Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.

Proposal to define “small glazing” and to exempt such small glazing from headform testing.

Proposal to clarify the testing method for resistance to high temperature in order to address issues raised with testing at high altitudes and to clarify the requirements of Annex 21 (provisions on the installation of safety glazing on vehicles) based on recommendations from the Informal Group on Plastic Glazing (IGPG).

Proposal to establish an informal expert group with a mandate for the exchange of information and experiences concerning regulations, policy measures, and standardization efforts related to the chemical compounds used in vehicle interiors and the health of vehicle occupants. If warranted, the group would develop recommendations/guidelines for inclusion as a new annex to the Consolidated Resolution on the Construction of Vehicles (RE3) and the 1998 Agreement’s Special Resolution No. 1 (SR1).

Pursuant to its defect investigations concerning the shattering of certain panoramic sunroofs, Korea proposes the establishment of an informal working group to prepare amendments to UN Regulation No. 43 and GTR No. 6 to specify test methods for evaluating panoramic sunroof glazing.

The main objective of this proposal is to develop an amendment to UN GTR No. 6 on Safety Glazing concerning clarification of the methods (e.g. 227g ball drop test), etc. for testing and evaluating the mechanical strength of toughened glass so that the safety of a panoramic sunroof is assured.

Note prepared by the WP.29 secretariat to support discussion of a request for guidance on how to address within the World Forum the various advanced driver assistance and automated vehicle systems.