Proposal to delete the 2m width requirement for parking lamps, to allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to enable the approval of reversing projections (projection of patterns on the road).

Proposal to delete the 2m width requirement for parking lamps, allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to introduce provisions for reversing projections (projection of patterns on the road).

Proposal to delete the 2m width requirement for parking lamps, to allow the installation of side-marker lamps combined with retro-reflectors on the lateral foremost position on semi-trailers, and to enable the approval of reversing projections (projection of patterns on the road).

Proposal to:

• Clarify that only light-signalling devices may incorporate an illuminated logo
• Align UN R48 with 01 series of amendments to R148 and R149.

Proposal to correct a reference to the 01 series of amendments to UN Regulation No. 148 and align UN R48 from the 03 to the 08 series of amendments with 01 series of amendments to UN Regulations Nos.148 and 149.

Proposal to correct a reference to the 01 series of amendments to UN R148 and to align UN R48 with the 01 series of amendments to UN R148 and R149.

Proposal to:

• Align UN R48 with updated requirements in UN R149 with regard to light sources and total objective luminous flux
• Replace the term “LED module” with “Light source module”
• Modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination across UN R48 series
• Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align the requirements in UN R48 with updated requirements in UN R149 (e.g., require the communication form to indicate whether the total objective luminous flux of one or more light source(s) or light source module(s) for a dipped beam exceeds 2,000 lumens)
• Replace the term “LED module” with “Light source module” and modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination between the 06, 07, 08 series and the 09 series of amendments to UN R48
Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align the requirements in UN R48 with updated requirements in UN R149 (e.g., require the communication form to indicate whether the total objective luminous flux of one or more light source(s) or light source module(s) for a dipped beam exceeds 2,000 lumens)
• Replace the term “LED module” with “Light source module” and modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination between the 06, 07, 08 series and the 09 series of amendments to UN R48
Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align UN R48 with UN R149 with regard to light sources and objective luminous flux
• Replace the term “LED module” with “Light source module”
• Align he requirements for off-road vehicles passing-beam vertical inclination across the 06, 07, 08 series and the 09 series
• Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources
• Remove the double requirement for a sum of reference marks and a sum of maximum luminous intensities.

Proposal to correct and clarify the failure provisions and provisions for matched pairs, ensure consistent use of the term “daytime running lamp” throughout the text, and to make corrections which inter alia re-insert parts of paragraphs 6.5.7. and 6.18.9.that were unintentional omitted in previous amendments.