4.9.1. | Proposal for Supplement 19 to the 04 series of amendments to UN Regulation No. 48 (Installation of lighting and light-signalling devices) |
ECE/TRANS/WP.29/GRE/83, para. 22, based on ECE/TRANS/WP.29/GRE/2020/3 and GRE-83-52.
WP.29/2021/28 | UN R48: Proposal for Supplement 19 to the 04 series of amendments
Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use).
|
WP.29/2021/28 | UN R48: Proposal for Supplement 19 to the 04 series of amendments
Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use).
|
4.9.2. | Proposal for Supplement 14 to the 05 series of amendments to UN Regulation No. 48 (Installation of lighting and light-signalling devices) |
ECE/TRANS/WP.29/GRE/83, para. 22, based on ECE/TRANS/WP.29/GRE/2020/3 and GRE-83-52.
WP.29/2021/29 | UN R48: Proposal for Supplement 14 to the 05 series of amendments
Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use).
|
WP.29/2021/29 | UN R48: Proposal for Supplement 14 to the 05 series of amendments
Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use).
|
4.9.3. | Proposal for Supplement 14 to the 06 series of amendments to UN Regulation No. 48 (Installation of lighting and light-signalling devices) |
ECE/TRANS/WP.29/GRE/83, paras. 21, 22 and 25, based on ECE/TRANS/WP.29/GRE/2020/2, ECE/TRANS/WP.29/GRE/2020/3, ECE/TRANS/WP.29/GRE/2020/24, GRE-83-06 and GRE-83-52.
WP.29/2021/30 | UN R48: Proposal for Supplement 14 to the 06 series of amendments
Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering, and to re-introduce provisions that were omitted by mistake in previous amendments.
|
WP.29/2021/30 | UN R48: Proposal for Supplement 14 to the 06 series of amendments
Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering, and to re-introduce provisions that were omitted by mistake in previous amendments.
|
4.9.4. | Proposal for Supplement 1 to the 07 series of amendments to UN Regulation No. 48 (Installation of lighting and light-signalling devices) |
ECE/TRANS/WP.29/GRE/83, paras. 21, 22 and 25, based on ECE/TRANS/WP.29/GRE/2020/2, ECE/TRANS/WP.29/GRE/2020/3, ECE/TRANS/WP.29/GRE/2020/24, GRE-83-06 and GRE-83-52.
WP.29/2021/31 | UN R48: Proposal for Supplement 1 to the 07 series of amendments
Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering and to re-introduce provisions that were omitted by mistake in previous amendments.
|
WP.29/2021/31 | UN R48: Proposal for Supplement 1 to the 07 series of amendments
Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering and to re-introduce provisions that were omitted by mistake in previous amendments.
|
Reference No. | Description (click for more information) | ||||||
---|---|---|---|---|---|---|---|
WP.29/2021/28 |
UN R48: Proposal for Supplement 19 to the 04 series of amendments
|
31 Dec 2020 | World Forum | Formal Documents | Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices | Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use). | WP.29/2021/0028 |
WP.29/2021/29 |
UN R48: Proposal for Supplement 14 to the 05 series of amendments
|
31 Dec 2020 | World Forum | Formal Documents | Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices | Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use). | WP.29/2021/0029 |
WP.29/2021/30 |
UN R48: Proposal for Supplement 14 to the 06 series of amendments
|
31 Dec 2020 | World Forum | Formal Documents | Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices | Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering, and to re-introduce provisions that were omitted by mistake in previous amendments. | WP.29/2021/0030 |
WP.29/2021/31 |
UN R48: Proposal for Supplement 1 to the 07 series of amendments
|
31 Dec 2020 | World Forum | Formal Documents | Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices | Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering and to re-introduce provisions that were omitted by mistake in previous amendments. | WP.29/2021/0031 |