GAR | GRSG-118-04

Document Title: Draft FRAV progress report to GRVA

Document Reference Number: FRAV-10-09

Meeting Session: 10th FRAV session (27 Jan)

Document date: 26 Jan 21 (Posted 26 Jan 21)

This document concerns WP.29 Regulatory Project | Automated Driving Systems.

Document Title: VMAD SG1: Proposal for functional scenarios

Document Reference Number: VMAD-SG1-11-02

Submitted by: China

Meeting Session: 11th VMAD-SG1 session (10 Dec 2020)

Document date: 10 Dec 20 (Posted 26 Jan 21)

This document concerns WP.29 Regulatory Project | Automated Driving Systems.

Document Title: VMAD Scenario's Subgroup status presentation for its 11th session

Document Reference Number: VMAD-SG1-11-01

Meeting Session: 11th VMAD-SG1 session (10 Dec 2020)

Document date: 10 Dec 20 (Posted 26 Jan 21)

This document concerns WP.29 Regulatory Project | Automated Driving Systems.

Document Title: Summary of the 12th VMAD Scenarios Subgroup session

Document Reference Number: VMAD-SG1-12-06

Meeting Session: 12th VMAD-SG1 session (13 Jan)

Document date: 26 Jan 21 (Posted 26 Jan 21)

This document concerns WP.29 Regulatory Project | Automated Driving Systems.

Document Title: Defined method for triggering REESS thermal runaway

Document Reference Number: EVS-20-E1TP-401

Submitted by: NRC and TC

Meeting Session: 20th EVS session (13-15 Jan)

Document date: 26 Jan 21 (Posted 26 Jan 21)

This document concerns GTR No. 20 | Electric Vehicle Safety.
This submission is related to the following document(s):

EVS-20-E1TP-0400 | Thermal propagation testing of electric vehicles Available formats: pdf

Document Title: Report of the 41st EPPR informal group session

Document Reference Number: EPPR-41-06

Meeting Session: 41st EPPR session (8 Jan)

Document date: 25 Jan 21 (Posted 26 Jan 21)

This document concerns GTR No. 2 | Motorcycle Emissions and Fuel Consumption, WP.29 Regulatory Project | Durability of L-category Vehicle Pollution Control Devices, and WP.29 Regulatory Project | Measurement of Motorcycle Max Power.

Document Title: Example of UN R155 approval extension after July 2024

Document Reference Number: TFCS-20-11

Submitted by: CLEPA and OICA

Meeting Session: 20th TFCS session (26-27 Jan)

Document date: 25 Jan 21 (Posted 25 Jan 21)

This document concerns UN Regulation No. 155 | Cyber Security and Cyber Security Management.

Document Title: Comments on Cyber Security Management System and Software Update Management System requirements

Document Reference Number: TFCS-20-10

Submitted by: Blackberry

Meeting Session: 20th TFCS session (26-27 Jan)

Document date: 25 Jan 21 (Posted 25 Jan 21)

This document concerns UN Regulation No. 155 | Cyber Security and Cyber Security Management and UN Regulation No. 156 | Software Update Processes and Management Systems.

Regulation:	UN Regulation No. 151 \| Blind-spot information systems (BSIS)
Document:	Revision 1 \| Amendment 1
Corresponds to:	00 series of amendments \| Supplement 1 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/18 Proposal to clarify test procedures allowing non-random selection of parameter combinations and provide for protrusion requirements for Blind Spot Information Systems (BSIS) external elements. Document WP.29-180-05 Proposal to correct values presented in document WP.29/2020/18 and clarification of “first point of information” application in assessment of BSIS.

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 3
Corresponds to:	02 series of amendments \| Supplement 11 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/6 Proposal for an amendment to complement the content of working document GRVA/2018/5. The proposal includes amendments to: The Standard Reference Test Tyre (SRTT) denominations Remove the discrimination between the two Class C3 tyres Clarify that there are no C3 tyres in the scope of this UN Regulation “not marked with speed symbol” Align Annex 6 with the most recent amendments made to standard ISO 28580 Define “standard deviation” as appropriate in the text Clarify that, in the cases of C2 and C3 tyres, the “Reference (test) pressure” and the value “Pr” correspond to the indication of the inflation pressure which is always marked on the sidewall Use “repeatable” instead of references to “reproducibility” Update test report forms Include the date on which the new proposed supplement of UN Regulation No. 117 will apply Improve the description of the evaluation of the rolling sound emission test Correct the figure in Annex 2, Appendix 2, and Update cross references pursuant to paragraph renumbering.

Regulation:	UN Regulation No. 152 \| Automatic Emergency Braking for M1/N1 vehicles
Document:	Amendment 2
Corresponds to:	01 series of amendments (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/10 Proposal to introduce new and enhanced requirements for the car-to-pedestrian test scenario. These requirements would be phased in from May 2024.

Regulation:	UN Regulation No. 152 \| Automatic Emergency Braking for M1/N1 vehicles
Document:	Amendment 1
Corresponds to:	00 series of amendments \| Supplement 1 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/9 Proposal to improve and clarify the text of the Regulation.

Regulation:	UN Regulation No. 128 \| Light-Emitting Diode Light Sources
Document:	Amendment 10
Corresponds to:	00 series of amendments \| Supplement 10 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/31 Proposal to insert a minimum luminance gradient as an alternative criteria. The current text requires a certain “asymmetry” of the Light Emitting Area (LEA) in order to ensure a “minimum worst-case gradient”; however, this requirement has been deemed too design-restrictive.

Regulation:	UN Regulation No. 150 \| Retro-reflective Devices and Markings (RRD)
Document:	Amendment 2
Corresponds to:	00 series of amendments \| Supplement 2 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/34 Proposal to correct a paragraph reference (‘3.3.2.2’ in place of ‘3.2.3.2’) and to insert a provision from UN R3 (para. 4.1.2.) unintentionally omitted from the original text.

Regulation:	UN Regulation No. 149 \| Road Illumination Devices (RID)
Document:	Amendment 2
Corresponds to:	00 series of amendments \| Supplement 2 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/33 Proposal to reintroduce the run-up provisions for high-intensity discharge (HID) headlamps that were unintentionally omitted from the original text of UN R149.

Regulation:	UN Regulation No. 148 \| Light-Signalling Devices (LSD)
Document:	Amendment 2
Corresponds to:	00 series of amendments \| Supplement 2 (Entered into force on 25 Sep 2020)
Based on:	Document WP.29/2020/32 Proposal to differentiate light source modules in cases where a signalling device contains more than one different module, to restore the sequential activation of direction indicators of categories 11, 11a, 11b, 11c and 12, which were included in UN Regulation No. 50 but omitted when UN R148 was developed during SLR Stage 1, to delete a footnote indicator, and to delete characters from a figure on the standard light distribution of devices.

UN R118: Influence of adhesive agents

Download in .pdf format Download in .docx format

Proposal to clarify that adhesive agents should not exacerbate the burning behavior of materials or components. The manufacturer should list the adhesives used in construction.

Reference Number: GRSG-118-04

Regarding:

UN R118 Material Burning Behavior

Date: 3 July 2020

Meeting(s):

GRSG-118

Proposal Status: Superseded