The provisional agenda for the tenth meeting of the Informal Working Group on EV/HFCV Retrofit Systems on Thursday 2nd July 2026 includes adoption of the agenda, approval of minutes, coordination and organization of work with reference to GRPE-92-14, EV/HFCV-02-02, GRPE-93-22/Rev.1, GRSP-78-17, GRVA-25-19, and WP.29-199-16, electrical safety review, braking, EMC, power determination and battery range, UN Draft, and any other business, with subsequent meetings scheduled for 9th September online and 8th October online.

Proposal to add an Abbreviations section, redefine scope to apply to electric powertrain retrofit systems for M₁–M₃ and N₁–N₃ vehicle categories intended to be transformed into pure electric vehicles (EV) or Hydrogen Fuel Cell Vehicles (HFCV), replace “conversion” terminology with “transformation” throughout, separate requirements into distinct annexes for EVs and HFCVs, add a Provisions for PTI section specifying retrofit system identifiability and certificate requirements, insert transitional dates for REESS compliance with UN Regulation 100 (31 August 2027 onwards for new types; 31 August 2029 onwards for all types), insert transitional dates for braking compliance with UN Regulation 13 (31 August 2026–2029 for new types; 31 August 2028–2031 for all types) and UN Regulation 13-H (31 August 2028 for new types; 31 August 2030 for all types), add mass distribution verification requirements when unladen weight variation exceeds 5%, and align mass and dimensions procedures with regional requirements such as EU 2021/535.

Proposal to establish uniform provisions for approval of electric powertrain retrofit system installation on vehicles of categories M₁–M₃ and N₁–N₃:

• Add abbreviations section,
• Insert definitions of electric powertrain retrofit system, vehicle installation approval, approval of electric powertrain retrofit system, type of electric powertrain retrofit system, original vehicle, parent vehicle, and member of family,
• Modify scope to apply to electric powertrain retrofit systems and their installation on vehicles transformed,
• Delete prior scope provisions,
• Renumber paragraphs accordingly,
• Insert markings requirements for retrofit system installation plates,
• Add approval procedures and communication forms,
• Insert specific requirements regarding electric powertrain retrofit systems with compliance to applicable UN Regulations including UN R10, UN R13, UN R13H, UN R85, and UN R100,
• Insert application range provisions,
• Modify installer authorization requirements,
• Insert information requirements for retrofit system manufacturers to provide installers,
• Insert end-user manual requirements,
• Add provisions for periodic technical inspection including retrofit system identifiability and certification requirements,
• Insert conformity of production procedures,
• Modify procedures for extension and modification of approval,
• Modify penalties for non-conformity and withdrawal procedures,
• Insert introductory provisions explaining the Regulation’s purpose,
• Insert names and addresses reporting requirements for technical services and type approval authorities,
• Split Annexes 1, 2, 3, 4, 5, 6, and 7 into separate provisions for electric vehicles and hydrogen fuel cell vehicles,
• Insert Annex 5 specific requirements aligned with UNECE Regulations including electromagnetic compatibility, braking, electric drive train power measurement, rechargeable energy storage system compliance with phased timeline from date of entry into force to 1 September 2031 for UNECE Regulation 100 compliance, and other applicable regulations.

Updates and comments on the draft uniform provisions establishing harmonized methods for the approval of vehicles transformed with electric powertrain retrofit systems for categories M₁–M₃ and N₁–N₃. Requirements cover application for approval, markings on transformation plates, type approval procedures, general and specific requirements for retrofit systems, application range definitions, installer authorization and responsibilities, information to be provided by manufacturers to installers, end-user manuals, conformity of production procedures, modification and extension of approval, withdrawal of approvals, and notification procedures to contracting parties. Specific compliance is required with UN R10, UN R13, UN R13H, UN R85, UN R100, UN R121, UN R134, UN R138, UN R79, UN R155, UN R154, and UN R49, with staged implementation dates for certain requirements such as rechargeable energy storage system compliance from 1 September 2027 onwards and braking system compliance from 1 September 2026 onwards.

