1 2 3 4 5 6 7 8 9 10
Document Title UN R166: Proposal for Supplement 1
Reference Number GRSG-127-19
Date
11 Apr 2024
Summary Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure pursuant to updates and transfer of related provisions from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1).
Source(s) Netherlands
Rulemaking Area(s) UN R166 MOIS (M1/N1)
Regulatory Impact
Original text | Supplement 1
Proposal Status Superseded
Meeting(s)
Related Documents
GRSG/2024/25 UN R166: Proposal for Supplement 1
Downloads
UNECE server .pdf format .docx format
GAR server
Excerpts from session reports related to this document
GRSG | Session 127 | 15-19 Apr 2024

17. As per paragraphs 10, 12 and 13, the expert from the Netherlands introduced ECE/TRANS/WP.29/GRSG/2024/25, amended by GRSG-127-19. GRSG adopted ECE/TRANS/WP.29/GRSG/2024/25 as amended below. The secretariat was requested to submit the proposal as Supplement 1 to the original version of UN Regulation No. 166 and as part of (see paragraph 16 above) the draft 01 series of amendments to the UN Regulation for consideration and vote at the November 2024 sessions of WP.29 and AC.1.

Contents, Chapter 20, amend to read:
“20. Penalties for non-conformity of protection production…………………………………………..”
Header, Chapter 20, amend to read:
“20. Penalties for Non-Conformity of Production”

17. As per paragraphs 10, 12 and 13, the expert from the Netherlands introduced ECE/TRANS/WP.29/GRSG/2024/25, amended by GRSG-127-19. GRSG adopted ECE/TRANS/WP.29/GRSG/2024/25 as amended below. The secretariat was requested to submit the proposal as Supplement 1 to the original version of UN Regulation No. 166 and as part of (see paragraph 16 above) the draft 01 series of amendments to the UN Regulation for consideration and vote at the November 2024 sessions of WP.29 and AC.1.

Contents, Chapter 20, amend to read:
“20. Penalties for non-conformity of protection production…………………………………………..”
Header, Chapter 20, amend to read:
“20. Penalties for Non-Conformity of Production”