Proposal to:

• Insert new para. 6.1.1.9. exempting mirrors with lower edge mounted not less than 2 m above ground at maximum technical permissible mass from requirements of para. 6.1.1.3.,
• Amend para. 6.2.2.1.2. to specify requirements for external surface parts protruding less than 5 mm with blunted outward facing angles,
• Insert new para. 6.2.2.1.2.1. permitting dimension of projection determination by direct measurement or drawing reference,
• Insert new para. 6.2.2.1.2.2. establishing measurement by maximum variation of 100 mm diameter sphere distance,
• Amend para. 6.2.2.1.3. to exempt fixing holes or recesses with diameter or longest diagonal less than 12 mm from radius requirements if blunted,
• Amend para. 6.2.2.1.4. to exempt camera and monitor parts installed outside vehicle made of material with Shore A hardness less than 60,
• Amend para. 6.2.2.1.5. to limit requirements for internal camera and monitor parts made of material with Shore A hardness less than 50 mounted on rigid support to support only,
• Insert new para. 6.2.2.1.6. exempting CMS with lower edge mounted not less than 2 m above ground at maximum technical permissible mass from para. 6.2.2.1.1. requirements. Based on GRSG/110 and GRSG/2026/27.