|
GRE will consider a proposal prepared by the expert from the International Automotive Lighting and Light Signalling Expert Group (GTB) that amends light source categories L1A/6 and L1B/6 in the Consolidated Resolution on the common specification of light source categories (R.E.5), together with an associated amendment to UN Regulation No. 128.
|
GRE/2019/15 | UN R128: Proposal for Supplement [10]
|
UN R128: Proposal for Supplement [10]
|
|
Reference Number: GRE/2019/15
|
|
Proposal to insert a minimum luminance gradient as an alternative criteria. The current text requires a certain “asymmetry” of the Light Emitting Area (LEA) in order to ensure a “minimum worst-case gradient”; however, this requirement has been deemed too design-restrictive.
|
|
Submitted by: GTB
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 06 Aug 19
|
|
Document status: Superseded
|
|
Relevant to
|
|
View full document file for more information
|
GRE/2019/16 | RE5: Proposal for amendment [1] to version [2]
|
RE5: Proposal for amendment [1] to version [2]
|
|
Reference Number: GRE/2019/16
|
|
Proposal to amend light source categories L1A/6 and L1B/6 in the Consolidated Resolution on the common specification of light source categories (R.E.5).
|
|
Submitted by: GTB
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 06 Aug 19
|
|
Document status: Approved by GR
|
|
Relevant to
|
|
View full document file for more information
|
GRE-82-12 | H11 substitute interlock solution: Fit & function/Fit & non-function by the “Electrical key-system”
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
GRE-82-17/Rev.2 | Status report of the Task Force on Substitutes/Retrofits
WP.29/2019/81 | UN R148: Supplement 1
|
UN R148: Supplement 1
|
|
Reference Number: WP.29/2019/81
|
|
Proposal to - clarify paragraph 2.1 with regard to definitions: “All the definitions given in the latest series of amendments to UN Regulation No. 48 in force at the time of application for type approval shall apply, unless otherwise specified in this UN Regulation or in the pertinent installation UN Regulations Nos. 53, 74 and 86.”
- amend the inboard visibility angle for rear position lamps in pairs in the new UN Regulation on Light-Signalling Devices (LSD)
- Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
- Testing with LED substitute light sources is exempted from conformity of production control.
- The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
- The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
- The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.
- Introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.
|
|
Meeting Sessions: 179th WP.29 session (12-14
Nov 2019)
|
|
Document date: 27 Aug 19
|
|
Document status: Adopted by WP.29
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2019/81) was adopted by the World Forum. Forty Contracting Parties out of the 55 applying UN R148 were present for the vote by AC.1. Forty voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
|
|
GRE may expect a progress report on the Task Force on Substitutes and Retrofits (TF SR) and will consider their proposals which introduce requirements for light emitting diode (LED) substitute light sources into the new UN Regulation No. [149] on Road Illumination Devices (RID).
|
GRE/2019/19 | UN R149: Proposal for Supplement [1]
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
GRE-82-17/Rev.2 | Status report of the Task Force on Substitutes/Retrofits
GRE-82-17/Rev.2 | Status report of the Task Force on Substitutes/Retrofits
GRE-82-12 | H11 substitute interlock solution: Fit & function/Fit & non-function by the “Electrical key-system”
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
WP.29/2019/81 | UN R148: Supplement 1
|
UN R148: Supplement 1
|
|
Reference Number: WP.29/2019/81
|
|
Proposal to - clarify paragraph 2.1 with regard to definitions: “All the definitions given in the latest series of amendments to UN Regulation No. 48 in force at the time of application for type approval shall apply, unless otherwise specified in this UN Regulation or in the pertinent installation UN Regulations Nos. 53, 74 and 86.”
- amend the inboard visibility angle for rear position lamps in pairs in the new UN Regulation on Light-Signalling Devices (LSD)
- Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
- Testing with LED substitute light sources is exempted from conformity of production control.
- The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
- The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
- The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.
- Introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.
|
|
Meeting Sessions: 179th WP.29 session (12-14
Nov 2019)
|
|
Document date: 27 Aug 19
|
|
Document status: Adopted by WP.29
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2019/81) was adopted by the World Forum. Forty Contracting Parties out of the 55 applying UN R148 were present for the vote by AC.1. Forty voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
|
|
GRE is also invited to address a proposal by TF SR that introduces a new LED substitute light source category H11/LED in R.E.5.
|
GRE/2019/21 | RE5: Proposal for amendment
|
RE5: Proposal for amendment
|
|
Reference Number: GRE/2019/21
|
|
Proposal from the GRE Task Force on Substitutes/Retrofits to introduce a new light emitting diode (LED) substitute light source category H11/LED for road illumination applications.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 07 Aug 19
|
|
Document status: Formal GR review
|
|
Relevant to
|
|
View full document file for more information
|
GRE-82-12 | H11 substitute interlock solution: Fit & function/Fit & non-function by the “Electrical key-system”
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
WP.29/2019/81 | UN R148: Supplement 1
|
UN R148: Supplement 1
|
|
Reference Number: WP.29/2019/81
|
|
Proposal to - clarify paragraph 2.1 with regard to definitions: “All the definitions given in the latest series of amendments to UN Regulation No. 48 in force at the time of application for type approval shall apply, unless otherwise specified in this UN Regulation or in the pertinent installation UN Regulations Nos. 53, 74 and 86.”
- amend the inboard visibility angle for rear position lamps in pairs in the new UN Regulation on Light-Signalling Devices (LSD)
- Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
- Testing with LED substitute light sources is exempted from conformity of production control.
- The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
- The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
- The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.
- Introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.
|
|
Meeting Sessions: 179th WP.29 session (12-14
Nov 2019)
|
|
Document date: 27 Aug 19
|
|
Document status: Adopted by WP.29
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2019/81) was adopted by the World Forum. Forty Contracting Parties out of the 55 applying UN R148 were present for the vote by AC.1. Forty voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
GRE-82-17/Rev.2 | Status report of the Task Force on Substitutes/Retrofits
GRE-82-12 | H11 substitute interlock solution: Fit & function/Fit & non-function by the “Electrical key-system”
GRE-82-03 | Substitute light source equivalence guide
|
Substitute light source equivalence guide
|
|
Reference Number: GRE-82-03
|
|
Guide prepared by the GRE Substitutes/Retrofits Task Force to criteria for specifying LED substitute light source categories as equivalents for corresponding fliament light source categories.
|
|
Meeting Sessions: 82nd GRE session (22-25
Oct 2019)
|
|
Document date: 13 Aug 19
|
|
Relevant to
|
|
View full document file for more information
|
|