1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
---|---|---|---|---|---|---|---|---|---|
Document Title | PMP: Proposal for sub-23nm particles measurement procedure for HD engines | ||||||||
Reference Number | GRPE-82-29/Rev.1 | ||||||||
Date |
13 Jan 2021
|
||||||||
Summary | This proposal from IWG PMP is based on the PN measurement procedure laid down in UN R49 but should be considered exclusively a technical working document. The purpose of this document is only to discuss within the PMP group the changes/additions needed to modify the PN cut-off size from 23 to approximately 10 nm and to include raw exhaust sampling | ||||||||
Rulemaking Area(s) | PMP | ||||||||
Proposal Status | Informal GR review | ||||||||
Meeting(s) | |||||||||
Related Documents | |||||||||
PMP-52.5-05 | Particle Measurement procedure for HD Engines | ||||||||
Downloads | |||||||||
UNECE server | .pdf format | .docx format | |||||||
Excerpts from session reports related to this document | |||||||||
GRPE | Session 82 | 12-15 Jan 2021 |
38. The representative from the EC, Chair of the IWG on PMP, introduced GRPE-82-29-Rev.1 and GRPE-82-30, presenting a draft proposal for sub-23nm measurement procedure for heavy duty engines in the laboratory. He mentioned the intention of the IWG on PMP was to finalize the procedure and submit a document that could be used as a reference document for future use in regulatory texts. After considering different document types during the session, he declared this document would be proposed as a draft consolidated resolution in forthcoming sessions of GRPE. |
||||||||