Session Report GRPE/78/Add.2

Download in .pdf format Download in .docx format

Document Title

Addendum 2 to the report of GRPE on its 78th session

Reference Number

GRPE/78/Add.2

Origin

Document Date

22 March 2019

Document Posted

25 March 2019

Meeting Session(s)

GRPE | Session 78 | 7-11 Jan 2019 (Agenda item 3. (b) | Light vehicles: Global Technical Regulations Nos. 15 (WLTP) and 19 (WLTP EVAP))

15. As introduced by the secretary of the task force on evaporative emissions, GRPE also adopted ECE/TRANS/WP.29/GRPE/2019/4 (amended by GRPE-78-28) as reproduced in Addendum 2 to this report, proposing draft Amendment 2 to the UN GTR No. 19 (WLTP EVAP) as well as the corresponding report on the development of this amendment (GRPE-78-09) as reproduced in Annex VIII. GRPE requested the secretariat to submit Addendum 2 and Annex VIII to WP.29 and AC.3 for consideration and vote at their June 2019 sessions as draft Amendment 2 to UN GTR No. 19.

WP.29 | Session 178 | 24-28 Jun 2019 (Agenda item 3.2. | Working Party on Pollution and Energy (GRPE) (Seventy-eighth session, 8-11 January 2019))

41. The World Forum recalled the report of the Chair of GRPE on its seventy-eighth session (ECE/TRANS/WP.29/GRPE/78) and approved the report.

Summary

Amendment 2 to UN GTR No. 19 (WLTP EVAP) as approved by GRPE based upon documents GRPE/2019/4 and GRPE-78-28.

Regulations

GTR No. 19 | Motor vehicle evaporative emissions

Document Status

Superseded

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.