Listing documents from 2016
Documents also available for 2020 2019 2018 2017 More than 4 years ago
Show all 481 documents (This may take some time)
Date Reference Description Status
07 Jan 2016 SLR-08-02
Structure of the new lighting device regulations pursuant to the 7th SLR informal group session
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Retro-reflecting Devices Retro-reflecting Devices Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers Illumination of rear-registration plates of motor vehicles and their trailers Rear Plate Lighting Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles)and their trailers Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Advance Warning Triangles Warning Triangles Uniform Provisions Concerning the Approval of Advance-Warning Triangles Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Position and Indicator Lamps for Motorcycles Motorcycle Lamps Uniform Provisions Concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration Plate Illuminating Devices for Vehicles of Category L Rear Marking Plates for Slow-moving Vehicles Slow Vehicle Marking Plates Uniform Provisions Concerning the Approval of Rear Marking Plates for Slow-moving Vehicles (by Construction) and their Trailers Rear Marking Plates for Heavy and Long Vehicles Long Vehicle Marking Plates Uniform Provisions Concerning the Approval of Rear Marking Plates for Heavy and Long Vehicles Motorcycle and Moped Tires Motorcycle Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Motor Cycles and Mopeds Daytime Running Lamps Daytime Running Lamps Uniform Provisions Concerning the Approval of Daytime Running Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Retro-reflective Markings Retro-reflective Markings Uniform Provisions Concerning the Approval of Retro-reflective Markings for Vehicles of Category M, N and O Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Updated paper on the grouping of lighting regulations under one of three new regulations as follows: Light Signaling Devices incorporating Regulations 4, 6, 7, 23, 38, 50, 77, 87, and 91 Forward Lighting Devices incorporating Regulations 19, 98, 112, [ 113 ], 119, and 123 Retro-Reflective Devices incorporating Regulations 3, 27, 69, 70, and 104
19 Jan 2016 GRE/2016/9
Proposal of supplements to the 04, 05, and 06 series of amendments to UN Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal for Supplement 17 to the 04 series of amendments, Supplement 10 to the 05 series of amendments and Supplement 8 to the 06 series of amendments to Regulation No. 48. The proposal seeks to clarify paragraph 6.21.1.2.4. with regard to the application of conspicuity markings on bodywork made of flexible material.
19 Jan 2016 GRE/2016/10
Proposal for amendments to the 03, 04, 05 and 06 series of amendments to Regulation No. 48.
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices International Whole Vehicle Type Approval System (IWVTA) International Whole Vehicle Type Approval UN Regulation No. 0 on uniform provisions concerning the International Whole Vehicle Type Approval Proposal to further refine the transitional provisions of UN R48. In 2014, the transitional provisions of UN R48 were changed in order to avoid having more than one series of amendments in force at the same time (via Supplement 3 to the 06 series of amendments). This change allows earlier series of amendments to be "frozen" and used under the International Whole Vehicle Type Approval system (IWVTA) as "versions" of UN R48. However, the possibility for the partial application of a series of amendments resulting from the installation of new equipment on a vehicle approved to an earlier series has been raised within the IWVTA. This proposal refines the transitional provisions in order to enable partial application of a series through an extension of the existing approval rather by requiring a new approval. At the same time, the proposal aims to ensure that the safety objectives of UN R48 are met.
19 Jan 2016 GRE/2016/11
Proposal for Supplement 26 to the 01 series of amendments to Regulation No. 6 and Supplement 24 to the 02 series of amendments to Regulation No. 7
Working Party Working Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Proposal to align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of "single lamps", "lamps marked D" and "interdependent lamps".
19 Jan 2016 GRE/2016/15
Proposal for Supplement 19 to the 01 series of Regulation No. 53
Working Party Working Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to remove restrictions that impede the use of bend lighting on motorcycles. UN R53 currently prohibits the use of additional lighting units when the driving beam is in use. This requirement unnecessarily restricts the use of ALU to improve road illumination at night when the motorcycle is banking through a turn.
20 Feb 2016 SLR-09-03
Skeletons of the new regulations under the simplified lighting regime
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Compressed file package with three documents outlining the structure for the new simplified lighting regime and for the new regulations on light signaling and road illuminating devices.
21 Jan 2016 GRE/2016/6
Proposal for Supplement 45 to the 03 series of amendments to Regulation No. 37
Working Party Working Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Proposal to clarify the specifications of filament lamp category H19.
