Draft amendments to UN R53 (based on SLR-71-07, SLR-71-7, SLR-66-01, SLR-73-07, SLR-75-05, and WP.29/2024/30) updates the baseline document for the 05 series of amendments. Key changes include: simplification of definitions and general specifications; consolidation of individual specifications; addition of EV inclusion and failure provisions; editorial harmonization with UN R48 baseline regarding hyphenation, terminology, and formatting; replacement of “visual failure tell-tale” with “tell-tale indicating failure” and “rear-end collision alert signal” with RECAS; standardization of vehicle category references; adoption of scientific notation with lumens; simplification of paragraphs 6.4 and 6; and revision of the transitional provisions.

Baseline document for amending UN R74 (based on WP.29/2024/91, SLR-71-07, SLR-71-7, SLR-66-01, and SLR-73-07). Key changes include: simplifying definitions; using “type-approved” and “type-approval” with hyphens per UN R48; replacing “vehicle type (moped)” with “type of vehicles of category L₁”; adding hyphenation to “direction-indicator lamp”; deleting “above” from paragraph references; clarifying UN R48 series; removing “to this Regulation” after Annex references; applying scientific notation for lumens; including electric vehicles; revising individual and general provisions; correcting signal lamp category errors; and using category symbols instead of lamp function names.

Based on SLR-76-03-Rev1 for R48 and tentatively applying WP.29/2024/76, IMMA presents transitional provisions for UN R53. The document outlines provisions applicable to all amendment series, including that Contracting Parties may grant type-approvals according to any preceding series and shall continue granting extensions of existing approvals. For the 05 series of amendments, specific dates establish when Contracting Parties shall accept or refuse type-approvals, with exceptions for equipment, parts, and unaffected vehicle systems.

This document proposes draft provisions for a 05 series, updating the previous baseline (SLR-71-07). Key changes include simplification of definitions by referencing UN R48 where applicable; consolidation of geometric visibility requirements with uniform formatting; incorporation of electric vehicle (EV) provisions; inclusion of rear-end collision alert signal (RECAS); replacement of legacy terminology with hyphenated forms (e.g., “direction-indicator lamp,” “type-approved”); use of scientific notation for luminous intensity values; and reduction of transitional provisions to retain only the 05 series requirements. Annex 3 has been reserved and deleted. The regulation applies to the installation of lighting and light-signalling devices on motorcycles and prescribes mandatory and optional devices with specifications for position, geometric visibility, orientation, electrical connections, and tell-tales. Transitional provision dates remain undecided.

The document considers options for the Communication form of UN R53 regarding whether to include the UN R48 series number. Option 1 retains the current form without the series number. Option 2 adopts the current Baseline document style. Option 3 adds an area in the comment section. Option 4 invites other ideas. Feedback is requested on which option should be adopted.

Proposal to amend UN R53:

• Simplify para. 2 by deleting vehicle type definition and consolidating definitions from UN Regulation No. 48,
• Consolidate para. 5 general specifications by reorganising lamp positioning requirements into para. 5.5. and 5.6., restructuring geometric visibility provisions, and clarifying electrical connections,
• Consolidate para. 6 individual specifications by standardising positioning formats into minimum/maximum height tables and reformatting geometric visibility angles into upwards/downwards/outwards/inwards notation,
• Delete para. 5.20. as its content moves to para. 5.6.,
• Delete Annex 3 as its content references UN Regulation No. 48,
• Simplify transitional provisions by deleting para. 11.1. through 11.11. and para. 11.12. and replacing with new para. 11.1. and 11.2. containing simplified provisions applicable to the 05 series of amendments with dates to be determined (1 September 20xx),
• Add Annexes 10 and 11 containing summary tables of lamp positioning and geometric visibility angles.

Proposal to amend UN R74:

• Simplify definitions by referring to UN Regulation No. 48,
• Replace vehicle type references with vehicles of category L₁,
• Use hyphens in “type-approved” and “direction-indicator lamp”,
• Add provisions for electric vehicle inclusion,
• Consolidate general and individual lamp specifications,
• Reorganize geometric visibility requirements into paragraphs 5.5 and 5.6,
• Add para. 5.22 regarding lamp operation requirements,
• Create summary tables in Annexes 6 and 7 for lamp positioning and geometric visibility angles,
• Revise approval marks in Annex 2,
• Reserve Annex 3,
• Establish transitional provisions for the 04 series with dates to be determined (1 September [20xx]).

Document WP.29/2012/76 is a proposal for Supplement 14 to the 01 series of amendments to UN R53 to introduce bend lighting for motorcycles. IMMA proposes to keep the bank angle threshold for activation at five degrees rather than the proposed three degrees.

Correction to the proposal aligning the provisions of UN Global Technical Regulation (GTR) No. 12 with those of UN Regulation No. 60.

In response to discussions over the application of Revision 3 to the 1958 Agreement concerning extensions of approvals granted prior to Revision 3, IMMA presents an example from UN R50 where application of Revision 3 presents concerns.

OICA and IMMA comments on the new procedures of Revision 3 to the 1958 Agreement concerning the retroactive application of Supplements to extensions of type approvals.