The Informal Working Group on EV/HFCV Retrofit Systems held its tenth meeting on 2nd July 2026 in Brussels. The group reviewed progress reports presented to WP.29 Working Parties, referencing GRPE-92-14, GRPE-93-22-Rev.1, GRSP-78-17, GRVA-24-07, GRPE-94-06, and GRVA-25-19. Electrical safety will be reviewed later pending clarification on UN Regulation No. 100. The group excluded UN Regulation No. 155 from draft requirements to avoid cybersecurity complications. Braking requirements for retrofitted vehicles and applicability of UN Regulation No. 13/13-H require further assessment. Further coordination with the EMC Informal Working Group is required. The group distinguished battery range requirements for light-duty vehicles from heavy-duty vehicles.

The agenda includes adoption of the coordination and organization of work with reference to GRPE-92-14, EV/HFCV-02-02, GRPE-93-22-Rev.1, GRSP-78-17, GRVA-25-19, WP.29-199-16, and other documents, electrical safety review, braking, EMC, power determination and battery range, UN draft discussion, and any other business, with a next meeting scheduled for 8th October online.

This regulation proposes uniform provisions for the approval of electric powertrain retrofit systems (EPRS) intended for the conversion of vehicles of categories M and N to electric propulsion. It establishes requirements for EPRS design, installation by authorized installers, type approval procedures, application ranges, markings, conformity of production, and modification or extension of approvals. Specific requirements for compliance with applicable UN Regulations are defined, including electromagnetic compatibility, braking, power measurement, rechargeable energy storage systems, and mass and dimension limits. The regulation applies to both pure electric vehicles (EV) and hydrogen fuel cell vehicles (HFCV).

Minutes of the eleventh meeting of the IWG on EV/HFCV Retrofit Systems held on 9 September 2026. The group adopted the provisional agenda and reviewed the draft UN Regulation on EV/HFCV retrofit systems. Key discussions addressed the regulatory concept for approval of the Electric Powertrain Retrofit System combined with installation requirements and vehicle testing, vehicle scope including possible exclusion of older vehicles and those subject to UN Regulations Nos. 155 and 156, and confirmation that HFCV provisions would remain as placeholders for later development. The updated working document will be circulated before submission to GRPE in October 2026.

Proposal for a new UN Regulation establishing uniform provisions for type approval of Electric Powertrain Retrofit Systems (EPRS) designed for conversion of vehicles of categories M and N to full electric propulsion. The regulation does not apply to vehicles holding approval under UN R155 or UN R156. It sets out requirements for EPRS manufacturers, installers, markings, approval procedures, general and specific technical requirements for retrofit systems, installer authorization and training, documentation to be provided by manufacturers, conformity of production, modification and extension of approvals, and penalties for non-conformity.

Provisional agenda for the twelfth meeting of the IWG on EV/HFCV-RS to be held on 28 September 2026. The agenda covers adoption of the agenda, approval of minutes from the previous meeting, coordination and organization of work, power determination and battery range, UN draft documents, and any other business, with the next meeting scheduled for 8 October 2026.

The agenda covers welcome and adoption of the agenda, approval of minutes from the previous meeting, coordination and organization of work, power determination and battery range, UN Draft discussion, any other business, and notification of next meetings.

Document presents technical challenges to defining retrofit kit types for electric conversion and approval processes. Identifies that retrofit kit type perimeter depends on the regulation considered, with different requirements across UN R10, R13, R100, R85, R138, WLTP, R79, R39, R51, R89, R121, and R122. Presents testing challenges at vehicle, component, and EPRS levels, noting that testing a kit type not installed on a vehicle is impossible to account for all impacts on the vehicle.

Minutes of the twelfth meeting of the IWG on EV/HFCV Retrofit Systems held 28 September 2026. The group adopted the provisional agenda and reviewed the work program, aiming to provide GRPE with a first draft of a future UN Regulation by 14–16 October 2026. The group focused on revising definitions in the draft UN Regulation, particularly EPRS definition, EPRS type, vehicle family, and installer provisions. Key unresolved issues include which components must remain identical within an approved type, alternative ways of grouping vehicles within a family, whether installer requirements should be included in the UN Regulation, and the scope regarding vehicles subject to UN Regulations Nos. 155 and 156.