1 2 3 4 5 6 7 8 9 10
Document Title Proposal for Supplement 3 to the 04 Series of Regulation No. 19
Reference Number GRE/2011/47
Date
2 Aug 2011
Source(s) GTB
Rulemaking Area(s) UN R19 Front Fog Lamps
Meeting(s)
Downloads
UNECE server .pdf format
Excerpts from session reports related to this document
GRE | Session 66 | 4-6 Oct 2011

30. GRE considered ECE/TRANS/WP.29/GRE/2011/40 on the use of electronic light source control gear and ECE/TRANS/WP.29/GRE/2011/41, ECE/TRANS/WP.29/GRE/2011/42, ECE/TRANS/WP.29/GRE/2011/47 and GRE-66-18 clarifying the text of the Regulation. GRE adopted ECE/TRANS/WP.29/GRE/2011/40 as amended below, ECE/TRANS/WP.29/GRE/2011/41 not amended, ECE/TRANS/WP.29/GRE/2011/47 not amended, and GRE-66-18 reproduced below, and requested the secretariat to submit them to WP.29 and AC.1 for consideration at their March 2012 session as draft Supplement 4 to the 04 series of amendments to Regulation No. 19. The expert from GTB withdrew ECE/TRANS/WP.29/GRE/2011/42 following the adoption of ECE/TRANS/WP.29/GRE/2011/40.

Paragraph 6.4.1.4., amend to read:

“6.4.1.4. In the case of LED modules:

  • All measurements on front fog lamps equipped with LED module(s) shall be made at 6.3 V, 13.2 V or 28.0 V respectively, if not otherwise specified within this Regulation. LED modules operated by an electronic light source control gear shall be measured with the input voltage as specified by the applicant. or with a supply and operating device which replace this control gear for the photometric test. The relevant input parameters (e.g. duty cycle, frequency, pulse shape, peak voltage) shall be specified and stated in the communication form, item 10.6., in Annex 1 to this Regulation.

  • The measured luminous intensity values shall be multiplied by a factor 0.7 prior to the check for compliance."

Annex 5, paragraph 1.1.2.5., renumber as paragraph 1.1.2.(g).