Working Document WP.29/2019/64

Download in .pdf format Download in .docx format

Document Title

GTR 19: Proposal for Amendment 2

Reference Number

WP.29/2019/64

Origin

Document Date

15 April 2019

Document Posted

19 April 2019

Meeting Session(s)

WP.29 | Session 178 | 24-28 Jun 2019 (Agenda item 14.3. | Proposal for Amendment 2 to UN GTR No. 19 (Evaporative Test emission procedures for the Worldwide harmonized Light vehicles Test Procedures (EVAP WLTP)))

142. Submitted for consideration and vote, the proposal for Amendment 2 to UN GTR No. 19 – Evaporative test emissions procedures for the Worldwide harmonized Light vehicles Test Procedures (EVAP WLTP) (ECE/TRANS/WP.29/2019/64, ECE/TRANS/WP.29/2019/65 and ECE/TRANS/WP.29/AC.3/44) was adopted on 26 June 2019 by consensus vote of the following contracting parties present and voting:

Australia
China
European Union, representing
- Cyprus
- Finland
- France
- Germany
- Hungary
- Italy
- Lithuania
- Luxembourg
- Netherlands
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden and
- United Kingdom
India
Japan
Kazakhstan
Nigeria
Norway
Republic of Korea
Russian Federation
San Marino and
South Africa.

143. The representatives from Canada and the United States of America abstained from voting.

Summary

Proposal to introduce improvements and amendments concerning the evaporative emission family definitions and the Type 4 test procedures with regard to test equipment requirements and calibrations, evaporative emission measurement enclosures, and use of variable volume SHED facilities

Regulations

GTR No. 19 | Motor vehicle evaporative emissions

Document Status

Adopted text published

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.