The document addresses open issues and comments regarding UN R11 and GTR No. 1 concerning emergency door opening. It proposes defining vehicle master control switch as the device bringing onboard electronics from off to normal operation mode, and suggests activating this switch rather than switching ignition on in test procedures. The document defines main power supply as power source(s) and supply path(s) normally used for door system operation, excluding secondary or back-up supply. It raises concerns about secondary or back-up power supply failure occurring in the field before emergencies despite compliant test results. The document discusses objective intuitiveness criteria including visibility, accessibility, discoverability, identification, and operability. It recommends standardized marking for exterior door handles and proposes that door opening and closing procedures be described in vehicle owners’ manuals.

Proposal to insert new paragraphs in Section I defining the background, scope, and technical rationale for emergency door opening provisions addressing power loss scenarios, insert new paragraphs 3.25. to 3.31. in Section II defining terms including “latch release control”, “door handle”, “retractable door handle”, “unlock”, “unlatch”, and “power loss”, insert new para. 4.3. establishing requirements for exterior and interior door operation with intuitively accessible latch release controls and door handles on doors providing direct occupant access, insert new para. 5.4. specifying that latch release controls and door handles shall be intuitive, that power-assisted latch release controls shall remain capable of unlatching doors after power loss for at least 60 minutes through secondary mechanical means, active secondary power supply, or fail-safe systems, that power-assisted latch release and unlocking controls shall similarly remain functional after 60 minutes of power loss, that power-assisted door opening systems shall remain manually openable after power loss, that door handles including retractable door handles shall provide accessible gripping features to unlatched doors after power loss, and that unlocking means and latch release controls shall be unobstructed, directly visible, and not located in storage devices or obstructed by interior components, and insert new Annex 6 specifying test procedures for interior and exterior door operation after power loss, including vehicle preparation steps, 60-minute waiting periods, and opening procedures to be completed within 10 minutes with up to five cycles per door.

Working draft proposal to:

• Amend paragraph 1.1. to include application to evacuation of occupants in emergency event
• Amend the definition of child safety lock system in paragraph 2.7.1. to specify prevention of unlatching when interior latch release control is activated and describe normal locked/unlocked logic when inactive,
• Amend the definition of full locking system in paragraph 2.7.2. to refer to interior latch release control,
• Amend the definition of door closure warning system in paragraph 2.9. to replace ignition with master control switch,
• Insert new paragraphs 2.30. to 2.38. defining latch release control, door handle, retractable door handle, unlock, unlatch, power loss, vehicle master control switch, main power supply, and door opening,
• Insert new paragraph 5.4. establishing requirements for exterior and interior door operation including latch release controls, door handles, and unlocking means,
• Amend paragraphs 6.3.1. to 6.3.2. to address exterior and interior locking devices and full locking systems with reference to master control switch deactivation and alarm or acoustic warning provisions,
• Insert new paragraph 6.4. prescribing intuitive operation of latch release controls and door handles, requirements for power-assisted systems to function after power loss for 60 minutes, and door handle design for opening after power loss,
• Insert new paragraph 7.3. requiring testing of power-assisted latch release controls and door opening systems in accordance with Annex 7,
• Insert new Annex 7 establishing a power loss test procedure to verify door opening functionality from interior and exterior following main power supply disconnection, with 60-minute wait before testing and door opening completion required within 80 minutes after power disconnection based on GRSP-78-20/Rev.1 and GRSP-78-48.

The agenda includes adoption of meeting minutes from the 5th EDO Meeting and two intermediate sessions, documents for WP.29’s 200th session requesting authorization to amend UN GTR No. 1 and 14, transformation to IWG with Terms of Reference and Rules of Procedure, amendments to UN Regulation No. 11 and No. 21, discussion of open items, and preparation of working documents for GRSP’s 80th session.