1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
---|---|---|---|---|---|---|---|---|---|
Document Title | GTR 6: Proposal for Amendment 4 | ||||||||
Reference Number | GRSG/2024/20 | ||||||||
Date |
30 Jan 2024
|
||||||||
Summary | Proposal to update the references to the three-dimensional H-point (3-D "H"-point) measurement and calibration procedure as moved from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1). | ||||||||
Source(s) | Netherlands | ||||||||
Rulemaking Area(s) | GTR No. 6 Safety Glazing, MR 1: Test devices, and RE3: Vehicle Construction | ||||||||
Proposal Status | Superseded | ||||||||
Meeting(s) | |||||||||
Related Documents | |||||||||
GRSG-126-20 | MR1: Proposal for Amendment 5 | ||||||||
WP.29/2024/161 | GTR 6: Proposal for Amendment 4 (adopted) | ||||||||
Downloads | |||||||||
UNECE server | .pdf format | .docx format | |||||||
GAR server | |||||||||
Excerpts from session reports related to this document | |||||||||
GRSG | Session 127 | 15-19 Apr 2024 |
8. GRSG noted that the Executive Committee of the 1998 Agreement (AC.3) at its March 2024 session had adopted the authorization (ECE/TRANS/WP.29/2024/32) to develop amendments to UN GTRs Nos. 6, 7 (Head Restraints) and 14 (Pole side impact) which would allow the transfer of the reference, drawings and specification on the three-dimensional H- (3-D H-) point machine and calibration procedure from the UN GTRs to Mutual Resolution No. 1 (M.R.1). The expert from the Netherlands, which sponsors the amendment, introduced ECE/TRANS/WP.29/GRSG/2024/20 amending the UN GTR. Finally GRSG recommended ECE/TRANS/WP.29/GRSG/2024/20, not amended, as Amendment 4 to UN Regulation No. 6 to the November 2024 session of AC.3. |
||||||||