Working Document GRPE/2018/19

Download in .pdf format Download in .docx format

Document Title

UN R24: Proposal for amendments

Reference Number

GRPE/2018/19

Origin

OICA

Document Date

26 March 2018

Document Posted

19 April 2018

Meeting Session(s)

GRPE | Session 77 | 4-8 Jun 2018 (Agenda item 5. | Regulations Nos. 85, 115, 133, and 143)

38. The expert from OICA presented GRPE-77-20 that improves the justification of ECE/TRANS/WP.29/GRPE/2018/19 by proposing a solution to align the provisions of the 03 series of amendments to UN Regulation No. 24 with UN Regulation No. 85. GRPE adopted the proposal and requested the secretariat to submit it to WP.29 and AC.1 for consideration and vote at their June 2018 sessions as draft Supplement 4 to the 03 series of amendments to UN Regulation No. 24.

Summary

Proposal to align UN R24 (Compression Ignition Engines – Emission of Visible Pollutants – Power Measurement) with UN R85 with regard to correction factors.

Regulations

UN Regulation No. 24 | C.I. Engine Emissions and Net Power

Document Status

Superseded

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.