21 Jan 2016 GRE/2016/13
Proposal for collective amendments to Regulations No. 7, 23, 38, 77, 91, and 119
Working Party Working Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Proposal to refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. In the case of failure of any one light source in a single lamp containing more than one light source, either the light intensity must comply with the minimum intensity required in the table of standard light distribution in space or, for lamps used in systems where a tell-tale indicates the failure of any one of the light sources, the light intensity in the axis of reference must be at least 50 per cent of the minimum intensity required.
21 Jan 2016 GRE/2016/14
Proposal for a collective amendment to Regulations Nos. 19, 45, 98, 112, 113 and 123
Working Party Working Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Headlamp Cleaners Headlamp Cleaners Uniform Provisions Concerning the Approval of Headlamp Cleaners and of Power-driven Vehicles with regard to Headlamp Cleaners Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Proposal to amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45 where the specified quantity of "2 ± 1 parts by weight" of surfactant results in invalid testing. The correct specification should be "2 ± 1 drops" of surfactant. While GTB notes that the specification should eventually be incorporated differently under the pending simplification of lighting regulations, the organization strongly urges amending UN R45 as quickly as possible.
06 Apr 2016 GRE-75-15
Report of the GTB Task Force on Conformity of Production
Working Party Informal
02 Jun 2016 DETA-25-09
Application of the DETA Universal Identifier under the proposed simplification of lighting regulations
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined.
09 Aug 2016 GRE/2016/26
Proposal for Supplement 13 to the original series of amendments to Regulation No. 99
Working Party Working Gas-discharge Light Sources Gas-discharge Light Sources Uniform Provisions Concerning the Approval of Gas-discharge Light Sources for use in Approved Gas-discharge Lamp Units of Power-driven Vehicles Proposal to add a new paragraph 3.6.2.4. to UN R99 in order to clarify how the run-up of dual-level high-intensity discharge (HID) light sources, as e.g. D9S, should be tested during type approval. In addition, the proposal renumbers the part of 3.6.2.2. that applies to gas-discharge light sources containing black stripes as 3.6.2.3. to make the distinction with gas-discharge light sources not containing black stripes.
09 Aug 2016 GRE/2016/24
Proposal for Supplement 11 to the 05 series of amendments and Supplement 9 to the 06 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to correct the terminology in paragraph 5.7.2.1. for consistency across all requirements and to clarify the language in paragraphs 6.2.9., 6.3.6.1.2.1. and 6.3.6.1.2.2. to promote the correct application of the 2,000-lumen limit.
09 Aug 2016 GRE/2016/21
Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6
Working Party Working Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Paragraph 6.5.3. of UN R48 prescribes the use of specific categories of front direction indicators in relation to their distance from the dipped beam headlamp or front fog lamp. However, the text allows categories 1a and 1b to be used at any distance greater than the minimum prescribed for each of them. The present text of UN R6, Annex 1, however, only allows a specific category to be used in the specific range of distance prescribed. Therefore, this proposal deletes the specific requirements in UN R6 and introduces a direct reference to the requirements in UN R48. This proposal effectively eliminates the need for a lower maximum value for the Category 1 front direction indicator than that of the other categories. Therefore, it is proposed to align the maximum luminous intensity value of Category 1 to that of Categories 1a and 1b.
09 Aug 2016 GRE/2016/22
Proposal for Supplement 26 to the 02 series of amendments to Regulation No. 7
Working Party Working Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Proposal to align the text of paragraph 6.1.6. with the definition of “single lamp” introduced by document ECE/TRANS/WP.29/GRE/2014/6 (Proposal for Supplement 14 to the 04 Series of amendments, Supplement 7 to the 05 Series of amendments and Supplement 5 to the 06 Series of amendments of Regulation No. 48). The reference to paragraph 4.2.2.6. in the header of the table in paragraph 6.1. is also corrected.
09 Aug 2016 GRE/2016/23
Proposal for Supplement 26 to the 02 series of amendments to Regulation No. 7
Working Party Working Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Supplement 11 to the 02 series of amendments to Regulation No. 7 introduced a new paragraph "0. SCOPE" that included vehicles of category “L”. This proposal corrects the title of the Regulation, removing the exception of motor cycles.
