Poland volunteered to attend the forthcoming IWVTA meeting and present the issue.

GRSG-114-33 | 1958 Agreement: Proposal for an amendment to the approval Communication forms Proposal to align the Communication forms with regard to the separation of approval numbers and extension numbers with the provisions of Revision 3 of the 1958 Agreement (E/ECE/TRANS/505/Rev.3) Schedule 4.
13. (a) Other business: UN Regulation No. 62 (Anti-theft for mopeds/motorcycles)

51. The expert from Germany introduced GRSG-114-02 which inserts new provisions on electromechanical and electronic devices to prevent unauthorized use. He added that the type approval of such smart key systems could also be an option for UN Regulation No. 116. GRSG noted general support and agreed to resume consideration of this subject at its next session in October 2018 on the basis of an official document.

GRSG-114-02 | UN R62: Proposal for Supplement 3 Proposal to expand the scope of the regulation on unauthorized L-category vehicle use to include electronic devices such as keyless entry systems, similarly to what already exists in UN R116 on passenger car use.
13. (b) Other business: Any other business

52. The expert from the Russian Federation introduced GRSG-114-18 which proposes to align the Russian text of UN Regulation No. 60 (Driver operated controls for mopeds/motorcycles) with the English version.

53. GRSG adopted the proposed text as reproduced below and requested the secretariat to submit it to WP.29 and AC.1, for consideration at their November 2018 sessions, as Corrigendum 1 to Revision 1 of UN Regulation No. 60.

Russian version only, paragraph 2.29., correct to read:

2.29«Общее пространство» означает участок, на котором могут отображаться, но не одновременно, не менее двух информационных функций (например, условных обозначений).

GRSG-114-18 | UN R60: Proposal for Corrigendum Proposal to correct the Russian text of the regulation.

54. The expert from OICA introduced GRSG-114-31 to align the text of UN Regulation No. 105 (ADR vehicles) with that of the new provisions of the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR), edition 2019, adopted by the Working Party on the Transport of Dangerous Goods (WP.15).

55. GRSG adopted the proposed text as reproduced below and requested the secretariat to submit it to WP.29 and AC.1, for consideration at their November 2018 sessions, as draft Supplement 1 to the 06 series of amendments to UN Regulation No. 105, subject to a final review by GRSG at its October 2018 session.

Paragraph 5.1.1.2.1., amend to read:

5.1.1.2.1.Cables

No cable in an electrical …… shall be adequately insulated.

The cables shall be suitable for the conditions in the area of the vehicle, such as temperature range and fluid compatibility conditions as they are intended to be used.
……
Cables shall be securely …… and thermal stresses.


Paragraph 5.1.1.9.1., amend to read:<tr style="vertical-aling:top>
5.1.1.9.1.(a) Those parts of the electrical …… for use in hazardous areas.

Such equipment shall meet the general requirements of IEC 600794, parts 0 and 14 and the additional requirements applicable from IEC 60079, parts 1, 2, 5, 6, 7, 11, 15, 18, 26 or 28.

GRSG-114-31 | UN R105: Proposal for Supplement 1 to 06 series of amendments Proposal to align UN R105 with provisions adopted by the Working Party on the Transport of Dangerous Goods (WP.15) under the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR), edition 2019.
13. (c) Tributes to Messrs. J. Kownacki and F. Boulay

56. Learning that Mr. Jerzy Kownacki (Poland) would retire, GRSG thanked him for his considerable contributions over the last decades to the activities of GRSG. GRSG recognized his commitment with a long applause and wished him a long and happy retirement.

57. GRSG noted that M. François Boulay (OICA) would take over new activities in his organization and would, therefore, no longer attend the sessions. GRSG acknowledged his continued support and contributions during the long period of participation in the sessions and wished him all the best for his future activities.