|
Revision 3 | Amendment 2 has been prepared purely as documentation tool. The authentic and legally binding texts are . This document incorporates the following change: |
|||
| Original text | Supplement 18 (entry into force: 10 Oct 2017) | |||
|
Revision 3 | Amendment 3 has been prepared purely as documentation tool. The authentic and legally binding texts are . This document incorporates the following change: |
|||
| Original text | Supplement 19 (entry into force: 10 Feb 2018) | |||
|
Revision 3 | Amendment 4 has been prepared purely as documentation tool. The authentic and legally binding texts are . This document incorporates the following change: |
|||
| 01 series of amendments (entry into force: 15 Oct 2019) | |||
|
Revision 2 has been prepared purely as documentation tool. The authentic and legally binding texts are WP.29/2005/59, WP.29/2003/86, and WP.29/2003/20. This document incorporates the following changes: |
|||
| Original text | Supplement 7 (entry into force: 18 Jan 1998) | |||
| Original text | Supplement 8 (entry into force: 13 Jan 2000) | |||
| Original text | Supplement 9 (entry into force: 26 Aug 2002) | |||
| Original text | Supplement 10 (entry into force: 26 Feb 2004) | Adopted proposal WP.29/2003/20 | ||
|
Proposal to introduce provisions for the approval of "slightly curved registration plates”. |
|||
| Original text | Supplement 10 | Corrigendum 1 (entry into force: 4 Mar 2004) | Adopted proposal WP.29/2003/86 | ||
|
Proposal to allow the use of changeable “light source modules” instead of non-replaceable light sources (pursuant to the amendments previously agreed for UN R7). |
|||
| Original text | Supplement 11 (entry into force: 4 Jul 2006) | Adopted proposal WP.29/2005/59 | ||
|
Lamps equipped with non-replaceable light sources, e.g. LED’s, can be operated at a range of voltages. This proposal enables the proper testing and approval of such devices under a single approval number provided that the range of voltage and the rated (maximum) wattage is included in the marking of the lamp. |
|||
|
Revision 2 | Amendment 1 has been prepared purely as documentation tool. The authentic and legally binding text is WP.29/2006/50. This document incorporates the following change: |
|||
| Original text | Supplement 12 (entry into force: 2 Feb 2007) | Adopted proposal WP.29/2006/50 | ||
|
Proposal to clarify the scope of the regulation specifically to vehicles of categories M, N, O, and T. |
|||
|
Revision 2 | Amendment 3 has been prepared purely as documentation tool. The authentic and legally binding text is WP.29/2008/9. This document incorporates the following change: |
|||
| Original text | Supplement 14 (entry into force: 15 Oct 2008) | Adopted proposal WP.29/2008/9 | ||
|
Proposal to insert provisions to cover cases where several non-identical light source modules are used in a lamp. |
|||
|
Revision 2 | Amendment 4 has been prepared purely as documentation tool. The authentic and legally binding texts are WP.29/2010/5 and WP.29/2007/57. This document incorporates the following changes: |
|||
| Original text | Supplement 13 (entry into force: 11 Jul 2008) | Adopted proposal WP.29/2007/57 | ||
|
Proposal to insert references to Regulations Nos. 37 and 99 and to the International Electrotechnical Commission (IEC) Publication 60061, specifying the use of filament lamps and gas-discharge light sources. |
|||
| Original text | Supplement 15 (entry into force: 9 Dec 2010) | Adopted proposal WP.29/2010/5 | ||
|
Proposal to prohibit the use of light source modules with ECE cap–holder systems. |
|||
|
Revision 2 | Corrigendum 1 has been prepared purely as documentation tool. The authentic and legally binding text is WP.29/2007/56. This document incorporates the following change: |
|||
| Original text | Supplement 10 | Corrigendum 2 (entry into force: 14 Nov 2007) | Adopted proposal WP.29/2007/56 | ||
|
Proposal to correct the definition for different types of rear registration plate lamps. This proposal deletes the criteria " the angle of incidence of the light on the surface of the plate" in paragraph 1.3 because this item contradicts the provisions of paragraphs 2 and 7 which state "…. the manufacturer of the illuminating device shall specify one or more or a field of positions in which the device is to be fitted in relation to the space for the registration plate …. ". |
|||
|
Revision 3 has been prepared purely as documentation tool. The authentic and legally binding texts are WP.29/2012/63, WP.29/2010/5, WP.29/2008/9, WP.29/2006/50, WP.29/2007/57, and WP.29/2007/56. This document incorporates the following changes: |
|||
| Original text | Supplement 12 (entry into force: 2 Feb 2007) | Adopted proposal WP.29/2006/50 | ||
|
Proposal to clarify the scope of the regulation specifically to vehicles of categories M, N, O, and T. |
|||
| Original text | Supplement 14 (entry into force: 15 Oct 2008) | Adopted proposal WP.29/2008/9 | ||
|
Proposal to insert provisions to cover cases where several non-identical light source modules are used in a lamp. |
|||
| Original text | Supplement 10 | Corrigendum 2 (entry into force: 14 Nov 2007) | Adopted proposal WP.29/2007/56 | ||
|
Proposal to correct the definition for different types of rear registration plate lamps. This proposal deletes the criteria " the angle of incidence of the light on the surface of the plate" in paragraph 1.3 because this item contradicts the provisions of paragraphs 2 and 7 which state "…. the manufacturer of the illuminating device shall specify one or more or a field of positions in which the device is to be fitted in relation to the space for the registration plate …. ". |
|||
| Original text | Supplement 13 (entry into force: 11 Jul 2008) | Adopted proposal WP.29/2007/57 | ||
|
Proposal to insert references to Regulations Nos. 37 and 99 and to the International Electrotechnical Commission (IEC) Publication 60061, specifying the use of filament lamps and gas-discharge light sources. |
|||
| Original text | Supplement 15 (entry into force: 9 Dec 2010) | Adopted proposal WP.29/2010/5 | ||
|
Proposal to prohibit the use of light source modules with ECE cap–holder systems. |
|||
| Original text | Supplement 16 (entry into force: 15 Jul 2013) | Adopted proposal WP.29/2012/63 | ||
|
Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for replaceable light-emitting diode (LED) light sources and to correct and harmonize the provisions concerning approval markings. |
|||
|
Revision 3 | Amendment 1 has been prepared purely as documentation tool. The authentic and legally binding texts are . This document incorporates the following change: |
|||
| Original text | Supplement 17 (entry into force: 15 Jun 2015) | |||
|
Revision 3 | Corrigendum 1 has been prepared purely as documentation tool. The authentic and legally binding texts are . This document incorporates the following change: |
|||
| Revision 3 erratum (entry into force: 24 Mar 2015) | |||