10 Aug 2016 GRE/2016/27
Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 119
Working Party Working Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles The content of paragraph 7.5. was moved to Annex 3, paragraph 3.3. by supplement 4 to the 01 series of Regulation No. 119. The original content of paragraph 7.5. should have been deleted as part of the amendment, but this was overlooked. This amendment is necessary to remove the current conflict between the content of Annex 3, paragraph 3.3. and paragraph 7.5 in the main text.
11 Aug 2016 GRE/2016/29
Proposal for Supplement 8 to the 01 series of amendments to Regulation No. 123
Working Party Working Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles When the 01 series of amendments to Regulation No. 123 was introduced to convert the photometric requirements from illuminance E (lux) to luminous intensities I (cd), some changes from E<sub>max</sub> to I<sub>max</sub> were overlooked. This amendment introduces the necessary corrections. The proposal also amends Annex 3, Table 2 to allow sub-classes of Class C to lower the cut-off position to give the opportunity to adapt to foggy weather conditions and thus avoid glare and increase safety.
11 Aug 2016 GRE/2016/30
Proposal for a collective amendment to Regulations Nos. 4, 6, 7, 23, 38, 50, 77, 87, 91 and 119
Working Party Working Illumination of rear-registration plates of motor vehicles and their trailers Rear Plate Lighting Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles)and their trailers Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Position and Indicator Lamps for Motorcycles Motorcycle Lamps Uniform Provisions Concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration Plate Illuminating Devices for Vehicles of Category L Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Daytime Running Lamps Daytime Running Lamps Uniform Provisions Concerning the Approval of Daytime Running Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles This proposal removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). From an electronic point of view, the information of the wattage brings no benefit and is confusing if the same module is used in different systems and at different wattages.
11 Aug 2016 GRE/2016/32
Proposal for a collective amendment to Regulations Nos. 19, 98, 112, 113 and 123
Working Party Working Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles This collective amendment on the stability of photometric performance during the heat test, with particular reference to the movement of the cut-off line, clarifies the test cycle and also aligns the requirements of Regulations Nos. 19, 98, 112, 113 and 123. In addition to resolving problems of interpretation presented by the current text, this collective amendment will assist the Informal Working Group "Simplification of Lighting and Light-Signalling Regulations" in drafting the new simplified Regulations which is underway.
12 Aug 2016 GRE/2016/25
Proposal for a collective amendment to Regulations Nos. 98, 112 and 123
Working Party Working Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Supplement 3 to the 01 series of amendments to UN R 98, 112, and 123 deleted the measurement point HV from the photometric requirement table. The HV measurement point, however, remains a requirement for checking photometric stability. This proposal removes the HV measurement point from the photometric stability requirements for the passing beam. The HV measurement point remains a valid for the driving beam.
16 Aug 2016 GRE/2016/28
Proposal for Supplement 8 to the 01 series of amendments to Regulation No. 123
Working Party Working Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles During its 69th session, GRE adopted proposals to update the Conformity of Production (CoP) procedures for lighting and light-signalling devices, but decided to await the work of a GTB task force on the simplification of CoP provisions for AFS before addressing UN R123. This proposal amends the CoP procedures in line with those agreed for UN R112 (document GRE/2013/37) to create simplified photometric CoP tables for each class (C, V, W, E, R, RADB) with its applicable 0/20/30 per cent limits. Furthermore, the task force clarified which tests are necessary for CoP testing and which are necessary only for type approval testing. The methods and requirements for the "initial" type approval remained unchanged. An overview of the main AFS characteristics can be found in documents GRE-48-28 and GRE-48-30.
12 Aug 2016 GRE/2016/31
Proposal for a collective amendment to Regulations Nos. 7, 23, 38, 48, 77, 91 and 119
Working Party Working Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles The current requirements on light source failure in lamps equipped with multiple light sources differ across UN Regulations. GTB submitted and then withdrew a proposal to align these requirements (GRE/2016/13). This updated proposal improves upon the text of the previous proposal to refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. In the case of failure of any one light source in a single lamp containing more than one light source, either the light intensity must comply with the minimum intensity required in the table of standard light distribution in space or, for lamps used in systems where a tell-tale indicates the failure of any one of the light sources, the light intensity in the axis of reference must be at least 50 per cent of the minimum intensity required.
