GAR

Draft New Simplified UN Regulation on Light Signalling Devices (LSD)

Reference Number: GRE-77-05

Proposal for a new regulation to consolidate the current light-signalling regulations from the informal group on the Simplification of Lighting Regulations.

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 14 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

Status update and next steps of the Simplification of Lighting Regulations informal group

Reference Number: GRE-77-32

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 04 Apr 17

Relevant to: WP.29 Regulatory Project | Simplification of Lighting Regulations, UN Regulation No. 149 | Road Illumination Devices (RID), UN Regulation No. 148 | Light-Signalling Devices (LSD), United Nations Agreement | Resolution on the common specification of light source categories (RE 5), and UN Regulation No. 150 | Retro-reflective Devices and Markings (RRD)

Click here to view the full document file

Download from UNECE:

.pdf format

.pptx format

Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting

Reference Number: GRE-77-07

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 17 Mar 17

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD), UN Regulation No. 149 | Road Illumination Devices (RID), and UN Regulation No. 123 | Adaptive Front-lighting Systems

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”

Reference Number: GRE-77-15

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.
Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.
The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.

This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.
In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.
The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 30 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Draft New Simplified UN Regulation on Light Signalling Devices (LSD)

Reference Number: GRE-77-05

Proposal for a new regulation to consolidate the current light-signalling regulations from the informal group on the Simplification of Lighting Regulations.

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 14 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

Status update and next steps of the Simplification of Lighting Regulations informal group

Reference Number: GRE-77-32

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 04 Apr 17

Click here to view the full document file

Download from UNECE:

.pdf format

.pptx format

Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting

Reference Number: GRE-77-07

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 17 Mar 17

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD), UN Regulation No. 149 | Road Illumination Devices (RID), and UN Regulation No. 123 | Adaptive Front-lighting Systems

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”

Reference Number: GRE-77-15

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.
Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.
The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.

This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.
In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.
The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 30 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Draft New Simplified UN Regulation on Light Signalling Devices (LSD)

Reference Number: GRE-77-05

Proposal for a new regulation to consolidate the current light-signalling regulations from the informal group on the Simplification of Lighting Regulations.

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 14 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

Status update and next steps of the Simplification of Lighting Regulations informal group

Reference Number: GRE-77-32

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 04 Apr 17

Click here to view the full document file

Download from UNECE:

.pdf format

.pptx format

Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting

Reference Number: GRE-77-07

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 17 Mar 17

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD), UN Regulation No. 149 | Road Illumination Devices (RID), and UN Regulation No. 123 | Adaptive Front-lighting Systems

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”

Reference Number: GRE-77-15

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.
Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.
The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.

This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.
In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.
The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 30 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Draft New Simplified UN Regulation on Light Signalling Devices (LSD)

Reference Number: GRE-77-05

Proposal for a new regulation to consolidate the current light-signalling regulations from the informal group on the Simplification of Lighting Regulations.

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 14 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

Status update and next steps of the Simplification of Lighting Regulations informal group

Reference Number: GRE-77-32

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 04 Apr 17

Click here to view the full document file

Download from UNECE:

.pdf format

.pptx format

Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting

Reference Number: GRE-77-07

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 17 Mar 17

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD), UN Regulation No. 149 | Road Illumination Devices (RID), and UN Regulation No. 123 | Adaptive Front-lighting Systems

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”

Reference Number: GRE-77-15

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.
Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.
The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.

This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.
In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.
The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.

Submitted by: GTB

Meeting Sessions: 77th GRE session (4-7 Apr 2017)

Document date: 30 Mar 17

Document status: Superseded

Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD)

Click here to view the full document file

Download from UNECE:

.pdf format

.docx format

Documentation

GRE-77-05	Draft New Simplified UN Regulation on Light Signalling Devices (LSD)
GRE-77-07	Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting
GRE-77-15	Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”
GRE-77-32	Status update and next steps of the Simplification of Lighting Regulations informal group