| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS application matrix |
| Reference Number: CMS II-03-02 |
|
Review of ISO 16505 and applicability to type approval under UN R46 as amended for camera-monitor systems (Annex 12). |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| Testing and assessment of point light sources |
| Reference Number: CMS II-03-04 |
| Submitted by: TÜV Rheinland |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 21 May 14 |
|
Relevant to
|
| UN R46 Annex 12: Monitor Overlays |
| Reference Number: CMS II-03-11 |
|
Presentation reviewing ISO 16505 treatment of overlays, comparison of UN R46 Annex 12 current proposals with ISO 16505, and a new OICA proposal. |
| Submitted by: OICA |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
|
Relevant to
|
| Test procedure for pixel blemish measurement |
| Reference Number: CMS II-03-08 |
|
Proposal for pixel fault (white and dark blemish) testing of monitors in camera-monitor systems. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Pixel fault test procedures to determine worst case probabilities |
| Reference Number: CMS II-03-09 |
|
Explanation of pixel fault testing. Pixel faults arise erratically across production and cannot be directly quantified by testing product samples. Moreover, pixel faults are a problem only when they affect visual perceptions of the driver. Therefore, the testing needs to determine the probability for a “disturbing” disruption of the image that could significantly interfere with a driver’s perception of the image. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 03 Jun 14 |
|
Relevant to
|
| Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision |
| Reference Number: CMS II-03-10 |
|
Working draft of Annex 12 on functional safety requirements under development by the Informal Group on Camera-Monitor Systems for introduction into UN R46 to enable the replacement of rear-view mirrors with CMS devices. |
| Meeting Sessions: 3rd CMS II session (5-6 Jun 2014) |
| Document date: 04 Jun 14 |
| Document status: Superseded |
|
Relevant to
|
| View full document file for more information |
| CMS II-03-02 | CMS application matrix | |
| CMS II-03-04 | Testing and assessment of point light sources | |
| CMS II-03-08 | Test procedure for pixel blemish measurement | |
| CMS II-03-09 | Pixel fault test procedures to determine worst case probabilities | |
| CMS II-03-10 | Annex 12: Special requirements to be applied to the safety aspects of camera monitor systems for indirect vision | |
| CMS II-03-11 | UN R46 Annex 12: Monitor Overlays |