Overview of documents and working party activities for the 95th session of the Working Party on Pollution and Energy (GRPE). Documents address improvements to UN R179 (Laboratory Measurement of Brake Emissions for Light Duty Vehicles) including handling of vehicles with limited speed, brake replacement parts regulation, and GTR 24 (Measurement procedures for Brake corner emission factors). Related documents also cover a new regulation for heavy-duty brake emissions and a new global technical regulation for heavy-duty brakes. Working documents ECE/TRANS/WP.29/GRPE/2026/29, ECE/TRANS/WP.29/GRPE/2026/30, ECE/TRANS/WP.29/GRPE/2026/31, ECE/TRANS/WP.29/GRPE/2026/32, and ECE/TRANS/WP.29/GRPE/2026/53 are submitted.
Proposal to amend UN GTR No. 25 by modifying requirements for State-of-Certified Energy (SOCE) monitors, battery performance requirements, in-use verification procedures for Parts A, B, and C, and related test procedures and annexes. The GTR establishes harmonised methods to determine in-vehicle battery durability performance of Heavy-Duty Pure Electric Vehicles (HD-PEVs) and Heavy-Duty Off-Vehicle Charging Hybrid Electric Vehicles (HD-OVC-HEVs) of categories 1-2 and 2 exceeding 3,855 kg technically permissible maximum laden mass. The document includes tracked changes to Amendment 1 (WP.29/2026/209), with sections subject to discussion or decision indicated in square brackets and strikethrough text denoting proposed deletions.
Report on the 95th GRPE session presenting progress updates for UN GTR No. 21 (Determination of Electrified Vehicle Power), UN GTR No. 22 (In-vehicle Battery Durability for Electrified Light-Duty Vehicles), and UN GTR No. 25 (In-vehicle Battery Durability for Electrified Heavy-Duty Vehicles). The IWG on EVE reported on Phase 4 objectives and amendments for GTR 21 and 22, with consideration targets of March 2028, and Phase 3 amendments for GTR 25 with consideration target of March 2027. Future work includes investigations into charging power curves, development of a new WP.29 resolution on DC Fast Charge Power Curve performance, and an inventory on harmonization of recharging capabilities.
Terms of reference for the IWG on A-LCA, which will develop an internationally harmonised procedure to determine the carbon footprint of automotive products across their life cycle from production to use and disposal. Working items include defining scope according to ISO 14040, conducting inventory analysis, and defining the format and minimum contents of the A-LCA report. The IWG mandate ends in December 2026, with possible adoption of the resolution by WP.29 in November 2026. The group is open to all experts from any country or organisation of WP.29, chaired by Japan and Republic of Korea, with technical secretaries from OICA, E-Mobility Europe, and Japan.
The workshop on frontal impact assessment in Tokyo, 4-6 November 2026, will address robustness, defined as the vehicle’s ability to protect occupants of varying body height, weight, shape, and seating position in real-world relevant collisions by maintaining structural integrity and effective safety systems so that the risk of injury is minimized for all types of people. The agenda includes review of relevant regulations, clarification of roles of ATDs and HBMs, and conceptual ideas for future regulatory upgrades addressing brain injury, soft tissue neck injury, lower leg injury, thorax injury, submarining, abdominal loading, and lower severity collisions. The workshop will develop an HBM-based robustness assessment matrix to complement current ATD-based requirements.
Draft minutes of the 12th meeting of the UNECE GRSP IWG Equitable Occupant Protection Task Force 2 Rear-end impact held online on 28 September 2026. The group discussed Euro NCAP workshop findings on EvaRID seat performance criteria, including preliminary testing results showing higher NIC values and differences in dummy response compared to BioRID. Topics included preventing sub-optimization when introducing new assessment tools, the role of dynamic testing in regulatory requirements, head-restraint adjustment mechanisms, and virtual testing potential for rear impact assessment. The group identified virtual testing validation and near-term practical improvements as priorities for continued consideration.
The A-LCA IWG has decided not to submit a Working Document due to inability to reach agreement on outstanding issues. The IWG requests GRPE review and acceptance of revised Terms of Reference reflecting a shift toward information and technical exchange rather than developing a Resolution. Key unresolved contradictive issues include definitions, system boundaries, chain of custody, electricity modelling, prospective energy modelling, use stage provisions, deterioration factors, methane leakage, and methodologies for component replacements. Future activities will shift to information exchange with reduced meeting frequency pending establishment of a clear timeline for developing A-LCA methodology.