IGPG-03 on 21-22 November 2011in Leverkusen (Bayer – Cologne)
[IGPG-04 on 6-7 March 2012 in Bonn]
[IGPG-05 on 5-6 September 2012 in Paris (OICA)]

13. GRSG considered ECE/TRANS/WP.29/GRSG/2011/25, superseding GRSG-99-25, and GRSG-101-06 proposing to amend in Regulation No. 43, the provisions on the burn rate for rigid plastic panes. Following the discussion, GRSG adopted ECE/TRANS/WP.29/GRSG/2011/25, not amended, and requested the secretariat to submit it to WP.29 and AC.1 for consideration at their March 2012 session, as draft Supplement 1 to the 01 series of amendments to Regulation No. 43.

14. The expert from Germany reported on the progress made by the informal group on plastic glazing (GRSG-101-08). GRSG welcomed the information and noted the informal group’s intention to meet again in Leverkusen (Germany) on 21 and 22 November 2011.

19. GRSG considered GRSG-100-04 from CLEPA proposing to amend Regulation No. 43 on the burn rate for rigid plastic panes. GRSG agreed that this proposal should be considered in detail by the informal group on plastic glazing. The secretariat was requested to make GRSG-100-04 available with an official symbol for the next session of GRSG.

20. GRSG considered GRSG-100-05 from CLEPA proposing editorial corrections to the 01 series of amendments to Regulation No. 43. GRSG adopted GRSG-100-05 as reproduced in Annex V to this report, and requested the secretariat to insert these corrections when issuing the 01 series of amendments to Regulation No. 43.

21. The expert from Germany introduced GRSG-100-17 on the progress of the informal group on plastic glazing. GRSG agreed to discuss the issue of the sampling methods used for the headform test at its next session. GRSG noted that the next meeting would be held on 14 and 15 June 2011 in Hamburg (Germany) and agreed to keep as reference document GRSG-99-25 on the draft schedule of work of the informal group.

IGPG-04 : Bonn 6/7 March 2012
IGPG-05 : Paris 5/6 September 2012

Document: GRSG-99-25 (D)

IGPG-05 : Paris 5/6 September 2012

IGPG-06: European Commission January 2013 (To be confirmed)

IGPG-06: European Commission 22-23 January 2013
IGPG-07: JohnDeere 18-19 June 2013

IGPG-07: JohnDeere (Mannheim – Germany) – 18-19 June 2013
IGPG-08: OICA (Paris) – 27-28 November 2013