Proposal to refine the scope by replacing the phrase “can travel” by “can be propelled”. The use of “travel” in the scope can be interpreted to include vehicles using using electrical systems for purposes other than propulsion (e.g., energy recuperation) that fall outside the test conditions of UN R138. The proposal further amends:

1. Paragraph 2.7. to make clear the “pause function” refers to systems that allow the driver to deactivate an AVAS system;
2. Paragraph 6.2.6.: The vehicle operator shall not deactivate AVAS while driving. However, the manufacturer shall be enabled to activate or deactivate AVAS, including automatically, by regional coding according to legal provisions of various markets.
3. Paragraph 11.: the transitional provisions were added according to the rules of WP.29 for new series of amendments. Paragraph 11.6. has been added to maintain approvals that also comply with the new series of amendments, as is the case for vehicles that do not have a pause function according to the newly suggested paragraph 6.2.6.
4. Annex 1, Addendum to the communication form No …, Technical Information: technical information regarding “Pause switch (yes/no)” will be no longer necessary.

Proposal to

1. exempt hybrid vehicles that do not provide valid test results (e.g., internal combustion engine active under test conditions)
2. clarify the text concerning permissible AVAS operating conditions
to differentiate indoor and outdoor facility requirements (e.g., weather station requirement) and
3. update flowcharts in Annex 3 in line with text.
4. add a footnote to the scope to exempt electrified vehicles where the internal combustion engine (ICE) operates under the test conditions
5. clarify the intention of paragraph 6.2.:
   • that AVAS may be operational outside the specified speed ranges (e.g., in the USA where the speed range extends to 30 km/h),
   • align maximum sound with UN R51.03 ASEP, and
   • explicitly specify that the AVAS may function even when the ICE is running
6. clarify under paragraph 6.2.6. that a manufacturer may install an attenuation to enable the system to operate at different sound levels
7. split and clarify indoor and outdoor testing specifications under Annex 3 paragraph 2.2. to account for different needs such as a weather station
8. amend the flowcharts in the Annex 3 Appendix to better reflect the regulation text
9. align the transitional provisions in the 01 series of amendments with the format introduced following Revision 3 of the 1958 Agreement.