Proposal to align the provisions for retreaded tyres with the proposals of France for UN Regulation No. 30 and of the European Tyre and Rim Technical Organization (ETRTO) for UN Regulation No. 117.

Proposal to align the provisions for retreaded tyres with the proposals of the European Tyre and Rim Technical Organization (ETRTO) for UN Regulations Nos. 54 and 117.

Proposal to amend the extended mobility tyre (EMT) symbol following the detection of dimensional inconsistencies within the International Organization for Standardization Working Group (ISO) TC31/SC3/WG19, where the dimension “0,33h” was judged wrong and constituting an unnecessary over constraint and to amend the inflation value to be used for the tyre conditioning when assessing the “flat tyre running mode” of “run flat tyres” and of “extended mobility tyres”.

Proposal prepared by the Task Force on Studded Tyres (TF ST) to establish a new UN Regulation on uniform provisions concerning the approval of studded tyres with regard to their snow performance (distinguished from studdable tyres regulated by UN Regulation No. 117).

Proposal prepared by the experts on communication interfaces of the Task Force on Tyre Pressure Monitoring System and Tyre Installation (TF TPMSTI) to update the requirements on the communication interfaces between towing and towed vehicles.

Proposal to require wheel attachments with three or more fixing components (nuts or studs) in the scope of the Regulation, to restrict the difference in pitch circle diameter (PCD) of a wheel type comprised of more than two versions, to carry out additional rotating bending tests on each version with a PCD difference to a tested version of more than 6.5 mm, and to establish specifications for comparison of replica wheels with the minimum level of the vehicle manufacturer´s replacement wheels.