5. Regulations Nos. 37, 99, 128 and RE5 (light-source specifications)
|
15. The expert from GTB proposed an amendment to Regulation No. 37, which corrects an error and aligns a term with Regulation No. 128 (ECE/TRANS/WP.29/GRE/2017/19). GRE adopted the amendment as draft Supplement 46 to the 03 series of amendments and requested the secretariat to submit it to WP.29 and AC.1 for consideration and vote at their March 2018 sessions.
|
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
|
GRE/2017/16 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/16
|
|
Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every “maximum test temperature”. The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/17 | Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/17
|
|
Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/21 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/21
|
|
Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to - introduce provisions for LED substitute light sources into Regulation No. 128;
- introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
- establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/22 | Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
|
Reference Number: GRE/2017/22
|
|
Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 09 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-02 | Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
|
Reference Number: GRE-78-02
|
|
Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 02 Oct 17
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-18 | Distinction between "approval code" and "approval number" under the 1958 Agreement
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE-78-28 | Comments on GRE/2017/17 and GRE/2017/22
GRE-78-33 | Modification to document GRE/2017/22
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
16. The expert from GTB proposed to correct and amend some specifications in the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/GRE/2017/18). The expert from IEC proposed another correction to R.E.5 (GRE-78-19 and Annex III). GRE adopted these proposals and requested the secretariat to submit them to WP.29 for consideration and adoption at the March 2018 session as draft Amendment 1 to the original version of R.E.5.
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
|
GRE/2017/16 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/16
|
|
Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every “maximum test temperature”. The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/17 | Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/17
|
|
Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/21 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/21
|
|
Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to - introduce provisions for LED substitute light sources into Regulation No. 128;
- introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
- establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/22 | Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
|
Reference Number: GRE/2017/22
|
|
Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 09 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-02 | Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
|
Reference Number: GRE-78-02
|
|
Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 02 Oct 17
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-18 | Distinction between "approval code" and "approval number" under the 1958 Agreement
GRE-78-28 | Comments on GRE/2017/17 and GRE/2017/22
GRE-78-33 | Modification to document GRE/2017/22
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
17. The expert from GTB presented revised amendments to Regulation No. 128 and to R.E.5 which introduced requirements, test specifications and new categories for light emitting diode (LED) substitute light sources (ECE/TRANS/WP.29/GRE/2017/17, ECE/TRANS/WP.29/GRE/2017/21). The proposals also included collective amendments to Regulations Nos. 48, 53, 74, 86 (ECE/TRANS/WP.29/GRE/2017/22 and GRE-78-02). The experts from Italy and OICA submitted written comments on the proposals (GRE-78-33 and GRE-78-28).
18. GRE noted that, compared to the original GTB proposals that had been considered at the previous session, the revised proposals contained safeguards against the possible misuse of LED substitutes as retrofits in lamps and/or vehicles that were not type approved for using such light sources. A number of experts were of the view that the proposed measures, such as consumer warning on packaging and a website with a list of compatible vehicle models, were not sufficient and reiterated their concerns as raised at the previous session. The expert of OICA pointed out that, to avoid any responsibility for misusing LED substitutes when installing on old vehicle types, the vehicle manufacturers would have be burdened to extend type approvals pursuant to the earlier series of amendments to Regulation No. 48 (GRE-78-28). GRE acknowledged the problem and noted that the failure detection provisions in Regulation No. 48 should be revised. Some experts advocated the idea of physical keying of LED caps to prevent installing unauthorized substitutes.
19. GRE noted that the discussion addressed two different, but interrelated issues: (a) allowing LED substitutes for new type approvals, as part of Original Equipment Manufacturer (OEM) and Original Equipment Supplier (OES), and (b) using LED as retrofits on old vehicle types. Some experts were of the view that the two cannot be separated from one another. To make progress, GRE agreed to establish a task force. The expert from Germany stated that another expert from his country would act as Chair of the task force, while the expert from UK provisionally agreed to become Co-Chair. The expert from IEC volunteered to provide secretarial support.
|
GRE-78-02 | Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
|
Reference Number: GRE-78-02
|
|
Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 02 Oct 17
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-28 | Comments on GRE/2017/17 and GRE/2017/22
GRE-78-33 | Modification to document GRE/2017/22
GRE/2017/17 | Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/17
|
|
Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/21 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/21
|
|
Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to - introduce provisions for LED substitute light sources into Regulation No. 128;
- introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
- establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/22 | Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
|
Reference Number: GRE/2017/22
|
|
Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 09 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
|
GRE/2017/16 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/16
|
|
Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every “maximum test temperature”. The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-18 | Distinction between "approval code" and "approval number" under the 1958 Agreement
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
20. The expert from GTB presented revised proposals for amendments to Regulation No. 128 and to the Consolidated Resolution (R.E.5) with the aim to introduce requirements, test specifications and a new category for forward lighting LED light sources (ECE/TRANS/WP.29/GRE/2017/16, ECE/TRANS/WP.29/GRE/2017/20). GRE adopted the amendments and requested the secretariat to submit them to WP.29 and to AC.1 (Regulation No. 128 only) for consideration and vote at their March 2018 sessions. GRE noted that, if adopted, the R.E.5 amendment would enter into force on the same day as the corresponding supplement to Regulation No. 128.
|
GRE/2017/16 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/16
|
|
Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every “maximum test temperature”. The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
|
GRE/2017/17 | Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/17
|
|
Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/21 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/21
|
|
Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to - introduce provisions for LED substitute light sources into Regulation No. 128;
- introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
- establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/22 | Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
|
Reference Number: GRE/2017/22
|
|
Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 09 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-02 | Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
|
Reference Number: GRE-78-02
|
|
Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 02 Oct 17
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-18 | Distinction between "approval code" and "approval number" under the 1958 Agreement
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE-78-28 | Comments on GRE/2017/17 and GRE/2017/22
GRE-78-33 | Modification to document GRE/2017/22
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|
|
21. The expert from IEC pointed out that Regulations Nos. 37, 99 and 128 prescribe the approval code for the marking of light sources, however, in some instances the wording “approval number” is used. He proposed to correct the inconsistencies, specifically because Schedule 4 to the revised 1958 Agreement makes a distinction between the approval number and the approval code (GRE-78-18). The expert from the Netherlands volunteered to work with IEC to find a better solution for the communication form in Annex 1 to the above Regulations and to prepare an official document for the next session of GRE.
|
GRE-78-18 | Distinction between "approval code" and "approval number" under the 1958 Agreement
|
|
|
GRE/2017/16 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/16
|
|
Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every “maximum test temperature”. The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/17 | Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/17
|
|
Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 10 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/21 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/21
|
|
Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to - introduce provisions for LED substitute light sources into Regulation No. 128;
- introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
- establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/22 | Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
|
|
Reference Number: GRE/2017/22
|
|
Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 09 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-02 | Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
|
|
Reference Number: GRE-78-02
|
|
Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 02 Oct 17
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE-78-28 | Comments on GRE/2017/17 and GRE/2017/22
GRE-78-33 | Modification to document GRE/2017/22
GRE/2017/18 | Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
|
|
Reference Number: GRE/2017/18
|
|
With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE-78-19 | RE5: Proposal for Amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
GRE/2017/19 | Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
|
|
Reference Number: GRE/2017/19
|
|
Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2017/20 | Proposal for Supplement 7 to the original version of Regulation No. 128
|
Proposal for Supplement 7 to the original version of Regulation No. 128
|
|
Reference Number: GRE/2017/20
|
|
Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 78th GRE session (24-27
Oct 2017)
|
|
Document date: 07 Aug 17
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
|