GRSG/2016/16
Proposal for amendments to Regulation No. 110
Proposal for amendments to Regulation No. 110
|
Reference Number: GRSG/2016/16
|
Proposal to allow for the use of natural gas refrigeration systems to vehicles propelled by natural gas (CNG or LNG). This proposal addresses a new, environmentally friendly natural gas fuelled refrigeration system for trucks with refrigerated loads that already are propelled by natural gas. Currently paragraph 18.1.7.1 allows heating systems to be fitted on vehicles to heat the passenger compartment and/or the load area of a vehicle, however, the same provision omits cooling systems that are used on trucks for the carriage of loads requiring refrigeration.
|
Submitted by: France
|
Document date: 22 Jul 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|
GRSG/2016/22
Proposal for amendments to Regulation No. 110
Proposal for amendments to Regulation No. 110
|
Reference Number: GRSG/2016/22
|
Proposal to harmonize UN R110 with standard ISO 11439:2013 on high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles.
|
Submitted by: ISO
|
Document date: 28 Jul 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|
GRSG-111-02
Rationale for the proposal to align Regulation No. 110 with ISO 11439:2013
Rationale for the proposal to align Regulation No. 110 with ISO 11439:2013
|
Reference Number: GRSG-111-02
|
Detailed review of the proposed changes to UN R110.
|
Submitted by: ISO
|
Document date: 28 Jul 16
|
Relevant to
|
View full document file for more information
|
GRSG-111-03
ISO standards referenced to in UN Regulation No. 110 (zip archive)
ISO standards referenced to in UN Regulation No. 110 (zip archive)
|
Reference Number: GRSG-111-03
|
Copies of the ISO standards. Extraction from zip file requires password. GRSG delegations may obtain the password from the secretariat.
|
Submitted by: ISO
|
Document date: 16 Aug 16
|
Relevant to
|
View full document file for more information
|
GRSG-111-18
Proposal for amendments to ECE/TRANS/WP.29/GRSG/2016/16
Proposal for amendments to ECE/TRANS/WP.29/GRSG/2016/16
|
Reference Number: GRSG-111-18
|
Proposal to add a new condition to paragraph 18.1.7.2. such that the number of filling cycles will be verified at the time of type approval in order to prevent exceeding the maximum number of filling cycles.
|
Submitted by: Japan
|
Document date: 07 Oct 16
|
Document status: Not supported
|
Relevant to
|
View full document file for more information
|
GRSG-111-20
Proposal for amendments to Regulation No. 110
Proposal for amendments to Regulation No. 110
|
Reference Number: GRSG-111-20
|
Proposal to correct the definition of “manual valve”, including deletion of the phrase “rigidly fixed to the cylinder or tank”.
|
Submitted by: Netherlands
|
Document date: 07 Oct 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|
GRSG-111-25
Structure of ISO Technical Committee on specific aspects for gaseous fuels
GRSG-111-31
International Association of Fire and Rescue Services (CTIF)
International Association of Fire and Rescue Services (CTIF)
|
Reference Number: GRSG-111-31
|
Presentation on CTIF cooperation with Euro NCAP, ISO, and others to encourage consideration of fire and rescue worker needs in responding to accidents (e.g., clear marking of vehicle propulsion system, post-crash occupant accessibility and extraction, protection against hazards).
|
Submitted by: CTIF
|
Document date: 12 Oct 16
|
View full document file for more information
|
GRSG-111-02/Rev.1
Revised rationale for the proposed amendments to Regulation No. 110
Revised rationale for the proposed amendments to Regulation No. 110
|
Reference Number: GRSG-111-02/Rev.1
|
Proposal to - Update the standards to note that all references to standards are always to the latest version unless stated otherwise.
- Update Annex II with: Series of PRD/TPRD’s are not allowed
- Update A.24 with the pressure relief device shall comply with the requirements given in annex 4A for the specific type
- Update Annex 4A para 4 and para 7 with reference to ISO15500-13.
|
Submitted by: ISO
|
Document date: 02 Nov 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|
GRSG/2016/16
Proposal for amendments to Regulation No. 110
Proposal for amendments to Regulation No. 110
|
Reference Number: GRSG/2016/16
|
Proposal to allow for the use of natural gas refrigeration systems to vehicles propelled by natural gas (CNG or LNG). This proposal addresses a new, environmentally friendly natural gas fuelled refrigeration system for trucks with refrigerated loads that already are propelled by natural gas. Currently paragraph 18.1.7.1 allows heating systems to be fitted on vehicles to heat the passenger compartment and/or the load area of a vehicle, however, the same provision omits cooling systems that are used on trucks for the carriage of loads requiring refrigeration.
|
Submitted by: France
|
Document date: 22 Jul 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|
GRSG-111-18
Proposal for amendments to ECE/TRANS/WP.29/GRSG/2016/16
Proposal for amendments to ECE/TRANS/WP.29/GRSG/2016/16
|
Reference Number: GRSG-111-18
|
Proposal to add a new condition to paragraph 18.1.7.2. such that the number of filling cycles will be verified at the time of type approval in order to prevent exceeding the maximum number of filling cycles.
|
Submitted by: Japan
|
Document date: 07 Oct 16
|
Document status: Not supported
|
Relevant to
|
View full document file for more information
|
GRSG-111-02
Rationale for the proposal to align Regulation No. 110 with ISO 11439:2013
Rationale for the proposal to align Regulation No. 110 with ISO 11439:2013
|
Reference Number: GRSG-111-02
|
Detailed review of the proposed changes to UN R110.
|
Submitted by: ISO
|
Document date: 28 Jul 16
|
Relevant to
|
View full document file for more information
|
GRSG-111-02/Rev.1
Revised rationale for the proposed amendments to Regulation No. 110
Revised rationale for the proposed amendments to Regulation No. 110
|
Reference Number: GRSG-111-02/Rev.1
|
Proposal to - Update the standards to note that all references to standards are always to the latest version unless stated otherwise.
- Update Annex II with: Series of PRD/TPRD’s are not allowed
- Update A.24 with the pressure relief device shall comply with the requirements given in annex 4A for the specific type
- Update Annex 4A para 4 and para 7 with reference to ISO15500-13.
|
Submitted by: ISO
|
Document date: 02 Nov 16
|
Document status: Superseded
|
Relevant to
|
View full document file for more information
|