12 Aug 2016 GRE/2016/34
Proposal for a collective amendment to Regulations Nos. 19, 98, 112, 113 and 123
Working Party Working Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles This collective amendment extends the usage of LED light sources of UN R128 to front lighting Regulations Nos. 19, 98, 112, 113 and 123 (as presented in the previous session document GRE-75-14). The proposal would allow for the use of regulated replaceable LED light sources according to Regulation No. 128 in all applications where the use of LED modules is already permitted.
29 Aug 2016 SLR-12-02
Proposal for a draft text on light-signalling devices incorporating the Unique Identifier
Informal Group Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Database for the Exchange of Type Approval Documentation DETA n.a. The DETA informal group has developed a Unique Identifier for simplified type-approval markings. This document aims to apply the Unique Identifier to the new draft regulation on light-signalling devices.
06 Oct 2016 SLR-13-04
Example of amended UN Regulation No. 6-Rev.6 to show introduction of Universal Identifier (UI)
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers
24 Oct 2016 GRE-76-04/Rev.1
Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 112
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Proposal to update document GRE/2016/34. At the 73rd GRE session, France proposed to delete a design restrictive requirement (GRE/2015/22 and GRE-73-26). This proposal received comments from Germany and the Netherlands. Poland suggested a different approach on this issue (GRE-73-21). The Chair invited France, Germany, Netherlands, Poland, CLEPA and IEC to prepare a revised proposal for the next session. Based upon the approach proposed in GRE/2015/22 and GRE-73-26, GTB has investigated the specification of minimum levels of flux projected in critical zones of the passing beam distribution. This approach offers a technology-neutral performance based requirement. The result of the GTB study is to propose minimum projected flux requirements in two zones: a) 15°D-1°U/30°L-30°R to ensure overall adequate illumination of the road and b) 3.5°D-1°U/30°L-30°R to ensure sufficient range.
17 Oct 2016 GRE-76-07
Correction to document GRE/2016/31
Working Party Informal Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Correction to the proposal for a collective amendment to Regulations Nos. 7, 23, 38, 48, 77, 91 and 119. Since the cornering lamp projects a beam to the left and right of the reference axis, it is not relevant to check the photometric values in the reference axis (HV). Therefore, the test point at 2.5°D, 45°L or R shall be used.
24 Oct 2016 GRE-76-13
Upcoming changes to Regulation No. 128 related to LED Light Sources for Forward Lighting Applications
Working Party Informal Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles The collective amendment presented in GRE/2016/34 extends the usage of LED light sources of UN R128 to front lighting Regulations Nos. 19, 98, 112, 113 and 123. The introduction of LED light source categories under UN R128 for forward lighting applications (front fog, low beam, high beam, AFS) is planned for 2017. This presentation explains the plans, timeline, and dependencies GTB proposes to address through the collective amendment, especially within the context of the simplification of lighting regulations program.
26 Oct 2016 GRE-76-14/Rev.1
Editorial improvement to ECE/TRANS/GRE/2016/29
Working Party Informal Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Editorial improvements to the proposal for Supplement 8 to the 01 series of amendments to UN R123.
26 Oct 2016 GRE-76-22/Rev.1
Revision of document ECE/TRANS/WP.29/GRE/2016/31
Working Party Informal Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Revised proposal (removing the section on UN R48 and incorporating corrections noted in document GRE-76-07) to refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. In the case of failure of any one light source in a single lamp containing more than one light source, either the light intensity must comply with the minimum intensity required in the table of standard light distribution in space or, for lamps used in systems where a tell-tale indicates the failure of any one of the light sources, the light intensity in the axis of reference must be at least 50 per cent of the minimum intensity required. This collective amendment addresses Regulations Nos. 7, 23, 38, 77, 91 and 119. The proposals concerning UN R48 will be resubmitted for consideration during the 77th GRE session.
02 Nov 2016 GRE-76-24/Rev.1
Simplification of Lighting and Light-Signalling Regulations: application of the Unique Identifier (UI)
Working Party Informal Database for the Exchange of Type Approval Documentation DETA n.a. Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Simplification of Lighting Regulations SLR To be determined. Retro-reflective Devices and Markings (RRD) Retro-reflective Devices (RRD)
28 Oct 2016 GRE-76-25
Night demonstration: H4 Halogen Reflector headlamp versus representative LED headlamp
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules
31 Oct 2016 DETA-27-03
Proposal for incorporation of UI concept in UN R6
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers GTB proposal for incorporation of the DETA Universal Identifier approval mark into the UN Regulation on direction indicators.