IWG RD-ASEP status report to GRBP-83 after the 10th session in December 2025. Work on RD-ASEP for UN R51 is developing a mandatory procedure after the monitoring phase, while R41 work has concluded. The Data Analysis Task Force reported on database sufficiency, boundary conditions, CVT vehicle modelling, and potential inclusion of N₂/N₃/M₂/M₃ vehicles. An Editing Task Force created a consolidated R51.04 draft reviewed in December. IWG RD-ASEP recommends no monitoring requirements be approved without corresponding mechanisms to collect, analyze, and report results. M category/R51 informal document submission expected September 2026 and working document February 2027. L-category/R41 requires no further action.

Proposal to supersede document GRBP/2026/4 intended to introduce a “default mode”, to specify requirements to be applied to the emission of Enhanced Exterior Sound (EES), with corresponding transitional provisions, and to draw a limit curve to introduce electric vehicles and hybrid electric vehicles that can be propelled without an internal combustion engine operating in the scope of ASEP (Annex 7).

Proposal to amend Annex 3 of UN Regulation No. 51-02, paragraph 3.1.2.3.2.3, third paragraph, to require gear shifts beginning with (x/n) continue in all gears at which rated engine speed is reached immediately before the rear of the vehicle passes line BB’, rather than being completed in gear X only, based on WP.29-196-08 and WP.29-197-11 findings of non-compliance with permissible sound level requirements for category N₃G vehicles during state control testing.

ISO 362-3:2022 specifies an engineering method for measuring pass-by sound level of a vehicle under controlled indoor conditions using a semi-anechoic chamber. The 2022 edition incorporates technological advancements and improves usability and accuracy of the measurement procedure. Improvements include additional microphones, tire temperature correction harmonized with UN R51.03, clarified indoor room qualification criteria, and normalized torque influence equation. Transitional provisions propose accepting ISO 362-3:2022 for all approvals from entry into force of Supplement 11, while ISO 362-3:2016 remains accepted for five years thereafter.

Consolidation in Supplement 11 includes: clarification of Verification/Adjustment and editorial corrections with transitional provisions (GRBP/2025/20 with GRBP-82-07); correction of Tyre Road Sound Measurement for Indoor-Testing (GRBP-82-22); introduction of ASEP in Annex 7 for BEVs and HEVs (GRBP/2026/4 with GRBP-83-xx); update of ISO standards in Annex 3 and Annex 8 (GRBP/2026/5 with GRBP-83-xx); and reference for Power Definition regarding new UN R177 (GRBP/2026/13). The consolidated version of Supplement 11 is to be submitted to the 199th WP.29 in June.