| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|---|---|---|---|---|---|---|---|---|---|
| Document Title | Proposal to amend the dipped-beam headlamp-aiming provisions of document GRE/2013/57 | ||||||||
| Reference Number | GRE-70-42 | ||||||||
| Date |
25 Oct 2013
|
||||||||
| Summary | Proposal to expand the tolerances proposed for the initial aiming of dipped-beam headlamps in order to encompass all vehicle configurations and conform to the practical constraints of vehicle mass production. | ||||||||
| Source(s) | OICA | ||||||||
| Rulemaking Area(s) | UN R48 Installation of Lighting | ||||||||
| Proposal Status | Superseded | ||||||||
| Meeting(s) | |||||||||
| Downloads | |||||||||
| UNECE server | .pdf format | ||||||||
| Excerpts from session reports related to this document | |||||||||
| GRE | Session 70 | 21-23 Oct 2013 |
12. The expert from Poland presented GRE-70-41, introducing ECE/TRANS/WP.29/GRE/2013/57 and proposing performance based requirements on initial aiming of dipped-beam headlamps as an alternative to the existing requirements. The proposal received some comments (GRE-70-42). The expert from France requested adding proper tolerances from the Conformity of Production provisions. GRE agreed to revisit this subject (on initial aiming and considering the original 50 m visibility distance requirement) at its next session on the basis of a revised document, which the expert from Poland volunteered to prepare. |
||||||||