Proposal to amend Paragraph B to insert new requirement 5.1.3 establishing that the Approval Authority or Technical Service shall refuse to grant type approval regarding cyber security where the vehicle manufacturer has not fulfilled requirements in paragraph 7.3., notably that the Certificate of Compliance for the Cyber Security Management System has not been issued by the same Approval Authority granting the type approval, add explanatory text clarifying that this ensures Article 2(2) of the 1958 Agreement compliance while permitting cooperation between Approval Authorities and acceptance of prior documentation, amend Paragraph K to remove existing guidance text in paragraphs 6.1 and 7.1 regarding Certificate of Compliance issuance and inter-Authority arrangements, and insert statement that no guidance is included regarding paragraph 6 requirements. These changes support proposal GRVA/2026/30.
Proposal to amend UN R160:
At the 77th SLR meeting (Brussels, April 2026), participants reviewed and improved baseline documents for UN Regulations 48, 53, 74, and 86, reflected in SLR-77-08/Rev.1, SLR-77-09, SLR-77-10, and SLR-77-07 respectively. SLR approved a revised proposal to correct errors in Reg. 150-01 (SLR-77-06/Rev.1, superseding GRE-94-02) and a compromise text prohibiting additional lamps unless complying with national requirements. SLR agreed to postpone official document submission to GRE-96 (April 2027) and will submit 11 informal documents to GRE-94, including status report, four baseline documents, four highlights slides, a proposal on technological neutrality, and the revised correction proposal. Discussions on apparent surface, direction indicator visibility, and direction indicator lamp height will resume at SLR-78 (June 2026).
The 2nd Workshop of the Task Force on Virtual Crash Testing is scheduled for September 7, 2026, from 10:00–16:00 CET in Room W 401, Professor-Huber-Platz 02. The agenda includes welcome and workshop objectives, approval of the agenda, context setting on EqOP and the role of TF3, review of ATD limitations and HBM potential, discussion of HBM readiness for EqOP applications, connecting EqOP priorities with ATD limitations and HBM readiness, HBM landscape assessment, and summary of conclusions and next steps.
The document addresses open issues and comments regarding UN R11 and GTR No. 1 concerning emergency door opening. It proposes defining vehicle master control switch as the device bringing onboard electronics from off to normal operation mode, and suggests activating this switch rather than switching ignition on in test procedures. The document defines main power supply as power source(s) and supply path(s) normally used for door system operation, excluding secondary or back-up supply. It raises concerns about secondary or back-up power supply failure occurring in the field before emergencies despite compliant test results. The document discusses objective intuitiveness criteria including visibility, accessibility, discoverability, identification, and operability. It recommends standardized marking for exterior door handles and proposes that door opening and closing procedures be described in vehicle owners’ manuals.
Proposal to amend UN R74:
Proposal to amend UN R53:
Correction to the justification provided in GRSG/2026/37.
This document is available with tracked changes.