Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more

Wednesday, 8 April 2020 (Week 15)

Please be informed that GAR will undergo maintenance during 11-12 April and may periodically be unavailable.

What's new

Latest Documents

Resources

UN Regulation No. 36
Construction of Large Passenger Vehicles

Uniform Provisions Concerning the Approval of Large Passenger Vehicles with regard to their General Construction

Download the Regulation


Access all 0 headlines (This may take a minute.)

No changes to this regulation are pending.

29 Jul 2019

Bus Interior Materials: Development of Test for Toxicity Assessment | BMFE-07-10

19 Dec 2005

Proposal for the 02 series of amendments to Regulation No. 107 | WP.29/2006/26

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.