| Proposal for Supplement 15 to the 01 series of amendments to Regulation No. 67 |
| Reference Number: GRSG-112-19 |
|
Proposal to allow for the approval of systems using non-seamless double and single wall tubes subject to testing for high pressure and high resistance to pressure pulses. The proposal would also add general test requirements for LPG fuel lines and couplings based on ISO Standard 15500 for compressed natural gas equipment. |
| Submitted by: LG Europe |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 21 Apr 17 |
| Document status: Superseded |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| AEGPL comments on Poland's Supplement proposal for UN R67 (GRSG/2017/10) |
| Reference Number: GRSG-112-20 |
|
In GRSG/2017/10, Poland proposes requirements for the LPG tank and its accessories. AEGPL notes that UN R67 requires a specific bonfire test of the container equipped with specific configurations of accessories which includes markings to indicate the extension number of each accessory corresponding to each configuration. In order to ensure that the user knows whether an accessory can be fitted with a specific container, AEGPL proposes to require marking the extension number on the accessories relevant to the bonfire test (multivalve, pressure relief valve and pressure relief device) in order to prevent/forbid the fitting of any accessory not approved for use in each container configuration. This alternative proposal to that in GRSG/2017/10 would imply a new marking requirement for accessories, but would avoid the proliferation of accessory type-approval numbers and increase in paperwork. |
| Submitted by: LG Europe |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 21 Apr 17 |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| Proposal for amendments to the 01 series of amendments to Regulation No. 67 |
| Reference Number: GRSG-112-21 |
|
Proposal to introduce tolerances for dish, bayonet, and acme filling units in order to reduce risks of misuse in connecting these filling units with nozzles. |
| Submitted by: LG Europe |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 21 Apr 17 |
| Document status: Superseded |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| Proposal for amendments to Regulation No. 67 |
| Reference Number: GRSG-112-22 |
|
Proposal to introduce a maximum service life requirement of 15 years and for the location of the filling unit of the LPG tank on vehicles. |
| Submitted by: Türkye |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 21 Apr 17 |
| Document status: Superseded |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| Proposal for amendments to UN Regulation No. 67 |
| Reference Number: GRSG-112-31 |
|
Proposal to require that components connecting the pressure relief device with the gaseous phase be made of metal. |
| Submitted by: Germany |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 24 Apr 17 |
| Document status: Superseded |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| Proposal for amendments to UN Regulation No. 67 |
| Reference Number: GRSG-112-32 |
|
Proposal to establish a requirement for easy access to the LPG container installation in order to permit visual (periodical) inspection as a means to reduce the safety risks, such as refueling explosion, due to corrosion. |
| Submitted by: Germany |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 24 Apr 17 |
| Document status: Superseded |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
| The importance of the type definition in the UN Regulation No. 67 type-approval process |
| Reference Number: GRSG-112-37 |
|
Presentation supporting GRSG/2017/10 to clarify the definitions of LPG container accessories to facilitate coordination between the separate, independent approvals required for the LPG container and for its accessories. |
| Submitted by: Poland |
| Meeting Sessions: 112th GRSG session (24-28 Apr 2017) |
| Document date: 26 Apr 17 |
| Relevant to: UN Regulation No. 67 | Liquefied Petroleum Gas Equipment |
| Click here to view the full document file |
No matching documents.
Working Party on General Safety (cf French: Groupe de Rapporteurs sur la Sécurité Générale)