Session 104 | Geneva | 15-19 Apr 2013
6. Regulation No. 58 (Rear underrun protection)
GRSG-104-49 | Heavy Goods Vehicle Under Run Protection Presentation in support of revisions to the current underrun protection vehicle specifications.
GRSG-104-50 | Position on Improved Heavy Goods Vehicle Rear Under-Run Protection Position paper arguing for improvements in rear underrun protection.
GRSG/2011/19 | Proposal for amendments to Regulation No. 58 Text prepared by the expert from Germany to introduce more stringent requirements for rear under run protection devices.
GRSG-104-51 | Rear underrun protection devices – Information on the cost benefit analysis performed by Germany At the 100th GRSG session, Germany presented the document GRSG/2011/19 to propose more demanding requirements for rear underrun protection devices on heavy goods vehicles. The target is to ensure a higher level of safety for passenger car occupants, who have a high risk to get severely or fatally injured in case of hitting the rear of a truck or trailer. This document provides a cost-benefit analysis in support of the proposal.
9. Revisions and extensions of approvals
GRSG/2013/8 | Proposal for amendments to Regulations Nos. 18, 34, 35, 43 and 58 Text prepared by the International Organization of Motor Vehicle Manufacturers (OICA) to introduce the concept of "revision of approvals" in the UN Regulations under the responsibility of the Working Party on General Safety Provisions (GRSG).
GRSG-104-49
Heavy Goods Vehicle Under Run Protection (FIA Foundation)
17 Apr 2013 Working Party Informal Documents Rear Underrun Protection Devices Rear Underrun Protection Devices Uniform Provisions Concerning the Approval of: I. Rear Underrun Protective Devices (RUPDS) II. Vehicles with regard to the Installation of an RUPD of an Approved Type III. Vehicles with regard to their Rear Underrun Protection (RUP) Presentation in support of revisions to the current underrun protection vehicle specifications. GRSG-104-0049
GRSG-104-50
Position on Improved Heavy Goods Vehicle Rear Under-Run Protection (FIA Foundation)
17 Apr 2013 Working Party Informal Documents Rear Underrun Protection Devices Rear Underrun Protection Devices Uniform Provisions Concerning the Approval of: I. Rear Underrun Protective Devices (RUPDS) II. Vehicles with regard to the Installation of an RUPD of an Approved Type III. Vehicles with regard to their Rear Underrun Protection (RUP) Position paper arguing for improvements in rear underrun protection. GRSG-104-0050
GRSG-104-51
Rear underrun protection devices – Information on the cost benefit analysis performed by Germany (Germany)
18 Apr 2013 Working Party Informal Documents Rear Underrun Protection Devices Rear Underrun Protection Devices Uniform Provisions Concerning the Approval of: I. Rear Underrun Protective Devices (RUPDS) II. Vehicles with regard to the Installation of an RUPD of an Approved Type III. Vehicles with regard to their Rear Underrun Protection (RUP) At the 100th GRSG session, Germany presented the document GRSG/2011/19 to propose more demanding requirements for rear underrun protection devices on heavy goods vehicles. The target is to ensure a higher level of safety for passenger car occupants, who have a high risk to get severely or fatally injured in case of hitting the rear of a truck or trailer. This document provides a cost-benefit analysis in support of the proposal. GRSG-104-0051
GRSG/2013/8
Proposal for amendments to Regulations Nos. 18, 34, 35, 43 and 58 (OICA)
01 Feb 2013 Working Party Formal Documents Protection of Vehicles Against Unauthorized Use Unauthorized Vehicle Use Uniform Provisions Concerning the Approval of Motor Vehicles with regard to their Protection Against Unauthorized Use Prevention of Fire Risks Fuel Tanks Uniform Provisions Concerning the Approval of Vehicles with regard to the Prevention of Fire Risks Arrangement of Foot Controls Foot Controls Uniform Provisions Concerning the Approval of Vehicles with regard to the Arrangement of Foot Controls Safety Glazing Materials Safety Glazing Uniform Provisions Concerning the Approval of Safety Glazing Materials and their Installation on Vehicles Rear Underrun Protection Devices Rear Underrun Protection Devices Uniform Provisions Concerning the Approval of: I. Rear Underrun Protective Devices (RUPDS) II. Vehicles with regard to the Installation of an RUPD of an Approved Type III. Vehicles with regard to their Rear Underrun Protection (RUP) Text prepared by the International Organization of Motor Vehicle Manufacturers (OICA) to introduce the concept of "revision of approvals" in the UN Regulations under the responsibility of the Working Party on General Safety Provisions (GRSG). GRSG/2013/0008