Presentation of a concept for accelerated tire wear testing using a standard truck with independent steering on left and right sides. The method employs steering actuators from existing steered rear axles to create longitudinal and lateral slip, accelerating tire wear while maintaining representative behavior. Reference tire and test specimen can be mounted on separate axles to compare wear rates.

Test findings from seven circuits in the Republic of Korea show that estimated SRTT17S abrasion levels at 20 °C exceeded the specified range of 25–75 mg/(kmt) at six of the seven circuits tested. These results indicate that conducting UN R186 tyre abrasion tests in the Republic of Korea on circuits that meet the current range would be challenging at present. The Republic of Korea suggests reviewing the suitability of the current circuit abrasion level range and commits to support efforts to establish a circuit abrasion level range applicable to circuits worldwide.

Presentation of ZF’s tread wear tester for C3 tires, available for operation in Passau until at least September 2029. ZF intends to operate the test rig in cooperation with fka for method development, validation, and correlation with on-road testing. The machine will be fully operational at ZF with climate chamber, cooling and filtering, and powder supply, with target operational date Q1 2027. FKA plans to acquire the machine and operate it at the ZF site for the first few years.

Progress report on the Task Force on Tyre Abrasion covering February to October 2026. Work on UN Regulation on tyre abrasion for C1 tyres has concluded, with new UN R186 adopted at WP.29’s 199th session in June 2026, implementing a two-stage approach with initial application from 30 June 2028 and increased stringency from 30 June 2033. C2 test method development is ongoing with formal working document postponed to February 2027; C3 tyre work commenced with brainstorming session in October 2026 targeting working document in February 2027. The Task Force proposes conversion to an Informal Working Group.

Document presents preliminary views on minimum performance requirements for in-vehicle battery durability under Euro 7 heavy-duty vehicle standards. It outlines implementation timeline for the OMNIBUS proposal in first and second phases, with application dates of 1 January 2030 for the first phase and 1 January 2035 for the second phase. Brake emissions and tyre abrasion requirements are addressed, including UN Regulation No. 186 application dates for C2 and C3 class tyres. Reporting and review provisions under Article 18 are included. The document notes that the order of items and timeline indications are preliminary and for discussion purposes only.

Status update on Euro 7 implementation for light-duty and heavy-duty vehicles. For LDV (M₁, N₁), application begins 30 months after Euro 7 entry into force for new types (29 November 2026) and 42 months for all new vehicles (29 November 2027). For HDV (M₂, M₃, N₂, N₃, O₃, O₄), application begins 48 months after entry into force for new types (29 May 2028) and 60 months for all new vehicles (29 May 2029). Small Volume Manufacturers comply from 1 July 2030 (M₁, N₁) and 1 July 2031 (M₂, M₃, N₂, N₃). Brake emissions apply 1 January 2030 for LDV and 1 January 2030–1 January 2035 for HDV. Tyre abrasion (UN R186) applies 1 July 2028 for C1 class tyres, 1 April 2030 for C2 class, and 1 April 2032 for C3 class.

Document outlining the 1st DETA/IWVTA Workshop held on 17 June 2026 in Flensburg, Germany. The workshop covered presentations on what DETA and IWVTA are, industry and government expectations, and issuance and acceptance of IWVTA certificates in the EU. Survey responses from 15 participants, including from Southeast Asian countries, indicated needs for more explanation on DETA access rights, onboarding processes for new Contracting Parties, and clearer guidance on how IWVTA can be modified to suit individual markets. Suggestions included developing supporting materials and guidelines on IWVTA application procedures and organizing a second workshop in Japan or Asia.

Report on the Task Force on Tyre Abrasion’s work from February to October 2026. Foundational methodologies for C1 tyres were adopted and incorporated into a new UN Regulation 186 on tyre abrasion, with a two-stage implementation approach requiring new tyre type approvals from 30 June 2028 and mandatory approval from 30 June 2030, with fitting of pre-June 2030 tyres on vehicles permitted until 30 June 2032, and stage 2 introducing tighter limits with new approvals from 30 June 2033 and mandatory approval from 30 June 2035. C2 test method development is ongoing with an informal document presentation targeting February 2027 submission of a formal working document. For C3 tyres, a brainstorming session was planned for October 2026 in Brussels to develop simplified test methods before physical testing, focusing initially on long-haul and regional 22.5-inch tyres.

Record of Webex participants attending the TA-52-11 meeting over two days, listing participants’ names, affiliations, and join and leave times for each session.

Provisional agenda for the 52nd session of the IWVTA Informal Group scheduled for November 12, 2026 in Paris. The session will address election of a new Chair, adoption of the agenda and 51st session report, highlights from the 199th WP.29 session, amendments to UN R0 series, contradiction between transitional provisions in UN R22 and Revision 3 of the 1958 Agreement, proposed amendments to Guidelines on Transitional Provisions, IWVTA awareness and promotion, extension of mandates, and DETA scheme implementation.

Discussion of R.E.3. revision 8 adopted by WP.29 in November 2025, which allows vehicle manufacturers to apply for new approvals for software versions on registered vehicles. The Netherlands raised concerns about compatibility with type approval principles, the 1958 Agreement, and EU law, citing issues with traceability, multiple approvals for one type, approval requirements for non-production vehicles, and product marking. The document proposes distinguishing between ‘live’ approvals for new vehicles using normal type approval procedures and ‘legacy’ approvals for in-service vehicles using an updated revision concept, with updates to Schedule 3 of the 1958 Agreement and R.E.3. revision 9.