Working Document GRPE/2019/11

Download in .pdf format Download in .docx format

Document Title

UN R85: Proposal for a new Supplement

Reference Number

GRPE/2019/11

Origin

OICA

Document Date

12 March 2019

Document Posted

13 March 2019

Meeting Session(s)

GRPE | Session 79 | 21-24 May 2019 (Agenda item 5. | UN Regulations Nos. 24 (Diesel smoke), 85 (Measurement of net power), 115 (LPG and CNG retrofit systems), 133 (Recyclability of motor vehicles), and 143 (Heavy-Duty Dual-Fuel Engine Retrofit Systems (HDDF-ERS)))

33. The expert from OICA introduced ECE/TRANS/WP.29/GRPE/2019/11 and GRPE-79-27-Rev.1 that amended the footnote 9 in table 1 of Annex 5 to introduce an alternative for the measurement of power of charge-air-cooled engines. The representative from United Kingdom of Great Britain and Northern Ireland required clarifications on considerations about the test temperature and potential concerns about tests being done at extreme temperatures. Amendments were provided in GRPE-79-27-Rev.1. GRPE supported the new proposal in GRPE-79-27-Rev.1 as reproduced in Annex V of the session report.

34. GRPE endorsed the proposal and requested the secretariat to submit Annex V of the report to WP.29 and the AC.1 for consideration and vote at their November 2019 sessions as draft Supplement 10 to UN Regulation No. 85.

Summary

Proposal to allow an alternative test method to “set the charge air cooler outlet temperature during bench test to temperature which was observed by vehicle test and corrected to the reference temperature specified in paragraph 5.2.1.” of Annex 5. This alternative method is well recognized in SAE J1349.

Regulations

UN Regulation No. 85 | Power Measurement of Internal Combustion Engines and Electric Motors

Document Status

Superseded

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.