Document GRSG-113-02
Rationale for the proposed amendments to Regulation No. 110

Rationale for the proposal to harmonize UN R110 with ISO 11439:2013.

Submitted by ISO
Discussions and Outcomes
WP.29/2018/22
GRSG/2017/31

38. The expert from ISO introduced GRSG-113-02 and GRSG-113-37 justifying the alignment of the provisions in the UN Regulation with those in the latest version of ISO 11439:2013 (as proposed in ECE/TRANS/WP.29/GRSG/2017/31). The expert from OICA expressed his preference to adopt the proposal as a new series of amendments and suggested inserting transitional provisions (GRSG-113-21). GRSG agreed on the need to insert transitional provisions and to replace the dynamic references to international standards by static ones. Following the discussion, the expert from ISO presented GRSG-113-38 taking into account the comments received. GRSG considered the document in detail and adopted the proposal as reproduced in Annex IV (based on GRSG-113-38-Rev.1). The secretariat was requested to submit it to WP.29 and AC.1, as a new draft 03 series of amendments to UN Regulation No. 110, for consideration at their March 2018 sessions.

GRSG/2016/22

32. The expert from ISO presented an overview of the activities of his organization on specific aspects for gaseous fuels (GRSG-111-25). He introduced GRSG-111-02 with the rationale of all amendments proposed to UN Regulation No. 110 in document ECE/TRANS/WP.29/GRSG/2016/22 superseding ECE/TRANS/WP.29/GRSG/2016/6. GRSG welcomed GRSG-111-03 listing the copies of all ISO standards referenced to in UN Regulation No. 110 on CNG/LNG vehicles. A number of experts raised a concern on the dynamic referencing of international standards and expressed their preference for a static referencing, mainly for legal purposes. GRSG reviewed the document and agreed on the need to adopt the proposal as a new 03 series of amendments and to insert transitional provisions triggered of the 1 September. The expert from France asked for more detailed information on each of the proposed amendments, especially on the level of stringency and their impact on technical services. The expert from CLEPA underlined the need to also insert transitional provisions for existing type approvals and sufficient lead time for suppliers to upgrade them.

33. Following study reservations by the experts from Germany, France and CLEPA, GRSG decided to resume consideration of the proposal at its next session in April 2017 based on a revised document to be submitted by ISO. The Chair invited all experts to send their written comments on GRSG-111-02-Rev.1 in due time to the experts from ISO or NGV Global.