No objections to the proposals which are passed for consideration to adopt during the AC.1 session.
55. Agenda item 4.6.5, Regulation No. 127, ECE/TRANS/WP.29/2014/38, insert the following amendments:
Paragraphs 11.1. to 11.4., amend to read:
"11.1. | As from the official date …… by the 01 series of amendments. |
11.2. | As from 1 September 2017, Contracting Parties applying …… the 01 series of amendments. |
11.3 | Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing vehicle types which have been granted according to the preceding series of amendments to this Regulation. |
11.4 | Contracting Parties applying this Regulation shall continue to accept type approvals to the preceding series of amendments to the Regulation." |
Annex 4, paragraphs 1.1. and 1.4., square brackets shall be removed.
Annex 5, paragraph 3.2.1., amend to read:
“3.2.1. | The velocity of the headform impactor shall be measured at some pointduring the free flight before impact,in accordance with the method specified in ISO 3784:1976.” |
Annex 5, Figure 5, amend to read:
“Figure 5
Example of marking of HIC1000 zone and HIC1700 zone
See document WP.29/2014/38 for the drawing accompanying the revised title.
Annex 6, paragraph 2.2.4., amend to read:
“2.2.4. | The relative humidity and temperature of the certification area shall be measured at the time of certification, and recorded in the certification report.” |
Annex 6, Figure 5, the title, amend to read:
“Figure 5
Flexible lower legform impactor: Test set-up for the knee joint in the static certification test (see paragraph 1.2.5. of this Annex) …”
Annex 6, Figure 6, the title, amend to read:
“Figure 6
Flexible lower legform impactor: Test set-up for the dynamic lower legform impactor certification test (pendulum test, see paragraph 1.3.3.1. of this Annex) …”
Annex 6, Figure 7, the title, amend to read:
“Figure 7
Flexible lower legform impactor: Test set-up for the dynamic lower legform impactor certification test (inverse test, see paragraph 1.4.3.1. of this Annex) …”