GAR | GRSG-113

Meeting documents

Download: GRSG/2017/13	from UNECE:	.pdf format	.docx format
Download: GRSG/2017/13/Add.1	from UNECE:	.pdf format	.docx format

previous agenda item

next agenda item

4. (a) Amendments to safety glazing regulations: Regulation No. 43

Other documents

GRSG/2017/15 | Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43

Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43

Reference Number: GRSG/2017/15

Proposal to align UN R43 with GTR 6 and UN R125 with regard to the aiming positions of the driver’s eyes. This proposal corrects inconsistencies introduced during the transposition of GTR 6 into UN R43.

Submitted by: OICA

Meeting Sessions: 113th GRSG session (10-13 Oct 2017)

Document date: 14 Jul 17

Document status: Superseded

Relevant to

UN Regulation No. 43 | Safety Glazing Materials

View full document file for more information

Download from UNECE:

.pdf format

.docx format

GRSG-113-16 | Proposal for draft amendments to UN Regulation No. 43

Proposal for draft amendments to UN Regulation No. 43

Reference Number: GRSG-113-16

Proposal to align UN R43 with values in GTR No. 6 and UN R125 with regard to the aiming positions of the driver’s eyes.. This document complements and completes the proposal in document GRSG/2017/15.

Submitted by: OICA

Meeting Sessions: 113th GRSG session (10-13 Oct 2017)

Document date: 03 Oct 17

Document status: Superseded

Relevant to

UN Regulation No. 43 | Safety Glazing Materials

View full document file for more information

Download from UNECE:

.pdf format

.docx format

GRSG-113-30 | Comment on GRSG/2017/15: Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43

Comment on GRSG/2017/15: Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43

Reference Number: GRSG-113-30

Proposal to correct document GRSG/2017/15 based upon comparison against GTR No. 6. The table being revised is in Annex 18 (not 21). This proposal further corrects several values in the table per the original table developed under GTR 6.

Submitted by: India

Meeting Sessions: 113th GRSG session (10-13 Oct 2017)

Document date: 09 Oct 17

Document status: Superseded

Relevant to

UN Regulation No. 43 | Safety Glazing Materials

View full document file for more information

Download from UNECE:

.pdf format

.docx format

WP.29/2017/111 | Proposal for Supplement 6 to the 01 series of amendments to UN Regulation No. 43

Proposal for Supplement 6 to the 01 series of amendments to UN Regulation No. 43
Reference Number: WP.29/2017/111
Proposal to align the headform test with the deceleration measurement and the test of resistance to abrasion with ISO 15082:2016-11, including changes to the test details, correction of the headform calibration values, and the introduction of abrasion reference materials. The latter is combined with an abrasive-wheel qualification and a correction calculation (for plastic materials only). The proposal also amends Figure 2a of Annex 21 to better reflect the meaning of paragraph 2.4.2.2. of Annex 21, mainly to clarify the lateral limits of any opaque obscuration in this area.
Meeting Sessions: 173rd WP.29 session (14-17 Nov 2017)
Document date: 18 Aug 17
Document status: Adopted text published
Relevant to UN Regulation No. 43 \| Safety Glazing Materials
Adoption Vote
This proposal (WP.29/2017/111) was adopted by the World Forum. Thirty-five Contracting Parties out of the 47 applying UN R43 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
View full document file for more information

Download from UNECE:

.pdf format

.docx format